36" Professional Range
RGV2-364GD, RGV2-366 , RDV2-364GD, RDV2-366
Key Design Decisions517
Ventilation Requirements618
36" Professional Range
RGV2-364GD, RDV2-364GD
Product & Cavity Dimensions719
Clearance Dimensions820
Cavity Preparation921
36" Professional Range
RGV2-366, RDV2-366
Product & Cavity Dimensions1022
Clearance Dimensions1123
PAGE
inmm
Cavity Preparation1224
CONTENTS (continued)
36" Professional Range Backguard
BGRV2-1236
Product Dimensions
36" Professional Range Backguard
BGRV2-3036
Product Dimensions1426
36" Professional Range Backguard
BGRV2-3036H
Product Dimensions1527
PAGE
inmm
IMPERIAL
KEY DESIGN DECISIONS
6" Professional Range
1
INSTALL TYPE
WALL
2
REAR SURFACE
COMBUSTIBLE
3
BACKGUARD OPTIONS
CLEARANCE
NO BACKGUARD
MIN 6"
Model no:
RGV2-364GD, RGV2-366
RDV2-364GD, RDV2-366
BGRV2-1236
LOW THIN BACKGUARD
CUSTOM
BACKGUARD*
MIN 30"
BGRV2-3036H
ANGLED TRIM
(Supplied with
backguard)
HIGH THICK BACKGUARD
WITH ANGLED TRIM
BGRV2-3036
ISLAND
NON COMBUSTIBLE
NO BACKGUARD
MAX 1/2"
CUSTOM FABRICATED* BACKGUARD
*Fabricated from non combustible materials only
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
HIGH THIN BACKGUARD
VENTILATION REQUIREMENTS
Wall Installation
2'' Deep x Unit Width
600–1200 CFM
Island Installation
0'' Deep x Unit Width
600–1200 CFM
6" Professional Range
1
INSTALL TYPE
WALL
HOOD SURROUND MATERIAL
23"
MAX 36"
NON COMBUSTIBLE
30"
MIN 30"
2
23"
COMBUSTIBLE
30"
MIN 36"
Model no:
RGV2-364GD, RGV2-366
RDV2-364GD, RDV2-366
Specifications
Ventilation Unit
Hood
Blower
Ventilation Unit
Hood
Blower
Note: A suitable hood must be installed above the range. The above indicates
the minimum blower capacity recommended for hood ventilation.
ISLAND
MIN 30"
MAX 36"
NON COMBUSTIBLE
COMBUSTIBLE
MIN 36"
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
B
in
min 5 /4''
max 6 /4''
5 7/8''
29 1/8''
25 1/8''
27 11/16''
1 9/16''
1 /4''
7 /4''
8 1/16''
9 7/16''
28 7/8''
5 1/4''
1 1/4''
5 9/16''
1/16''
19 1/8''
min 1/2''
max 1 1/2''
in
min 5 /4''
max 6 /4''
min 6''
max
25 1/8''
max
27 11/16''
35 7/8''
PRODUCT & CAVITY DIMENSIONS
6" Professional Range
Model no:
RGV2-364GD-N, RGV2-364GD-L
RDV2-364GD-N, RDV2-364GD-L
CABINET FACE FOR
INSTALLATION WITH
PROJECTING CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
FLUSH CONTROL PANEL
DATUM :
TOP OF
COUNTERTOP
K J I H
C
29 1/8''
p
n
PLAN VIEW
C
29 1/8''
F
G
Product Dimensions
A Overall height of range (from floor to cooktop,
excludinggrates and vent trim)
B Overall width of range
C Overall depth of range (excluding handle and dials)
D Depth from rear of chassis to cabinetry face - projecting
E Depth from rear of chassis to cabinetry face - flush
F Height from countertop to top of pan supports
G Height from countertop to top of vent trim
H Height from countertop to bottom of control panel
I Height from countertop to top of door
J Height from countertop to center of handle
K Height from countertop to bottom of door
L Height from countertop to bottom of chassis
M Thickness of handle (not including standoffs)
N Width of handle (including standoffs)
O Depth of handle (measured from front of door)
P Depth of open door to cabinetry face - flush
Q Adjustable feet height
m
l
o
5 /4'' 6 /4''
A
Cavity Dimensions
Overall height of cavity
Overall width of cavity
Overall depth of cavity for projecting control panel
Overall depth of cavity for flush control panel
DATUM : BOTTOM OF CHASSIS
0 5 10 20
inches
B
Q
5 7/8''
Dp
E
FRONT VIEWPROFILE VIEW
CABINET FACE FOR INSTALLATION
WITH FLUSH CONTROL PANEL
CABINET FACE FOR INSTALLATION
WITH PROJECTING CONTROL PANEL
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
CAVITY PREPARATION
in
2''
1 1/2''
19''
12''
5''
1 1/2''
6''
RGV Models
120 VAC, 60Hz
8 amp
15 amp circuit
RDV Models
120/240 VAC, 60Hz
21 amp
0 amp circuit
1/2” NPT Minimum 5/8” dia. flex line
Supply Pressure: 6” to 9” W.C.
