Fisher & Paykel DD60SCHW7, DD60SCHX7, DD60SCHB7, DD60SCHTW7, DD60SCHTX7 Quick Start Manual

...
Select wash
Power DishDrawer on then select wash program .
Keep this document handy for easy reference.
GB IE
QUICK START GUIDE
DishDrawer
TM
dishwasher (Classic)
Your model
Operating instructions - Starting a wash
Note: each drawer in double models has its own controls and can run independently of the other drawer.
Discard scraps
Scrape large food particles off (e.g. bones, fruit stones) and remove any foreign objects (e.g. toothpicks, strings, paper).
Start wash or set Delay start
Close the drawer and press .
14
5
6
2
3
Load dishes carefully
To help with wash performance, arrange dishes so they are evenly spaced and not nesting.
Check spray arm(s)
Ensure there are no items blocking the spray arm(s) from rotating.
DD70DC(H)TX DD70DC(H)TW DD70DC(H)TM
DD70DC(H)TX DD70DC(H)TW DD70DC(H)TM
a
b
d
c
Add detergent and check rinse aid
Fill the detergent dispenser (a) with powdered detergent and close the dispenser door.
Important!
Do not place liquid detergent or tablets in the detergent dispenser.
If the indicator on its plug (c) flashes bright red, refill the rinse aid dispenser (b) with liquid rinse aid. Make sure you then refit the rinse aid plug back into its original position.
If using a tablet, place it in the cutlery basket (d) or at the bottom of the drawer.
Wash program controls
ECO selector and indicator
Press if you’d like the program to use less energy. The indicator will glow red when an Eco program has been selected. If you require enhanced drying, we do not recommend selecting an Eco program.
Wash program selector
Press to scroll through the wash programs.
STANDARD PROGRAMS - designed to clean and dry your dishes
ECO PROGRAMS - designed to clean your dishes energy-efficiently
HEAVY
Heavily soiled pots, pans and dishes.
HEAVY ECO
Heavily soiled everyday dishes.
FAST
Lightly soiled dishes.
FAST ECO
Lightly soiled, non-greasy dishes.
RINSE
Prevents odors and soils drying on dishes.
DELICATE
Lightly soiled and heat sensitive crockery.
DELICATE ECO
Lightly soiled, non-greasy and heat sensitive crockery.
NORMAL
Dishes with normal soils for optimum performance.
NORMAL ECO
Normal soiled dishes for optimum water and energy use.
Wash program indicators
These show which program is selected.
Main controls and display
Power on/off
Press to turn the dishwasher on or off.
Opening the drawer will automatically turn the dishwasher on for 30 seconds.
Cancel wash/Cancel Delay start
Press to cancel a wash that has already started or to cancel the Delay start setting.
If there is any water in the drawer, it will automatically drain before the dishwasher turns off.
Start/Pause
Press to start, pause, or resume a wash.
After pausing a wash, wait for 3 beeps before opening the drawer. Forcing it open in mid-cycle may cause damage or injury.
Set Delay start
1
Press and hold until
appears on the display, then release. You are now in Delay start mode.
2
Press briefly again, repeating
until the display shows the number of hours you want to delay the start of a wash by (1 to 12 hours).
You have now set Delay start. The wash will start once the delay time is over, provided the drawer is closed.
Keylock
Keylock disables all the buttons – helpful when cleaning the dishwasher.
To activate, press and hold until you hear one beep (3 seconds). The display will show .
To cancel, press and hold until its symbol disappears from the display.
Childlock
Childlock locks the drawer and disables all the buttons, preventing unauthorized use by children.
To activate, press and hold until you hear two beeps (5 seconds). The display will show .
To cancel, press and hold until its symbol disappears from the display.
Stage of wash program (see ‘During and after the wash’)
Time remaining
Delay start mode
Keylock or Childlock is activated
Fault symbols (if these appear, see section ‘If there is a fault’ in your ‘User guide’)
continued over
DD60DCHW7 DD60DCHX7 DD60DCHB7
DD60SCH(T)W7 DD60SCH(T)X7 DD60SCH(T)B7
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher.
How to change the setting of an option
1
CHECK & OPEN
Check that there is no wash underway, press , then open the drawer.
2
ENTER MENU & SCROLL TO OPTION
To enter the menu: press the selector on top first with one finger, then the button on the front with another finger, hold both until one long beep sounds, then release.
You are now in the Rinse aid option of the preference options menu. If you want to change the Rinse aid setting, go to step 3 now. If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press . To know which option you’re in, watch the letters in the display (see table below). When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
3
CHANGE SETTING
Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
you need to press 3 times.
4
SAVE SETTING & QUIT MENU
Press . This will save the new setting and quit the preference options menu.
Option Rinse aid
Water
softener*
Open drawer
auto power-on
Beeps at end
of wash
Closed drawer
autolock
Which option
am I in?
Possible settings
1 to 5 0 to 5 On or Off On or Off On or Off
Example
4 indicators lit = setting is 4
On On On
Off Off Off
During and after the wash
Dos and don’ts of loading
As the wash progresses, the display will count down the minutes remaining and show what stage the program is at (different programs will go through different stages). When the program has finished, the display will show and the dishwasher will beep six times.
You may notice the following noises at the end of the wash. These are all part of normal operation:
In double models, both drawers may be draining simultaneously. The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
A neatly arranged load with evenly spaced dishes helps wash performance.
Sharp or pointed items must be placed horizontally or with sharp edges/points facing down to avoid risk of injury.
Overcrowding reduces wash performance.
Protruding items will stop the internal lid of the dishwasher from sealing properly, which could result in a service call.
Ensure there is enough space between plates. Mix spoons, knives and forks within the cutlery basket to prevent them from nesting.
If plates and cutlery are nesting, they are less likely to be cleaned well.
Ensure that water reaches all items on the adjustable racks.
Dishware is blocking water from reaching items on the adjustable racks.
Dirty dishes Pre-rinsing Washing Rinsing Drying
These lines may remain on after the program has finished to indicate that the drying fan is still running.
min
For more info
For detailed information on the features of your dishwasher
For warranty information
If you…
have any questions or comments need a Fisher & Paykel authorized technician to service your product need replacement parts or accessories want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
GB toll-free, 24/7 0845 066 2200 www.fisherpaykel.co.uk IE toll-free, 24/7 1800 625 174 www.fisherpaykel.ie
590192B 11.12
Option Rinse aid
Water
softener
Open drawer auto
power-on
Beeps at end of
wash
Closed drawer autolock
What does
it do?
Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash. Increase this setting if dishes are wet or streaky after a wash.
Refer to the ‘Water softener’ section of the ‘User guide’ for details.
Your dishwasher is factory-set to automatically power on for 30 seconds whenever you open the drawer. You can turn this setting off.
Your dishwasher is factory-set to beep six times at the end of a wash. You can turn this setting off.
When this setting is on, the drawer will automatically lock 30 seconds after it’s closed. It can then be unlocked by pressing
(unless Keylock or Childlock is also activated). Useful in boats or motor homes.
Preference options
Loading...