Fisher & Paykel DE4024P2 PRODUCT SPECIFICATIONS
PRELIMINARY SPECIFICATION GUIDE CONDENSING DRYER, 4 CU FT
OVERVIEW
With no need to vent moisture outside, your condensing
dryer can be incorporated into any laundr y design for a
beautiful laundry.
MODELS
Condensing Dryer, 4 cu ft
DE4024P2
SERIES
Series 7
Condensing Dryer
FEATURES
Auto-sensing technology prevents over-dr ying
1
Gentle tumble for better clothes care
2
Easy installation with a power outlet at the back,
3
allowing a washer to be plugged in
Condensation is collected so there is no need for
4
external venting
Drying rack for items too precious to tumble
5
Large see-through door provides light when loading
6
and inloading laundry
Anti-vibration sides minimize noise
7
ACCESSORIES
Compatible with Existing Stacking Kit 428075
1
866331A Date: 11.08.2020 | Product specifications may vary from those shown in this Preliminary Specification Guide. This document is superseded and will become obsolete upon launch of the product.
This Preliminary Specification Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation
guidance will be available with the product on delivery and on our website fisherpaykel.com
PRELIMINARY SPECIFICATION GUIDE CONDENSING DRYER, 4 CU FT
A
B
c
A
B
C
d
SPECIFICATIONS
Model No. DE4024P2
Dimensions H 1/4 - 5/8" (845 - 854mm)
W 2 7/16" (595mm)
D 25 /8" (640mm)
Weight
without packaging 99.2lbs (45kg)
with packaging 112.4lbs (51kg)
Electrical
Supply 240V
Service 0-amp circuit
Receptacle 4-prong grounding-type
30” (762mm)
201/2” (521mm)
Power outlet
REAR OF CAVITY
PRODUCT DIMENSIONS
A
B
d
FRONT VIEW SIDE VIEW ISO VIEW
in mm
Overall height 1/4 - 5/8 845 - 854
Overall width 2 7/16 595
Overall depth (including
dial and door when closed)
Depth of open door 42 1067
25 /16 640
C
CAVITY DIMENSIONS: STANDARD INSTALLATION
C
A
B
Overall height of cavity* 4-4 7/16 865-874
Overall width of cavity 25 65
Overall depth of cavity 26 /16 665
Minimum cabinetry gap clearance
to adjacent cabinetry (front, sides
and top)
Minimum gap clearance to the rear 1 25
* Depends on feet adjustment.
/4 20
in mm
866331A Date: 1.08.2020 | Product specifications may vary from those shown in this Preliminary Specification Guide. This document is superseded and will become obsolete upon launch of the product.
This Preliminary Specification Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation
guidance will be available with the product on delivery and on our website fisherpaykel.com
Loading...