1/2” NPT Minimum 5/8” dia. flex line
11” to 14” W.C.
6" Professional Range
RGV models
c d
RDV models
eb
FINAL POSITION OF
RANGE AGAINST WALL
ELECTRICAL
GAS
FINAL POSITION OF
RANGE AGAINST WALL
Model no:
RGV2-364GD-N, RGV2-364GD-L
RDV2-364GD-N, RDV2-364GD-L
Location of Electrical and Gas Supply
A Depth of supply area (ie maximum protrusion of
gasconnection from wall)
B Distance from right hand edge of range to supply area
C (RGV) Height of electrical supply area (from floor)
D (RGV) Height of gas supply area (from floor)
E (RGV) Width of supply area
F (RDV) Distance from left hand edge of range to supply area
G (RDV) Height of electrical and gas supply area (from floor)
a
Specifications
Electrical
Supply
Max. Current Draw
Service
Electrical
Supply
Max. Current Draw
Service
Gas – Natural
Connection
Supply Pressure
Gas – LP
Connection
Supply Pressure*
g
fb
0 5 10 20
inches
ELECTRICAL & GAS
A regulator is required at the LP source to provide a maximum pressure
of 14” W.C. to the range regulator.
a
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
B
in
min 5 /4''
max 6 /4''
5 7/8''
29 1/8''
25 1/8''
27 11/16''
1 9/16''
1 /4''
7 /4''
8 1/16''
9 7/16''
28 7/8''
5 1/4''
1 1/4''
5 9/16''
1/16''
19 1/8''
min 1/2''
max 1 1/2''
in
min 5 /4''
max 6 /4''
min 6''
max
25 1/8''
max
27 11/16''
35 7/8''
PRODUCT & CAVITY DIMENSIONS
6" Professional Range
Model no:
RGV2-366-N, RGV2-366-L
RDV2-366-N, RDV2-366-L
CABINET FACE FOR
INSTALLATION WITH
PROJECTING CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
FLUSH CONTROL PANEL
DATUM :
TOP OF
COUNTERTOP
K J I H
C
29 1/8''
p
n
PLAN VIEW
C
29 1/8''
F
G
Product Dimensions
A Overall height of range (from floor to cooktop,
excludinggrates and vent trim)
B Overall width of range
C Overall depth of range (excluding handle and dials)
D Depth from rear of chassis to cabinetry face - projecting
E Depth from rear of chassis to cabinetry face - flush
F Height from countertop to top of pan supports
G Height from countertop to top of vent trim
H Height from countertop to bottom of control panel
I Height from countertop to top of door
J Height from countertop to center of handle
K Height from countertop to bottom of door
L Height from countertop to bottom of chassis
M Thickness of handle (not including standoffs)
N Width of handle (including standoffs)
O Depth of handle (measured from front of door)
P Depth of open door to cabinetry face - flush
Q Adjustable feet height
m
l
o
35 3/4'' 36 3/4''
A
Cavity Dimensions
Overall height of cavity
Overall width of cavity
Overall depth of cavity for projecting control panel
Overall depth of cavity for flush control panel
DATUM : BOTTOM OF CHASSIS
0 5 10 20
inches
B
q
35 7/8''
Dp
E
FRONT VIEWPROFILE VIEW
CABINET FACE FOR INSTALLATION
WITH FLUSH CONTROL PANEL
CABINET FACE FOR INSTALLATION
WITH PROJECTING CONTROL PANEL
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
in
2''
1 1/2''
19''
12''
5''
1 1/2''
6''
RGV Models
120 VAC, 60Hz
5 amp
15 amp circuit
RDV Models
120/240 VAC, 60Hz
18 amp
0 amp circuit
1/2” NPT Minimum 5/8” dia. flex line
Supply Pressure: 6” to 9” W.C.
