Fiat Grande Punto Actual 2015 Owner's Manual

FIATPUNTO

OWNER HANDBOOK

Dear Customer,
Thank you for selecting Fiat and congratulations on your choice of a Fiat Punto.
We have written this handbook to help you get to know all the features of your car and use it in the best possible way.
You should read it right through before taking to the road for the first time.
You will find information, tips and important warnings regarding the driving of your car to help you get the most from the techno-

logical features of your Fiat.
Carefully read the warnings and indications, marked with the following symbols:

personal safety;

the car’s wellbeing;

environmental protection.

The enclosed Warranty Booklet lists the services that Fiat offers to its customers:

❒

the Warranty Certificate with terms and conditions for maintaining its validity

❒

the range of additional services available to Fiat customers.

Enjoy the read. Happy motoring!

This Owner Handbook describes all versions of the Fiat Punto;

please consider only the information relevant to your version, engine and configuration.

READ THIS CAREFULLY!

REFUELLING

Petrol engines: refuel only with unleaded petrol with an octane rating (RON) of no less than 95 conforming to

the European specification EN228.

K

STARTING THE ENGINE

PARKING ON FLAMMABLE MATERIAL

Diesel engines: refuel only with diesel fuel conforming to the European specification EN590.

The use of other products or mixtures may damage the engine beyond repair and consequently invalidate the war­ranty, depending on the damage caused.

Petrol engines: make sure that the handbrake is engaged, set the gearshift lever to neutral, fully depress the clutch
without pressing the accelerator, then turn the ignition key to AVV and release it as soon as the engine has started.

Diesel engines: make sure that the handbrake is engaged, set the gearshift lever to neutral, fully depress the clutch
without pressing the accelerator, then turn the ignition key to MAR and wait for the warning lights
go off; turn the ignition key to AVV and release it as soon as the engine has started.

The catalytic converter develops high temperatures during operation. Do not park the vehicle on grass, dry leaves,
pine needles or other flammable material: fire hazard.



Y

and mto

RESPECTING THE ENVIRONMENT

The car is fitted with a system that allows continuous diagnosis of the components correlated with emissions to en­sure better respect for the environment.

ELECTRICAL ACCESSORIES

If, after buying the car, you decide to add electrical accessories (with the risk of gradually draining the battery), visit
a Fiat Dealership. They can calculate the overall electrical requirement and check that the car’s electrical system can
support the required load.

CODE card

Keep it in a safe place, not in the car. You should have the electronic code from the CODE card with you at all
times.

SCHEDULED MAINTENANCE

Correct maintenance of the car is essential for ensuring it stays in tip-top condition and safeguards its safety fea­tures, its environmental friendliness and low running costs for a long time to come.

쇵

THE OWNER’S HANDBOOK CONTAINS…

... important information, advice and warnings for correct use, driving safety and maintenance of your car over time.
Pay special attention to the symbols
to the vehicle).

(personal safety) #(protecting the environment) ! (risk of serious damage

"

