Fisher & Paykel BI601-451 User Manual

INSTALLATION INFORMATION FOR QUANTUM BI601/451 SERIES BUILT-IN OVENS

IMPORTANT INFORMATION

Read the instructions before installing or using this
product.

Please make this information available to the person
responsible for installing this oven as soon as possible,
it could reduce your installation cost.

CAUTION

In order to avoid a hazard these products must be installed
according to these instructions for installation.

Please follow installation information carefully. If in doubt
consult your local building authority by-laws.

Failure to install the appliance correctly could invalidate any
warranty or liability claims and lead to prosecution.

The product is to be installed only by an authorised
person.

WARNINGS

The cavity must be a completely sealed box with no gaps.
This will ensure the cooling air flows under the product
to give the correct venting and cooling for the oven and
cabinet surround.

Take care of sharp edges when handling products.

BEFORE YOU START

DO Ensure a suitable disconnection switch is

incorporated in the permanent wiring, positioned to comply
with the Local Wiring Rules and Regulations.

DO Ensure that the location of the oven connection
socket is outside the installation space if the appliance is
flush to the rear wall.

DO Ensure the benchtop and the oven cavity are square
and level.

DO Ensure the electrician allows at least 1.5m free
length of connection cable within the cavity for ease of
installation and service of the oven.

DO Ensure that the interconnection cord between the
cooktop and the oven or control box is not accessible
via cupboard doors after installation. This applies to any
extension cord as well, even though they are double
insulated.

DO Use easy to clean finishes for the wall surfaces
surrounding the oven and cooktop to aid removal of any
cooking fume staining resulting from the use of the oven
and cooktop.

DO Check the height from the floor suits the user.
DO Ensure that drawers and doors will be clear of

obstruction when fully opened.

Part No. 541001 QBI601/451 NZ ERC E September 2001

ASTRO/AERON SINGLE BUILT-IN OVEN SERIES SPECIFICATIONS

SINGLE OVEN SPECIFICATIONS

AERON SINGLE (BI601QAE/QAA) OVEN &

ASTRO SINGLE (BI601QASX/QASE) OVEN

Oven Cabinet

Overall Width 595 mm 568 mm
Overall Height 595 mm 585 mm
Depth 562 mm 550 mm

Note Oven front dimensions

differ from cabinet dimensions.

TOP VIEW FOR ALL

BUILT -IN OVENS

SIDE VIEW

COMPACT OVEN SPECIFICATIONS

ASTRO COMPACT (BI451QASP) OVEN

Oven Cabinet

Overall Width 595 mm 568 mm
Overall Height 450 mm 440 mm
Depth 562 mm 550 mm

Note Oven front dimensions differ from cabinet dimensions.

Note Astro Compact Oven

‘Top View’ is the same as for
Single Ovens.

SIDE VIEW

AERON SINGLE

(BI601QAE/QAA)

&

ASTRO SINGLE

(BI601QASX/QASE)

ASTRO COMPACT

(BI451QASP)

ASTRO DOUBLE BUILT-IN OVEN SERIES SPECIFICATIONS

DOUBLE OVEN SPECIFICATIONS

ASTRO E1.5 (BI601QASE1.5)
DOUBLE OVEN

Oven Cabinet

Overall Width 595 mm 568 mm
Overall Height 932 mm 922 mm
Depth 562 mm 550 mm

Note Oven front dimensions differ from cabinet dimensions.

Note Astro Double & Tower

Ovens ‘Top View’ is the same
as for Single & Compact
Ovens.

SIDE VIEW

TOWER OVEN SPECIFICATIONS

ASTRO E2 (BI601QASE2)
TOWER OVEN

Oven Cabinet

Overall Width 595 mm 568 mm
Overall Height 1078 mm 1068 mm
Depth 562 mm 550 mm

Note Oven front dimensions differ from cabinet dimensions.

SIDE VIEW

ASTRO E1.5

(BI601QASE1.5)

DOUBLE

ASTRO E2

(BI601QASE2)

TOWER

BUILT-IN OVEN INSTALLATION INSTRUCTIONS

CUSTOMER SUPPORT

FLUSH FITTING INSTALLATION OPTIONS

INSTALLATION INSTRUCTIONS

1. Check that the kitchen cavity is square and within the
limits in the installation dimensions.

2. Lift oven and slide into place. Locate oven in the centre
of the cavity, ensuring that the front is flush with surrounding
cabinetry.

3. Secure oven in cavity, using the four ‘wood screws’ and
washers supplied, through the enamelled frame at either
side of the oven.

4. Check that the oven is firmly secured in the kitchen unit.

COOKTOP ABOVE SINGLE OR
COMPACT OVEN

If installing a cooktop above the oven, ensure adequate
clearance is provided for the cooktop as per the Cooktop
Manufacturers Instructions.

Before you call for service or assistance...

Check the things you can do yourself.
Refer to your User Guide and check...

1. Your product is correctly installed.

2. You are familiar with its normal operation.

If after checking these points you still need assistance, please
call your Fisher & Paykel retailer who is trained to provide
information on your product, or if we can be of any further
help, please contact our Customer Care Centre.

FOR NEW ZEALAND

P. O. Box 58550, Greenmount, Auckland.
Toll Free 0800 FP CARE Fax [phone]
(0800 37 2273) Email [e-mail]

FOR AUSTRALIA

P. O. Box 798, Cleveland, QLD 4163.

Toll Free 1300 650 590 Fax [phone]
Tel [phone] Email [e-mail]

FOR UNITED KINGDOM (GB)

Fisher & Paykel Appliances Ltd.
Broxell Close, Wedgnock Industrial Estate, Warwick,
Warwickshire, CV34 6QF.

Tel [phone] Fax [phone]

FOR IRELAND (IE)

C&F Quadrant, Quadrant House, Chapelizod, Dublin 20.

Tel [phone] Fax [phone]

CURRENT INFORMATION

Current Installation Instructions, Product dimensions and
specifications are available on the Fisher & Paykel web site.

www.fisherpaykel.com