1/2” NPT Minimum 5/8” dia. flex line
11” to 14” W.C.
RGV models
c d
RDV models
eb
FINAL POSITION OF
RANGE AGAINST WALL
ELECTRICAL
GAS
CAVITY PREPARATION
6" Professional Range
Model no:
RGV2-366-N, RGV2-366-L
RDV2-366-N, RDV2-366-L
Location of Electrical and Gas Supply
A Depth of supply area (ie maximum protrusion of
gasconnection from wall)
B Distance from right hand edge of range to supply area
C (RGV) Height of electrical supply area (from floor)
D (RGV) Height of gas supply area (from floor)
E (RGV) Width of supply area
F (RDV) Distance from left hand edge of range to supply area
G (RDV) Height of electrical and gas supply area (from floor)
a
Specifications
Electrical
Supply
Max. Current Draw
Service
Electrical
Supply
Max. Current Draw
Service
g
fb
0 5 10 20
inches
FINAL POSITION OF
RANGE AGAINST WALL
ELECTRICAL & GAS
Gas – Natural
Connection
Supply Pressure
Gas – LP
Connection
Supply Pressure*
A regulator is required at the LP source to provide a maximum pressure
of 14” W.C. to the range regulator.
a
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
PRODUCT DIMENSIONS
in
10 /8''
15 15/16''
5 7/8''
''
5 9/16''
''
BGRV2-1236NOT TO SCALE
Model no:
BGRV2-1236
Product Dimensions
A Height of backguard above vent trim on range
B Overall height of backguard
C Overall width of backguard
D Overall depth of backguard
E Height of backguard below vent trim on range
F Depth of backguard below vent trim on range
DATUM : BACK OF PRODUCT
c
5 7/8''
6" Professional Range Backguard
1/2
1/16
DATUM : TOP OF
VENT TRIM ON RANGE
RGV2-366/
RDV2-366
(illustrated)
DATUM : BACK OF PRODUCT
1/2''
d
f
PROFILE VIEW
A
10 /8''
e
PLAN VIEW
5 7/8''
c
FRONT VIEW
b
INDICATES PRODUCT DATUM -------------------------------------------
0 5 10 20
inches
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
5 7/8"
in
28 /8"
29 1/8"
5 7/8"
9 5/16"
1/2"
8 1/16"
4"
10 15/16"
17 /8"
5 7/8"
1/16"
1/16"
BGRV2-3036NOT TO SCALE
c
PRODUCT DIMENSIONS
6" Professional Range Backguard
DATUM : BACK OF PRODUCT
e
1/2"
j
RGV2-366/
RDV2-366
(illustrated)
DATUM : BACK OF PRODUCT
d
g
PLAN VIEW
5 7/8"
c
f
Model no:
BGRV2-3036
Product Dimensions
A Height of backguard above vent trim on range
B Overall height of backguard
C Overall width of backguard
D Overall depth of backguard and racks
E Depth of backguard
F Depth of racks
G Width of racks
H Distance from top of backguard to bottom of racks
I Distance from bottom of backguard to bottom of racks
J Distance from top of backguard to top of brackets
K Height of backguard below vent trim on range
L Depth of backguard below vent trim on range
h
AB
28 /8"
PROFILE VIEW
l
0 5 10 20
i
DATUM : TOP OF
VENT TRIM ON RANGE
inches
FRONT VIEW
INDICATES PRODUCT DATUM -------------------------------------------
k
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
in
0''
5 7/8''
10 /8''
26 1/2''
1/2''
2 7/8''
1 5/16'''
9 1/16''
15/16"
5 /8''
18 7/8''
5 7/8"
BGRV2-3036HNOT TO SCALE
B
6" Professional Range Backguard with Angled Vent Trim
PRODUCT DIMENSIONS
DATUM : BACK OF BACKGUARD
1 5/16"
g
RGV2-366/
RDV2-366
(illustrated)
DATUM : BACK OF BACKGUARD
Model no:
BGRV2-3036H
f
c
h
i
PLAN VIEW
5 7/8"
B
Product Dimensions
A Overall height of backguard with angled vent trim
B Overall width of backguard
C Overall depth of backguard and racks
D Height of backguard
E Height of angled vent trim
F Depth of angled vent trim
G Depth of backguard
H Depth of racks
I Width of racks
J Distance from top of backguard to top of racks
K Distance from bottom of angled vent trim to bottom of racks
Note: Angled vent trim supplied with BGRV2-06H.