CCOONNTTRROOLLSS AANNDD DDEEVVIICCEES

S

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

INDEX

DASHBOARD ...................................................................... 5

SYMBOLS ............................................................................... 6

THE FIAT CODE SYSTEM ................................................. 6

THE KEYS .............................................................................. 8

ALARM ................................................................................... 10

IGNITION ............................................................................. 12

INSTRUMENT PANEL ........................................................ 13

INSTRUMENTS .................................................................... 14

DIGITAL DISPLAY ............................................................... 16

MULTIFUNCTION DISPLAY ............................................ 21

TRIP COMPUTER ................................................................ 30

FRONT SEATS ..................................................................... 32

REAR SEATS .......................................................................... 33

HEAD RESTRAINTS ........................................................... 34

STEERING WHEEL .............................................................. 35

MIRRORS ............................................................................... 35

HEATING AND VENTILATION SYSTEM .................... 37

MANUAL CLIMATE CONTROL SYSTEM .................... 41

EXTERIOR LIGHTS ............................................................. 47

WINDOW CLEANING ..................................................... 49

CEILING COURTESY LIGHTS ......................................... 51

CONTROLS ........................................................................ 53

FUEL CUT-OFF SYSTEM ................................................... 55

INTERIOR FITTINGS........................................................... 56

SKYDOME SUNROOF ....................................................... 60

DOORS .................................................................................. 62

ELECTRIC WINDOW OPENING ................................. 65

BOOT ..................................................................................... 67

BONNET ............................................................................... 70

ROOF RACK/SKI RACK .................................................... 71

HEADLIGHTS ....................................................................... 72

ABS SYSTEM ......................................................................... 74

ESP SYSTEM .......................................................................... 75

EOBD SYSTEM ..................................................................... 78

“DUAL DRIVE” ELECTRIC POWER

STEERING SYSTEM ............................................................. 79

START&STOP SYSTEM ...................................................... 81

SYSTÈME GEAR SHIFT INDICATOR ............................. 86

SOUND SYSTEM ................................................................. 87

ABILITY TO INSTALL A PORTABLE

NAVIGATION SYSTEM ..................................................... 88

ACCESSORIES PURCHASED BY THE OWNER ......... 88

REFEULLING THE CAR ..................................................... 90

PROTECTING THE ENVIRONMENT ........................... 91

4

DASHBOARD

The presence and position of the controls, the instruments and the indicators may vary according to the versions.

F0M0400m

fig. 1

1. Adjustable side air vents – 2. Fixed side air vents – 3. Left-hand lever: exterior lights control – 4. Instrument panel – 5. Right­hand lever: front and rear windscreen wiper controls, trip computer – 6. Controls on dashboard – 7. Adjustable central air vents
– 8. Fixed upper air vent – 9. Front airbag, passenger side – 10. Glove compartment – 11. Sound system (for versions/markets
where provided) – 12. HVAC controls – 13. Ignition – 14. Front airbag, driver’s side – 15. Steering wheel adjustment lever
– 16. Controls display: fog light/rear fog lamp/headlamp alignment adjustment/digital display/multifunction display.

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

INDEX

5

MESSAGES

SYMBOLS

THE FIAT CODE SYSTEM

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

Special coloured labels have been attached
near or actually on some of the compo­nents of your Fiat Punto. These labels bear
symbols that remind you of the precau­tions to be taken as regards that particu­lar component.

fig. 2

F0M0005m

The plate summarising the symbols used
can be found under the bonnet fig. 2.

This is an electrical engine locking sys­tem which increases protection against
an attempted theft of the car. It is auto­matically activated when the ignition key
is extracted.

Each key contains an electronic device
which modulates the signal emitted dur­ing ignition by an antenna built into the
ignition device. This signal is the ‘pass­word’ which changes at each ignition and
which the control unit uses to recognise
the key and enable ignition.

INDEX

6

OPERATION

Each time the vehicle is started turning the
ignition key to MAR, the Fiat CODE sys­tem control unit sends a recognition code
to the engine control unit to deactivate
the inhibitor.

The code is sent only if the Fiat CODE
system control unit has recognised the
code transmitted from the key.

Each time the ignition key is turned to
STOP, the Fiat CODE system deactivates
the functions of the engine control unit.

If the code has not been recognised cor­rectly, the warning light

turns on ac-

Y

companied by the related message on the
display.

In this case, turn the key to STOP and
then back to MAR; try with the other
keys provided if the problem persists.
Contact a Fiat Dealership if you still can­not start the engine.

Warning light

coming on

Y

when driving

❒

If the warning light Yturns on, this
means that the system is running a self­test (for example for a voltage drop).

❒

If the warning light Ystays on, con­tact a Fiat Dealership.

The electronic components
inside the key may be dam­aged if the key is subjected to
sharp knocks.

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

INDEX

7

SPECIFICATIONS

THE KEYS

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

INDEX

CODE CARD fig. 3

(for versions/markets, where provided)
The car is delivered with two copies of the

ignition key and with the CODE card
which bears the following:

A the electronic code;
B the mechanical key code to be given to

the Fiat Dealership when ordering du­plicate keys.

You should have the electronic code A-
fig. 3 with you at all times.

IMPORTANT In order to ensure com­plete efficiency of the electronic devices
inside the keys, they should never be ex­posed to direct sunlight.

All the keys and the CODE
card must be handed over to
the new owner when selling
the car.

fig. 3

F0M0351m

KEY WITH REMOTE CONTROL
fig. 4

(for versions/markets, where provided)
The metal insert A enables:

❒

the ignition;

❒

the door locks;

❒

the fuel cap lock/release (for versions/
markets, where provided).

To open/close the metal insert, press
button B.

fig. 4

fig.

F0M0394m

WARNING

Press button B only with the

key away from your body,
specifically from your eyes and from
objects which could get damaged (e.g.
your clothes). Do not leave the key
unattended to avoid the button being
accidentally pressed while it is being
handled, e.g. by a child.

Button Ëis used for unlocking the doors
and the boot.

Button Áis used for locking the doors and
the boot.

Button Ris used to open the boot re­motely.

When unlocking the doors, the passenger
compartment lights will come on for
a preset time.

