Fire-Lite DP-4XF User Manual
l
Use these holes for
Type A:
The DP-4XF Kit includes the dress panel,
four screws, and four stand-offs. To install
the DP-4XF on the 4X backbox, you must
first determine which type of backbox you
have.
DP-4XF
Product Installation Drawing
Document 15619 Rev:A 11/24/92
P/N 15619:A ECN 92-197
Rail
Rail
Stand-off
Cabinet Type A: This backbox has PEM
nuts on the rails inside the box. Screw the
four 1-15/16" standoffs into the nuts in the
rails. Then secure the dress panel with the
screws provided.
Stand-off
Dress Pane
PEM nuts in rail
Type A
cabinet
DP-4XF Dress Panel
Type A:
PEM nuts in rail
Use these holes for
Type A
cabinet
4X Backbox
Type B:
Use these holes for
Rail
l
Dress Pane
Cabinet Type B: This backbox has no
PEM nuts in the rails but rather, has holes
on the top and bottom flanges. Secure the
dress panel to the backbox with the screws
provided.
Rail
Type B
cabinet
NOTE: If the meter option is not to be used,
install the plate with the two screws provided over the meter hole.
Holes in flanges
Use these holes for
Type B
cabinet
DP-4XF Dress Panel
Type B:
Holes in flanges
4X Backbox
Document 15619 Rev:A 11/24/92 P/N 15619:A
Loading...