Remove flat vent trim and replace with angled vent trim.
j
A
0"
d
k
PROFILE VIEW
f
0 5 10 20
DATUM : BOTTOM OF ANGLED VENT TRIM
inches
FRONT VIEW
e
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
METRIC
KEY DESIGN DECISIONS
6" Professional Range
1
INSTALL TYPE
WALL
2
REAR SURFACE
COMBUSTIBLE
3
BACKGUARD OPTIONS
MIN 152mm
CLEARANCE
NO BACKGUARD
Model no:
RGV2-364GD, RGV2-366
RDV2-364GD, RDV2-366
BGRV2-1236
LOW THIN BACKGUARD
CUSTOM
BACKGUARD*
MIN 762mm
BGRV2-3036H
ANGLED TRIM
(Supplied with
backguard)
HIGH THICK BACKGUARD
WITH ANGLED TRIM
BGRV2-3036
ISLAND
NON COMBUSTIBLE
NO BACKGUARD
MAX 24mm
CUSTOM FABRICATED* BACKGUARD
*Fabricated from non combustible materials only
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
HIGH THIN BACKGUARD
VENTILATION REQUIREMENTS
Wall Installation
584mm Deep x Unit Width
600–1200 CFM
Island Installation
762mm Deep x Unit Width
600–1200 CFM
6" Professional Range
1
INSTALL TYPE
WALL
HOOD SURROUND MATERIAL
584mm
MIN
762mm
MAX
914mm
NON COMBUSTIBLE
762mm
2
584mm
COMBUSTIBLE
762mm
914mm
Model no:
RGV2-364GD, RGV2-366
RDV2-364GD, RDV2-366
Specifications
Ventilation Unit
Hood
Blower
Ventilation Unit
Hood
Blower
Note: A suitable hood must be installed above the range. The above indicates
the minimum blower capacity recommended for hood ventilation.
ISLAND
MIN 762mm
MAX 914mm
NON COMBUSTIBLE
COMBUSTIBLE
914mm
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
PRODUCT & CAVITY DIMENSIONS
mm
min 908
max 9
911
740
68
70
40
45
196
204
240
74
895
2
904
77
486
min 1
max 8
mm
min 908
max 9
min 914
max 68
max 70
911
B
Model no:
RGV2-364GD-N, RGV2-364GD-L
RDV2-364GD-N, RDV2-364GD-L
6" Professional Range
CABINET FACE FOR
INSTALLATION WITH
PROJECTING CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
FLUSH CONTROL PANEL
DATUM :
TOP OF
COUNTERTOP
K J I H
C
740
p
n
PLAN VIEW
740
C
F
G
Product Dimensions
A Overall height of range (from floor to cooktop,
excludinggrates and vent trim)
B Overall width of range
C Overall depth of range (excluding handle and dials)
D Depth from rear of chassis to cabinetry face - projecting
E Depth from rear of chassis to cabinetry face - flush
F Height from countertop to top of pan supports
G Height from countertop to top of vent trim
H Height from countertop to bottom of control panel
I Height from countertop to top of door
J Height from countertop to centre of handle
K Height from countertop to bottom of door
L Height from countertop to bottom of chassis
M Thickness of handle (not including standoffs)
N Width of handle (including standoffs)
O Depth of handle (measured from front of door)
P Depth of open door to cabinetry face - flush
Q Adjustable feet height
m
l
o
908 933
A
Cavity Dimensions
Overall height of cavity
Overall width of cavity
Overall depth of cavity for projecting control panel
Overall depth of cavity for flush control panel
DATUM : BOTTOM OF CHASSIS
0 100 200 400
millimetres
q
B
911
Dp
E
FRONT VIEWPROFILE VIEW
CABINET FACE FOR INSTALLATION
WITH FLUSH CONTROL PANEL
CABINET FACE FOR INSTALLATION
WITH PROJECTING CONTROL PANEL
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
CAVITY PREPARATION
mm
51
8
48
05
127
8
152
RGV Models
120 VAC, 60Hz
8 amp
15 amp circuit
RDV Models
120/240 VAC, 60Hz
21 amp
0 amp circuit
1/2” NPT Minimum 5/8” dia. flex line
Supply Pressure: 6” to 9” W.C.