8

CONTROLS

AND DEVICES

SAFETY

fig. 5

F0M0013m

Dashboard LED indications

When locking the doors, LED A-fig. 5
switches on for about 3 seconds and than
starts flashing (deterrence function).

Once doors are locked, if one or more
doors or the boot are not closed cor­rectly, the LED and direction indicators
start flashing quickly.

fig. 6

F0M0395m

REPLACING THE BATTERY
OF THE KEY WITH REMOTE
CONTROL fig. 6

To replace the battery, proceed as fol­lows:

❒

press button A and open the metal in­sert B;

❒

turn the screw C to :using a fine
screwdriver;

❒

take out the battery case D and replace
the battery E, respecting its polarity;

❒

refit the battery case D inside the key
and lock it turning the screw C to Á.

fig. 7

F0M0396m

REPLACEMENT OF REMOTE
CONTROL COVER fig. 7

To replace the remote control cover, fol­low the procedure shown in the diagram.

STARTING

AND DRIVING

WARNING

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

INDEX

9

MESSAGES

CONTROLS

AND DEVICES

SAFETY

Requesting additional
remote controls

The system acknowledges up to 8 remote
controls. Should a new remote control be
necessary, contact a Fiat Dealership, tak­ing with you the CODE card, a personal
identity document and the car’s owner­ship documents.

ALARM

The car alarm system is available at Lin­eaccessori Fiat.

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

INDEX

10

Used batteries are harmful to
the environment. You can dis­pose of them either in the

correct containers as speci­fied by law or by taking them to a Fiat
Dealership, which will deal with their
disposal.

fig. 8

F0M0352m

KEY WITHOUT REMOTE
CONTROL fig. 8

The metal insert of the key A is fixed.
The key operates:

❒

the ignition;

❒

the door locks;

❒

the fuel tank cap lock (for versions/
markets, where provided).

The main functions that can be activated with the keys (with or without remote control) are the following:

Type of key

Key without remote control

Key with remote control

Visual indication

Direction indicators flashing
(only for key with
remote control)

Deterrence LED

Unlocking

the doors

Turn key
anticlockwise
(driver’s side)

Turn key
anticlockwise
(driver’s side)

Press briefly
b

utton Ë

blinks twice

Off

Door locking

from

the outside

Turn key
clockwise
(driver’s side)

Turn key
clockwise
(driver’s side)

Press briefly
button

Á

blinks once

Lit for about
3 seconds followed
by deterrence LED
flashing

Dead Lock

activation

(*)

–

–

Press twice
button

Á

blinks three times

Double flash,
followed by
deterrence
flashing

Unlocking

the boot

–

–

Press briefly
button

R

blinks twice

Deterrence
LED

Opening
windows

(*)

–

–

Hold down
button Ëfor more
than two seconds)

blinks twice

Off

Closing

windows

(*)

–

–

Hold down
button Áfor more
than two seconds)

blinks once

Deterrence
LED

(*) For versions/markets, where provided.
IMPORTANT Window opening operation is a consequence of a door unlocking control; window closing operation is a consequence

of a door locking control.

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

11

INDEX

IGNITION

STEERING LOCK

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

INDEX

The key can be turned to 3 different po­sitions fig. 9:

❒

STOP: engine off, key can be extract­ed, steering locked. Some electrical de­vices (e.g. sound system, central door
locking system, etc.) can function.

❒

MAR: driving position. All electrical
devices can function.

❒

AVV: engine starting (temporary posi­tion).

The ignition device is fitted with an elec­tronic safety system that, in the event the
engine fails to start, turns back the ignition
key to STOP before repeating the start­ing operation.

WARNING

If the ignition device has

been tampered with (e.g. an
attempted theft), have it checked
over by a Fiat Dealership as soon as
possible.

fig. 9

F0M0015m

WARNING

Always remove the key when

you leave your car to pre­vent someone from accidentally op­erating the controls. Remember to
engage the handbrake. Engage first
gear if the car is parked uphill or re­verse if the car is parked downhill.
Never leave children unattended in
the car.

Engagement

When the key is in position STOP, re­move it and turn the steering wheel until
it locks.

Disengagement

Rock the steering wheel slightly as you
turn the key to MAR.

WARNING

Never extract the key while

the vehicle is moving. The
steering wheel would lock automati­cally as soon as it is turned. This also
applies to when the car is towed.

WARNING

It is absolutely forbidden to

carry out any after-market
operation involving steering system or
steering column modifications (e.g. in­stallation of anti-theft device) that
could badly affect performance and
safety, invalidate the warranty and
also result in the car not complying
with regulations.

