Fisher & Paykel DD60SCTM7, DD60DCW7, DD24DCTB7, DD24SCTB7, DD60SCTW7 User Manual

...

DD60DCW7 DD60DCX7 DD60DCM7 DD24DC(T)B7 DD24DC(H)(T)X7 DD24DC(T)W7

DD60SC(T)W7 DD60SC(T)X7 DD60SCTM7 DD24SC(T)B7 DD24SC(H)(T)X7 DD24SC(T)W7

QUICK START GUIDE

DishDrawer

NZ AU US CA

Keep this document handy for easy reference.

For detailed information on the features of your dishwasher, see your ‘User guide’. Before using your dishwasher, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section. For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service & warranty’ booklet.

dishwasher (Classic)

Your model

Note: each drawer in double models has its own controls and can run independently of the other drawer.

Wash program controls

Wash program indicators

These show which program is selected.

Wash program selector

Press to scroll through the wash programs.

STANDARD PROGRAMS - designed to clean and dry your dishes

HEAVY

Heavily soiled pots, pans and dishes.

ECO PROGRAMS - designed to clean your dishes energy-efficiently

HEAVY ECO

Heavily soiled everyday dishes.

NORMAL

Dishes with normal soils for optimum performance.

NORMAL ECO

Normal soiled dishes for optimum water and energy use.

FAST

Lightly soiled dishes.

FAST ECO

Lightly soiled, non-greasy dishes.

DELICATE

Lightly soiled and heat sensitive crockery.

DELICATE ECO

Lightly soiled, non-greasy and heat sensitive crockery.

RINSE

Prevents odors and soils drying on dishes.

ECO selector and indicator

Press if you’d like the program to use less energy. The indicator will glow red when an Eco program has been selected. If you require enhanced drying, we do not recommend selecting an Eco program.

Operating instructions - Starting a wash

Discard scraps

Scrape large food particles off (e.g. bones, fruit stones) and remove any foreign objects (e.g. toothpicks, strings, paper).

Add detergent and check rinse aid

Fill the detergent dispenser (a) with powdered detergent and close the dispenser door.

Main controls and display

Important!

Do not place liquid detergent or tablets in

Load dishes carefully

To help with wash performance, arrange dishes so they are evenly spaced and not nesting.

Check spray arm(s)

Ensure there are no items blocking the spray arm(s) from rotating.

the detergent dispenser.

If the indicator on its plug (c) glows bright red, refill the rinse aid dispenser (b) with liquid rinse aid. Make sure you then refit the rinse aid plug back into its original position.

If using a tablet, place it in the cutlery basket (d) or at the bottom of the drawer.

Select wash

Power the dishwasher on then select wash program .

Start wash or set Delay start

Close the drawer and press .

Power on/off

Press to turn the dishwasher on or off.

Opening the drawer will automatically turn the dishwasher on for 30 seconds.

Cancel wash/Cancel Delay start

Press to cancel a wash that has already started or to cancel the Delay start setting.

If there is any water in the drawer, it will automatically drain before the dishwasher turns off.

Time remaining

Stage of wash program (see ‘During and after the wash’)

Start/Pause

Press to start, pause, or resume a wash.

After pausing a wash, wait for 3 beeps before opening the drawer. Forcing it open in mid-cycle may cause damage or injury.

Set Delay start

Press and hold until

appears on the display, then release. You are now in Delay start mode.

Press briefly again, repeating

until the display shows the number of hours you want to delay the start of a wash by (1 to 12 hours).

You have now set Delay start. The wash will start once the delay time is over, provided the drawer is closed.

Fault symbols (if these appear, see section ‘If there is a fault’ in your ‘User guide’)

Keylock or Childlock is activated

Delay start mode

Keylock

Keylock disables all the buttons – helpful when cleaning the dishwasher.

To activate, press and hold until you hear one beep (3 seconds). The display will show .

To cancel, press and hold until its symbol disappears from the display.

Childlock

Childlock locks the drawer and disables all the buttons, preventing unauthorized use by children.