1/2” NPT Minimum 5/8” dia. flex line
11” to 14” W.C.
6" Professional Range
RGV models
c d
RDV models
eb
FINAL POSITION OF
RANGE AGAINST WALL
ELECTRICAL
GAS
FINAL POSITION OF
RANGE AGAINST WALL
Model no:
RGV2-364GD-N, RGV2-364GD-L
RDV2-364GD-N, RDV2-364GD-L
Location of Electrical and Gas Supply
A Depth of supply area (ie maximum protrusion of
gasconnection from wall)
B Distance from right hand edge of range to supply area
C (RGV) Height of electrical supply area (from floor)
D (RGV) Height of gas supply area (from floor)
E (RGV) Width of supply area
F (RDV) Distance from left hand edge of range to supply area
G (RDV) Height of electrical and gas supply area (from floor)
a
Specifications
Electrical
Supply
Max. Current Draw
Service
Electrical
Supply
Max. Current Draw
Service
Gas – Natural
Connection
Supply Pressure
Gas – LP
Connection
Supply Pressure*
g
fb
0 100 200 400
millimetres
ELECTRICAL & GAS
A regulator is required at the LP source to provide a maximum pressure
of 14” W.C. to the range regulator.
a
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
PRODUCT & CAVITY DIMENSIONS
mm
min 908
max 9
911
740
68
70
40
45
196
204
240
74
895
2
904
77
486
min 1
max 8
mm
min 908
max 9
min 914
max 68
max 70
911
B
Model no:
RGV2-366-N, RGV2-366-L
RDV2-366-N, RDV2-366-L
6" Professional Range
CABINET FACE FOR
INSTALLATION WITH
PROJECTING CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
FLUSH CONTROL PANEL
DATUM :
TOP OF
COUNTERTOP
K J I H
C
740
p
n
PLAN VIEW
740
C
F
G
Product Dimensions
A Overall height of range (from floor to cooktop,
excludinggrates and vent trim)
B Overall width of range
C Overall depth of range (excluding handle and dials)
D Depth from rear of chassis to cabinetry face - projecting
E Depth from rear of chassis to cabinetry face - flush
F Height from countertop to top of pan supports
G Height from countertop to top of vent trim
H Height from countertop to bottom of control panel
I Height from countertop to top of door
J Height from countertop to centre of handle
K Height from countertop to bottom of door
L Height from countertop to bottom of chassis
M Thickness of handle (not including standoffs)
N Width of handle (including standoffs)
O Depth of handle (measured from front of door)
P Depth of open door to cabinetry face - flush
Q Adjustable feet height
m
l
o
908 933
A
Cavity Dimensions
Overall height of cavity
Overall width of cavity
Overall depth of cavity for projecting control panel
Overall depth of cavity for flush control panel
DATUM : BOTTOM OF CHASSIS
0 100 200 400
millimetres
q
B
911
Dp
E
FRONT VIEWPROFILE VIEW
CABINET FACE FOR INSTALLATION
WITH FLUSH CONTROL PANEL
CABINET FACE FOR INSTALLATION
WITH PROJECTING CONTROL PANEL
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
mm
51
8
48
05
127
8
152
RGV Models
120 VAC, 60Hz
5 amp
15 amp circuit
RDV Models
120/240 VAC, 60Hz
18 amp
0 amp circuit
1/2” NPT Minimum 5/8” dia. flex line
Supply Pressure: 6” to 9” W.C.
1/2” NPT Minimum 5/8” dia. flex line
11” to 14” W.C.