12

INSTRUMENT PANEL

fig. 10

F0M0535m

Versions with digital display
A Speedometer
B Fuel level gauge with reserve warning

light

C Engine coolant temperature gauge and

excessive temperature warning light

D Rev counter
E Digital display

Versions with multifunction display
A Speedometer
B Fuel level gauge with reserve warning

light

C Engine coolant temperature gauge and

excessive temperature warning light

D Rev counter
E Multifunction display

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

fig. 11

F0M0536m

INDEX

13

INSTRUMENTS

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

Instrument background colour and type
may vary according to the version.

fig. 12

F0M0405m

SPEEDOMETER fig. 12

This shows the speed of the vehicle.

fig. 13

F0M0406m

REV COUNTER fig. 13

The rev counter shows the number of en­gine revolutions per minute.

IMPORTANT The electronic injection
control system gradually shuts off the flow
of fuel when the engine is over-revving, re­sulting in a gradual loss of engine power.

When the engine is idling, the rev counter
may indicate a gradual or sudden increase
of the rate.

This is normal and does not indicate a fault.
It may be caused, for example, by the op­eration of the climate control system or
fan. In these cases, a slow change in revs
is used to protect the battery charge.

INDEX

14

Warning light B may light up (and a mes­sage on the multifunctional display may ap­pear in certain versions) to indicate that
the coolant fluid temperature is too high;
in this case, stop the engine and contact
a Fiat Dealership.

CONTROLS

AND DEVICES

SAFETY

fig. 14

F0M0407m

FUEL LEVEL GAUGE fig. 14

This shows the amount of fuel left in
the tank.

E tank empty.
F full tank.

The reserve warning light A turns on to
indicate that approximately 7 litres of
fuel are left in the tank.

Do not travel with the fuel tank almost
empty: the gaps in fuel delivery could dam­age the catalyst.

See the description in the “Refuelling”
paragraph.

IMPORTANT The needle will point to E
and warning light A will blink to indicate
a fault in the system. If this happens, go
to a Fiat Dealership to have the system
checked.

fig. 15

F0M0408m

ENGINE COOLANT
TEMPERATURE GAUGE fig. 15

This shows the temperature of the engine
coolant fluid and starts working when the
fluid temperature exceeds approx. 50°C.

Under normal usage, the needle should
hover around the middle of the scale ac­cording to the working conditions.

C Low engine coolant temperature.
H High engine coolant temperature.

If the needle reaches the red
area, stop the engine imme­diately and contact a Fiat
Dealership.

STARTING

WARNING

IN AN

SERVICE

TECHNICAL

INDEX

15

AND DRIVING

MESSAGES

LIGHTS AND

EMERGENCY

AND CARE

SPECIFICATIONS

DIGITAL DISPLAY

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

STANDARD SCREEN fig. 16

The standard screen shows the following
information:

A Headlamp alignment position (only

with dipped headlamps on).

B Time (always displayed, even with key

extracted and front doors closed)

C Odometer (distance covered in kilo-

metres or miles) and TRIP computer
data.

D Start&Stop indicator (for versions/

markets where provided)

E Gear Shift Indicator (for versions/

markets where provided).

NB With key removed (when opening
one of the front doors) the display turns
on and shows for a few seconds the time
and distance covered.

fig. 16

F0M0537m

CONTROL BUTTONS fig. 17

+ To scroll the displayed menu and the

related options upwards or to in­crease the displayed value.

MENU Press briefly to display the menu
ESC

menu and/or go to next screen
or confirm the required menu
option.

Hold down to go back to the
standard screen.

– To scroll the displayed menu and the

related options downwards or to
decrease the displayed value.

fig. 17

F0M0122m

NB Buttons + and – activate different
functions according to the following sit­uations:

Controlling the car’s interior lights

– on the standard screen, they control in­strument panel brightness, the sound sys­tem and the automatic climate control
system.

Setup menu

– within the menu, they scroll up and
down;

– during settings operations, they increase
or decrease values.

INDEX

16

SETUP MENU

The menu comprises a series of functions
arranged in a circle which can be select­ed through the + and – buttons to access
the different operations and settings de­scribed in the following paragraphs.

The setup menu can be activated by briefly
pressing the MENU ESC button.

Single presses on the + and – buttons will
scroll the setup menu options.

Management modes differ from each oth­er according to the option selected.

Selecting a menu option

– briefly press the MENU ESC button to
select the menu option to set;

– press the + and – buttons (with single
presses) to select the new setting;

– press briefly the MENU ESC button to
store the new setting and go back to the
previous menu option.

