Fisher Paykel DW24U2I1 User Manual
A
B
C
A
B
C
d
e
f
G
H
I
PRELIMINARY SPECIFICATION GUIDE PANEL READY
Date: 15.07.2018 | Product specifications may vary from those shown in this Preliminary Specification Guide. This document is superseded and will become obsolete upon launch of the product. This Preliminary
Specification Guide should not be used as installation instructions for any product. Further information is required to safely and correctly install the products featured here. Specific installation instructions will be
available with the product on delivery and on our website fisherpaykel.com
BUILT-IN DISHWASHER
SPECIFICATIONS
Model No.
Dimensions
Door Clearance**
Weight
Electrical
Supply
Service
* Measured from the front of product, does not include the custom door panel or handle to be
manufactured and fitted by cabinetmaker.
** Depth of door (widest opening) measured from front of product, does not include the custom door
panel or handle to be manufactured and fitted by cabinetmaker.
F
E
DW24U6I1
DW24U2I1
H 32 1/4 – 34 5/8" x W 23 9/16" x D 21 3/4"*
ADA: 23 7/8"
Standard: 25 5/8"
92 lbs
120V, 60Hz, 8.9A
10 amp circuit
PRODUCT DIMENSIONS
C
B
A
D
D
PLUMBING AND ELECTRICAL
4 15/16"
23 5/8"
SERVICE OUTLET AT REAR EXTENDS
BOTH SIDES, HOSES AND CORDS CAN BE
ROUTED TO EITHER OR BOTH.
REAR OF CAVITY
CAVITY DIMENSIONS: STANDARD INSTALLATION
C
2"
I
H
G
ISO VIEW
Overall height of dishwasher min 32 1/4"
Overall width of dishwasher* 23 9/16" 598
Overall depth of dishwasher**
(excl. custom panel and handle)
Height of door custom panel 26 3/16 – 30" 665 – 762
Width of door custom panel 23 7/16 – 23 13/16" 596 – 605
Depth of door custom panel*** 5/8 – 3/4" 16 – 19
Weight of door custom panel 8.82 – 17.64 lb 4 – 8 kg
Width of toekick custom panel**** 23 7/16 – 23 13/16" 596 – 605
Depth of toekick 1 3/16 – 3 9/16" 30 – 90
Height of floor to bottom of
custom panel
* Not including side seals
** Does not include the custom door panel or handle to be manufactured and fitted by cabinetmaker.
*** 19mm recommended.
**** Dishwasher can be installed with a continuous toekick.
PROFILE VIEW
inches mm
max 34 5/8"
21 3/4" 552
4 – 8" 102 – 203
820
880
A
B
ISO VIEW
inches mm
Overall height of cavity min 32 5/16"
Overall width of cavity* 23 5/8 – 24" 600 – 610
Overall depth of cavity
(including 19mm custom panels)
* Side seals accommodate this cavity width range.
Note: for taller installations a infill bracket will be supplied to cleanly cover gap between top of DW
to benchtop.
max 36 7/16"
min 22 5/8" 574
820
926
Loading...