RGV models
c d
RDV models
eb
FINAL POSITION OF
RANGE AGAINST WALL
ELECTRICAL
GAS
CAVITY PREPARATION
6" Professional Range
Model no:
RGV2-366-N, RGV2-366-L
RDV2-366-N, RDV2-366-L
Location of Electrical and Gas Supply
A Depth of supply area (ie maximum protrusion of
gasconnection from wall)
B Distance from right hand edge of range to supply area
C (RGV) Height of electrical supply area (from floor)
D (RGV) Height of gas supply area (from floor)
E (RGV) Width of supply area
F (RDV) Distance from left hand edge of range to supply area
G (RDV) Height of electrical and gas supply area (from floor)
a
Specifications
Electrical
Supply
Max. Current Draw
Service
Electrical
Supply
Max. Current Draw
Service
g
fb
0 100 200 400
millimetres
FINAL POSITION OF
RANGE AGAINST WALL
ELECTRICAL & GAS
Gas – Natural
Connection
Supply Pressure
Gas – LP
Connection
Supply Pressure*
A regulator is required at the LP source to provide a maximum pressure
of 14” W.C. to the range regulator.
a
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
PRODUCT DIMENSIONS
mm
26
405
911
1
142
1
BGRV2-1236NOT TO SCALE
Model no:
BGRV2-1236
Product Dimensions
A Height of backguard above vent trim on range
B Overall height of backguard
C Overall width of backguard
D Overall depth of backguard
E Height of backguard below vent trim on range
F Depth of backguard below vent trim on range
DATUM : BACK OF PRODUCT
911
c
6" Professional Range Backguard
DATUM : TOP OF
VENT TRIM ON RANGE
RGV2-366/
RDV2-366
(illustrated)
DATUM : BACK OF PRODUCT
1
d
f
PROFILE VIEW
26
PLAN VIEW
911
c
A
b
e
FRONT VIEW
INDICATES PRODUCT DATUM -------------------------------------------
0 100 200 400
millimetres
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
912
mm
720
740
911
27
1
224
864
278
442
149
20
1
BGRV2-3036NOT TO SCALE
c
PRODUCT DIMENSIONS
6" Professional Range Backguard
DATUM : BACK OF PRODUCT
e
1
j
RGV2-366/
RDV2-366
(illustrated)
DATUM : BACK OF PRODUCT
d
g
PLAN VIEW
912
c
f
Model no:
BGRV2-3036
Product Dimensions
A Height of backguard above vent trim on range
B Overall height of backguard
C Overall width of backguard
D Overall depth of backguard and racks
E Depth of backguard
F Depth of racks
G Width of racks
H Distance from top of backguard to bottom of racks
I Distance from bottom of backguard to bottom of racks
J Distance from top of backguard to top of brackets
K Height of backguard below vent trim on range
L Depth of backguard below vent trim on range
h
AB
720
PROFILE VIEW
0 100 200 400
l
i
DATUM : TOP OF
VENT TRIM ON RANGE
millimetres
FRONT VIEW
INDICATES PRODUCT DATUM -------------------------------------------
k
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
912
mm
76
911
264
67
90
72
20
862
16
480
BGRV2-3036HNOT TO SCALE
B
6" Professional Range Backguard with Angled Vent Trim
PRODUCT DIMENSIONS
DATUM : BACK OF BACKGUARD
g
RGV2-366/
RDV2-366
(illustrated)
DATUM : BACK OF BACKGUARD
Model no:
BGRV2-3036H
f
c
h
i
PLAN VIEW
912
B
Product Dimensions
A Overall height of backguard with angled vent trim
B Overall width of backguard
C Overall depth of backguard and racks
D Height of backguard
E Height of angled vent trim
F Depth of angled vent trim
G Depth of backguard
H Depth of racks
I Width of racks
J Distance from top of backguard to top of racks
K Distance from bottom of angled vent trim to bottom of racks
Note: Angled vent trim supplied with BGRV2-06H.
Remove flat vent trim and replace with angled vent trim.
j
A
76
d
f
0 100 200 400
k
DATUM : BOTTOM OF ANGLED VENT TRIM
PROFILE VIEW
millimetres
FRONT VIEW
e
INDICATES PRODUCT DATUM -------------------------------------------
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
IMPORTANT: The product dimensions and specifications
applyat the date of issue. Under our policy of continuous
product improvement, these dimensions and specifications
may change at any time. Dimensions may vary by ±2mm (1/16").
Please read the installation guide for detailed information
oninstalling the product or visit fisherpaykel.com.
April 2018
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.