Selecting “Set Clock”

– briefly press the MENU ESC button to
select the first value to change (hours);

– press the + and – buttons (with single
presses) to select the new setting;

– briefly press the MENU ESC button to
store the new setting and go to the next
setup menu option (minutes);

– after setting the values with the same
procedure, go back to the previous menu
item.

Hold down the MENU ESC button:

– to quit the setup menu if you are in the
menu;

– to quit to the menu if you are setting
an option;

– to save only the settings already stored
(and confirmed by pressing the MENU
ESC button).

The setup menu page is timed. Only the
changes stored by the user by briefly
pressing the MENU ESC button are
saved when the menu is automatically
closed.

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

INDEX

17

SPECIFICATIONS

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

On the standard screen, briefly press MENU ESC to
start browsing. Press + or – to browse within the menu.
NB For safety reasons, only the short menu may be
accessed while the car is moving (“SPEEd” setting). Stop
the car to access the full menu.

–

–

+

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

INDEX

18

+

+

–

+

–

+

F0M1007i

–

Setting the speed limit (SPEEd)

With this function, it is possible to set the
car speed limit (km/h or mph). When this
limit is exceeded, the driver is immediately
alerted (see section “Warning lights and
messages”).

To set the desired speed limit, proceed as
follows:

– briefly press MENU ESC – the mes­sage (SPEEd) and the previously set unit
(km/h) or (mph) will appear on the display;

– press + or – to activate (On) or deac­tivate (Off) the speed limit;

– if the function is on, press + or – to se­lect the required speed limit and then
press MENU ESC to confirm;

NB The speed may be set in the range
from 30 to 200 km/h, or from 20 to
125 mph according to the previously cho­sen unit (see “Setting the distance unit
(Unit)” below). The setting will in­crease/decrease by five units each time
+/– is pressed. Hold down +/– to in­crease/decrease the setting rapidly. When
you get close to the desired value, finish
the setting with single presses.

– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.

To cancel the setting, proceed as follows:
– briefly press MENU ESC: (On) will

flash on the display;
– press –: (Off) will flash on the display;
– briefly press MENU ESC to return to

the menu screen or hold the button down
to return to the standard screen without
saving.

Setting the clock (Hour)

With this function, it is possible to set the
time.

To do so, proceed as follows:
– briefly press MENU ESC – the “hours”

will flash on the display;
– press + or – to set the value;
– briefly press MENU ESC – the “min-

utes” will flash on the display;
– press + or – to set the value;

– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.

Adjusting the buzzer volume
(BUZZ)

This function is used to adjust the volume
of the buzzer that sounds in the event
of failure/warning indications and when
the MENU ESC, + and – buttons are
pressed.

To set the desired volume, proceed as
follows:

– briefly press MENU ESC – the display
will show the wording (bUZZ);

– press + or – to select the required vol­ume (adjustable over 8 levels).

– briefly press MENU ESC

to return to
the menu screen or hold the button down
to return to the standard screen without
saving.

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

19

INDEX

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

Setting the distance unit (Unit)

With this function, it is possible to set the
distance unit.

To do so, proceed as follows:
– briefly press MENU ESC – the display

will show the wording (Unit) and the pre­viously set unit (km) or (mi);

– press + or – to select the required dis­tance unit.

– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.

Passenger front and side airbag
activation/deactivation (BAG P)

(for versions/markets, where provided)
This function is used to activate/deactivate

the front passenger’s air bag.
Proceed as follows:

❒

press MENU ESC and, after the mes­sage BAG P OFF (to deactivate) or
BAG P On (to activate) is displayed by
pressing buttons + or –, press MENU
ESC again;

❒

the confirmation request message will
be displayed;

❒

press + or – to select YES (confirming
activation/deactivation) or no (to abort);

❒

briefly press MENU ESC to confirm
setting and go back to the menu screen
or hold the button down to go back to
the standard screen without saving.

MENU ESC

+

+

–

–

F0M1002i

MENU ESC

+

+

–

–

F0M1005i

MENU ESC

F0M1001i

F0M1003i

F0M1006i

TECHNICAL

SPECIFICATIONS

INDEX

20

F0M1002i

F0M1003i

MULTIFUNCTION
DISPLAY

(for versions/markets, where provided)

The car can be equipped with the multi­function display that, depending on previ­ous settings, shows useful information
when driving.

STANDARD SCREEN fig. 18

The standard screen shows the following
information:

A Date.
B Odometer (distance covered in km or

miles).

C Time (always displayed, even with key

removed from the ignition and front
doors closed).

D External temperature.
E Headlight alignment position (only

with dipped beam headlights on).