To activate, press and hold until you hear two beeps (5 seconds). The display will show .

To cancel, press and hold until its symbol disappears from the display.

continued over

During and after the wash

Preference options

As the wash progresses, the display will count down the minutes remaining and show what stage the program is at (different programs will go through different stages). When the program has finished, the display will show and the dishwasher will beep six times.

min

Dirty dishes Pre-rinsing Washing Rinsing Drying Clean dishes -

program has finished

These lines may remain on after the program has finished to indicate that the drying fan is still running.

You may notice the following noises at the end of the wash. These are all part of normal operation:

In double models, both drawers may be draining simultaneously. The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists with drying and uses negligible amounts of energy.

For best drying results, we recommend unloading the dishes once they have cooled.

Dos and don’ts of loading

Sharp or pointed items must be placed horizontally or with sharp edges/points facing down to avoid risk of injury.

Protruding items will stop the internal lid of the dishwasher from sealing properly, which could result in a service call.

You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher.

Option Rinse aid

Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash. Increase

What

does

it do?

this setting if dishes are wet or streaky after a wash.

Water

softener*

Refer to the ‘Water softener’ section of the ‘User guide’ for details.

Open drawer auto

power-on

Your dishwasher is factory-set to automatically power on for 30 seconds whenever you open the drawer. You can turn this setting off.

Beeps at end of

wash

Your dishwasher is factory-set to beep six times at the end of a wash. You can turn this setting off.

Closed drawer autolock Clean dish indication

When this setting is on, the drawer will automatically lock 30 seconds after it’s closed. It can then be unlocked by pressing or Childlock is also activated). Useful in boats or motor homes.

(unless Keylock

When this setting is on,

will remain in the display after a wash to remind you that the dishes are clean. This is useful if you prefer storing clean dishes in your dishwasher, taking out only what you need. When the last clean dish has been removed, press normal operating mode.

to return to

How to change the setting of an option

CHECK & OPEN

Check that there is no wash underway, press , then open the drawer.

ENTER MENU & SCROLL TO OPTION

To enter the menu: press the selector on top first with one finger, then the button on the front with another finger, hold both until one long beep sounds, then release.

You are now in the Rinse aid option of the preference options menu. If you want to change the Rinse aid setting, go to step 3 now. If you want to change the setting of another option, you will need to scroll to that option first.

To scroll to the next option: press . To know which option you’re in, watch the letters in the display (see table below). When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).

A neatly arranged load with evenly spaced dishes helps wash performance.

Ensure there is enough space between plates. Mix spoons, knives and forks within the cutlery basket to prevent them from nesting.

Overcrowding reduces wash performance.

If plates and cutlery are nesting, they are less likely to be cleaned well.

Option Rinse aid

Water

softener*

Open drawer

auto power-on

Beeps at end

of wash

Closed drawer

autolock

Which option

am I in?

Possible

1 to 5 0 to 5 On or Off On or Off On or Off On or Off

settings

Example

4 indicators lit = setting is 4

CHANGE SETTING

Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,

On On On On

Off Off Off Off

you need to press 3 times.

SAVE SETTING & QUIT MENU

Press . This will save the new setting and quit the preference options menu.

*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.

For more info

For detailed information on the features of your dishwasher

see your ‘User guide’

Clean dish

indication

Ensure that water reaches all items on the adjustable racks.

Dishware is blocking water from reaching items on the adjustable racks.

For warranty information

If you…

have any questions or comments need a Fisher & Paykel authorized

technician to service your product need replacement parts or accessories want to register your product

see your ‘Service and warranty’ booklet

see your ‘Service and warranty’ booklet or contact us

NZ AU

toll-free, 24/7 0800 372 273 www.fisherpaykel.co.nz toll-free, 24/7 1300 650 590 www.fisherpaykel.com.au

USA toll-free, 24/7 1 888 936 7872 www.fisherpaykel.com CA

toll-free, 24/7 1 888 936 7872 www.fisherpaykel.ca

590191A 10.11