F Start&Stop indicator (for versions/

markets where provided).

G Gear Shift Indicator (for versions/

markets where provided).

NB When one of the front doors is
opened, the display turns on and shows
for a few seconds the time and distance
covered.

fig. 18

F0M0538m

CONTROL BUTTONS fig. 19

+ To scroll the displayed menu and the

related options upwards or to in­crease the displayed value.

MENU Press briefly to display the menu
ESC

and/or go to the next screen or
confirm your choice.

Hold down to go back to the
standard screen.

– To scroll the displayed menu and the

related options downwards or to de­crease the value displayed.

fig. 19

F0M0122m

NB The + and – buttons activate differ­ent functions according to the following
situations:

Controlling the car’s interior lights

– on the standard screen, they control in­strument panel brightness, the sound sys­tem and the automatic climate control
system.

Setup menu

– within the menu, they scroll up and
down;

– during settings operations, they increase
or decrease values.

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

21

INDEX

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

SETUP MENU fig. 20

The menu comprises a series of functions
arranged in a circle which can be select­ed through the + and – buttons to access
the different operations and settings de­scribed in the following paragraphs. A sub­menu is provided for some items (clock
and unit setting).

The setup menu can be activated by briefly
pressing MENU ESC.

Single presses on + or – will scroll the set­up menu options.

Management modes differ from each oth­er according to the option selected.

Selecting an option from the main menu
without a submenu

– Briefly press MENU ESC to select the
main menu option to set.

– Press + or – (with single presses) to se-
lect the new setting;

– briefly press MENU ESC to store the
new setting and go back to the previous
main menu option.

Selecting an option from the main menu with
a submenu:

– briefly press MENU ESC to display the
first submenu option;

– Press + or – (with single presses) to
scroll all the submenu options.

– Briefly press MENU ESC to select the
displayed submenu option and open the
relevant setup menu.

– Press + or – (with single presses) to
select the new setting for this submenu
option.

– briefly press MENU ESC to store the
new setting and go back to the previous
submenu option.

Selecting “Set Date” and “Set time”:

– Briefly press MENU ESC to select the
first value to change (e.g. hours/minutes
or year/month/day).

– Press + or – (with single presses) to se-
lect the new setting;

– Briefly press MENU ESC to store the
new setting and go to the next setup menu
option: if this is the last one you will go
back to the previous menu option.

Hold down MENU ESC:

– to quit the set up menu if you are in the
main menu;

– to quit the main menu if you are in an­other point of the menu (e.g. at submenu
option setting level, at submenu level or
at main menu option setting level);

– to save only the settings already stored
(and confirmed by pressing the MENU
ESC button).

The setup menu environment is timed.
Only the changes saved by the user by
briefly pressing MENU ESC will be
stored when the menu is automatically
closed.

TECHNICAL

SPECIFICATIONS

INDEX

22

Example:

Italiano

Nederland

Polski

MENU ESC

brief press
of the button

Deutsch

Português

English

Français

Español

+

–

On the standard screen, briefly press MENU ESC
to start browsing. Press + or – to browse within
the menu.
NB For safety reasons, only the short menu may be
accessed while the car is moving (“Speed Beep” set­ting). Stop the car to access the full menu.

+

–

EXIT MENU

+

–

–

SPEED BEEP

TRIP DATA B

Example:

Year Month

+

–

Day

MENU ESC

brief press

of the button

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

+

+

–

+

PASSENGER BAG

–

SERVICE

BUTTON VOLUME

–

ALERT VOLUME

+

SET TIME

SET DATE

+

–

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

–

+

SEE RADIO

AUTOCLOSE

DISTANCE UNIT

–

LANGUAGE

–

–

+

–

+

F0M1038g

fig. 20

+

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

INDEX

23

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

SPECIFICATIONS

DISPLAY FUNCTIONS

Speed limit (Speed Beep)

This function is used to set the car speed
limit (km/h or mph); the driver is imme­diately alerted when this limit is ex­ceeded (see section “Warning lights and
messages”).

To set the desired speed limit, proceed as
follows:

– briefly press MENU ESC – the display
will show the wording (Speed Buzz);

– press + or – to select speed limit acti­vation (On) or deactivation (Off);

– if the function is on, press + or – to se­lect the required speed limit and then
press MENU ESC to confirm;

NB The speed may be set in the range from
30 to 200 km/h, or from 20 to 125 mph ac­cording to the previously chosen unit (see
“Setting the distance unit (Unit)” described
below). The setting will increase/decrease
by five units each time +/– is pressed. Hold
down +/– to increase/decrease the setting
rapidly. Complete the setting with single
presses of the button when the required
setting is approached.

– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.

To cancel the setting, proceed as follows:
– briefly press MENU ESC: (On) will

flash on the display;
– press –: (Off) will flash on the display;
– briefly press MENU ESC to return to

the menu screen or hold the button down
to return to the standard screen without
saving.

Trip B activation (tripB data)

This function may be used to activate
(On) or deactivate (Off) the Trip B display
(partial trip).

For more information see the “Trip com­puter” section.

For activation/deactivation, proceed as fol­lows:

– briefly press MENU ESC – On or Off
will flash on the display (depending on pre­vious setting);

– press + or – to make your choice;
– briefly press MENU ESC to return to

the menu screen or hold the button down
to return to the standard screen without
saving.

Setting the clock (Set time)

This function allows you to set the clock
through two submenus: “Time” and
“Mode”.

To carry out the adjustment, proceed as
follows:

– briefly press MENU ESC – the display
will show the two sub-menus “Time” and
“Mode”;

– press + or – to switch between the two
sub-menus;

– select the required option and then
press MENU ESC briefly;

– if selecting “Time”, briefly press MENU
ESC – the “hours” will flash on the display;

– press + or – to set the value;
– briefly press MENU ESC – the “min-

utes” will flash on the display;

INDEX

24

– press + or – to adjust the value;
– if selecting “Mode”, briefly press MENU

ESC – the mode will flash on the display;
– press + or – to select “24h” or “12h”.
When you have made the required ad-

justments, briefly press MENU ESC to
go back to the menu screen or hold the
button down to go back to the main menu
without saving.

– hold MENU ESC down to go back to
the standard screen or main menu, de­pending on where you are in the menu.

Setting date (Set Date)

Using this function it is possible to change
the date (day – month – year).

To update, proceed as follows:
– briefly press MENU ESC – “day” (dd)

will flash on the display;
– press + or – to set the value;
– briefly press MENU ESC – “month”

(mm) will flash on the display;
– press + or – to set the value;
– briefly press MENU ESC – “year”

(yyyy) will flash on the display;
– press + or – to make the adjustment.

NB The setting increases or decreases by
one unit each time + or – is pressed. Hold
the button down to increase/decrease the
setting rapidly. Complete the setting with
single presses of the button when you ap­proach the required setting.

– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.

Initial page (display of information
on the main screen)

(for versions/markets, where provided)
This function allows you to choose the in-

formation you would like to see on the
main screen. You can choose to display the
date or the turbocharger boost pressure.

To make your choice, proceed as follows:
– briefly press MENU ESC – “Initial

page” will appear on the display;
– briefly press MENU ESC once again to

show the display options “Date” and “En­gine info”;

– press + or – to select the information
you wish to see on the main page of the
display;

– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.

When the key is turned to MAR and the
initial check stage is over, the display will
show the information selected via the “Ini­tial page” menu function.

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

INDEX

25

SPECIFICATIONS

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

Audio information
(See sound system)

With this function the display shows in­formation relevant to the sound system.

– Radio: selected radio station frequency
or RDS message, automatic tuning acti­vation or AutoSTore;

– CD, MP3: track number;
– CD Changer: CD number and track

number;
To show the sound system information in

the display (On) or clear it (Off), proceed
as follows:

– briefly press MENU ESC – On or Off
will flash on the display (depending on the
previous setting);

– press + or – to make your choice;
– briefly press MENU ESC to return to

the menu screen or hold the button down
to return to the standard screen without
saving.

Automatic central door locking
with car running (Autoclose)

When activated (On), this function auto­matically locks the doors when the car
speed exceeds 20 km/h.

To activate (On) or deactivate (Off) this
function, proceed as follows:

– briefly press MENU ESC to display
a submenu;

– briefly press MENU ESC – On or Off
will flash on the display (depending on the
previous setting);

– press + or – to make your choice;
– briefly press MENU ESC to go back to

the submenu screen or hold the button
down to go back to the main menu with­out saving.

– hold MENU ESC down again to go
back to the standard screen or main
menu, depending on where you are in the
menu.

Setting measurement units
(Units of measurement)

With this function it is possible to set the
measurement units through three sub­menus: “Distance”, “Consumption” and
“Temperature”.

To set the desired measurement unit, pro­ceed as follows:

– briefly press MENU ESC to display the
three sub-menus;

– press + or – to switch between the
three sub-menus;

– select the required option and then
press MENU ESC briefly;

– if selecting “Distance”: briefly press
MENU ESC and the display will show
“km” or “mi” (depending on the previous
setting);

– press + or – to make your choice;
– if selecting “Consumption”: briefly press

MENU ESC and the display will show
“km/l”, “l/100km” or “mpg” (depending on
the previous setting);

TECHNICAL

SPECIFICATIONS

INDEX

26

If the distance unit set is “km” the fuel con­sumption unit will be displayed in km/l or
l/100km.

If the distance unit set is “mi” the fuel con­sumption unit will be displayed in “mpg”.

– press + or – to make your choice;
– if selecting “Temperature”: briefly press

MENU ESC and the display will show
“C” or “F” (depending on the previous
setting);

– press + or – to make your choice;
When you have made the adjustment,

briefly press MENU ESC to go back to
the sub-menu screen or hold the button
down to go back to the main menu with­out saving.

– hold down MENU ESC again to go
back to the standard screen or main
menu, depending on where you are in the
menu.

Selecting language (Language)

Display messages can be shown in differ­ent languages: Italian, English, German,
Portuguese, Spanish, French, Polish and
Dutch.

To set the required language, proceed as
follows:

– briefly press MENU ESC – the previ­ously set language will flash on the display;

– press + or – to make your choice;
– briefly press MENU ESC to return to

the menu screen or hold the button down
to return to the standard screen without
saving.

Adjusting the failure/warning
buzzer volume (Alert Volume)

This function allows the volume of the
buzzer which accompanies the display of
failures/warnings to be adjusted (over
8 levels).

To set the desired volume, proceed as fol­lows:

– briefly press MENU ESC – the previ­ously set volume level will flash on the dis­play;

– press + or – to set the value;
– briefly press MENU ESC to return to

the menu screen or hold the button down
to return to the standard screen without
saving.

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

TECHNICAL

INDEX

27

SPECIFICATIONS

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

Adjusting the button volume
(Button Vol.)

This function may be used to adjust (over
8 levels) the volume of the noise made
when the MENU ESC, + and – buttons
are pressed.

To set the desired volume, proceed as fol­lows:

– briefly press MENU ESC – the previ­ously set volume level will flash on the dis­play;

– press + or – to set the value;
– briefly press MENU ESC to return to

the menu screen or hold the button down
to return to the standard screen without
saving.

Scheduled Servicing (Service)

Through this function it is possible to dis­play information related to regular sched­uling intervals.

This information can be consulted as
follows:

– briefly press MENU ESC – service in­tervals in km or mi, depending on the
previous setting, will be displayed (see
“Measurement units” section);

– briefly press MENU ESC to go back to
the menu screen or hold the button down
to go back to the standard screen.

NB The “Scheduled Service Plan” re­quires the vehicle to be serviced every
30,000 km (or 18,000 mi). This indication
will appear automatically, with the key at
MAR, starting from 2,000 km (or
1,240 mi) and will be displayed every
200 km (or 124 mi). Below 200 km the sig­nals become more frequent. The indica­tion will appear in kilometres or miles de­pending on the unit of measurement
settings. When the next scheduled service
is approaching, and when the key is turned
to MAR, the message “Service” will ap­pear on the display followed by the num­ber of kilometres or miles left. Go to a Fi­at Dealership, where the “Scheduled
Service Plan” operations will be performed
and the message will be reset.

TECHNICAL

SPECIFICATIONS

INDEX

28

Passenger front and side airbag
activation/deactivation
(Passenger bag)

(for versions/markets, where provided)
This function is used to activate/deactivate

the front passenger’s air bag.
Proceed as follows:

❒

press MENU ESC and, after seeing
messages “Bag pass: Off” (to deactivate)
or “Bag pass: On” (to activate) by
pressing buttons + and –, press MENU
ESC again;

❒

the display will show the confirmation
request message;

❒

press + or – to select either Yes (to
confirm activation/deactivation) or No
(to abort);

❒

briefly press MENU ESC to confirm
setting and go back to the menu screen
or hold the button down to go back to
the standard screen without saving.

MENU ESC

+

+

–

–

F0M1010g

MENU ESC

+

+

–

–

F0M1013g

MENU ESC

F0M1009g

F0M1009g

Menu exit

This function closes the cycle of settings
listed in the menu screen.

Briefly press MENU ESC to go back to
the standard screen without saving.

Press – to return to the first menu option
(Speed Beep).

F0M1011g

F0M1014g

F0M1009g

CONTROLS

AND DEVICES

SAFETY

STARTING

AND DRIVING

WARNING

MESSAGES

LIGHTS AND

IN AN

EMERGENCY

SERVICE

AND CARE

F0M1015g

F0M1016g

TECHNICAL

INDEX

29

SPECIFICATIONS