Festool CLEANTEX CT 36, CLEANTEX CT 26 BROCHURE

Small on the outside, big on the inside.

Mobile dust extractors CLEANTEX CT 26 | CT 36

Tools for the toughest demands

Nobody will ever know how hard

the work really was: the new

CLEANTEX CT 26 | CT 36.

Compact, but also big. Light, but particularly powerful. Just as

uncompromising as it is adaptable: apparent opposites come

together in the new CLEANTEX, which removes all the traces of

work before they can be seen.

With compact dimensions and low weight, bringing greater

flexibility to the building site and the shop floor. With swivel

castors for steering and rear wheels made from specially

designed material for reduced wear. With a locking brake and

precisely balanced, low centre of gravity to ensure stability on

any surface. And with a modular plug-in system for quick and

simple customising – from an additional power socket to an

integrated compressed air port.

For an impressive display of just how big something small can

be, take a look under the removable upper section of the new

CLEANTEX. With a newly developed dust container, the

SELFCLEAN filter bags specially optimised for use with it, and

an in-built, space-efficient flat filter. Driven by a high-power

turbine, these features mean the CLEANTEX picks up signifi-

cantly more dust. Inside and outside, powerful and with consist-

ently high suction, even over long periods of use.

2

www.festool.com

With its modular plug-in system, your CLEANTEX can
be perfectly tailored to suit your specific require­ment s. Compressed air module? Second power
socket? Link to the energy box? Assembly couldn’t be
simpler or more flexible. Saving you valuable work
time.

www.festool.com

3

The challenge: to find more
room inside a compact space.

The crucial factor with any extractor is how much room is
available inside. The new shape of the dust container in the
CLEANTEX provides considerably more volume despite the
smaller overall size of the extractor. The flat filter is posi­tioned outside the dust container and does not protrude into
it.

This room bonus is fully exploited by the new SELFCLEAN
filter bag. Its flexible non-woven material fits seamlessly
into the smooth walls of the container, allowing it to hold
considerably more dust. Thanks to the SELFCLEAN effect,
the filter bag does not clog, keeping suction power constant
until the bag is completely full. On top of that, the space­efficient design of the new turbine guarantees even greater
suction power.

Constant high suction power and up to four times more fine dust with the SELFCLE AN filter bag.

Suction power [%]

CLEANTEX CT 36
with SELFCLEAN
filter bag

Dust extractor with
conventional paper
filter bag

Dust volume [%]

SELFCLEAN filter bagConventional paper filter bag

Source: Festool testing laboratory; test conducted with fine dust

Customary
extr actor with
round filter

CLE ANTEX with
flat filter

4

Full use of available volume: where customary
solutions such as round filters or hood shapes
reduce the total volume, the flat filter doesn’t take
any space away. The gross volume and the net
volume are the same.

Intelligent self-cleaning: thanks to its flexible
non-woven material and the shape of the dust
container, the SELFCLEAN filter bag collapses into
itself when the power is switched off. This shakes
off the dust, preventing it from caking onto the
sides of the bag, which can other wise reduce
suction power and even cause the filter bag to
burst.

www.festool.com

5

6

Practicality comes as standard.

Mobile dust extractors CLEANTEX CT 26 | CT 36.

7

www.festool.com

With the modular plug-in system, every mobile dust extractor can be fitted with
additional modules according to your requirements: you can add a compressed
air module, a power socket with continuous current, a power socket with
automatic electronic switch-on/shut-off, or a module for connecting to a
Festool energy box.*

The flat filter saves so much space that more room is available despite the
smaller size of the unit. The gross volume and the net volume of the mobile dust
extractor are the same.

Super strong and super small: the high-power turbine provides considerably
higher suction power but takes up very little room due to its compact design.

To keep everything tidily stored and protected, the CLEANTEX is equipped with
a cord holder and a hose garage that can also be used to store small tools and
par ts. All Festool systainers in sizes 1-5 and all sortainers c an be latched onto
the Sys-Dock.

The integrated locking brake ensures stability when stationar y. The combina­tion of swivel castors for steering and rear wheel s made from specially
designed material reduces wear and wheel noise. The size of the wheels means
that the CLEANTEX will not easily tip over; its balanced centre of gravity makes
for comfortable and convenient carrying.

The new tear-resistant non-woven filter bags clean themselves by collapsing
inwards when the motor is switched off. This SELFCLEAN effect ensures
constant high suction power until the bag is entirely full. Overall, up to four
times as much fine dust can be extracted using one bag, reducing the number of
filter bags you use.

A new, optimised approach to servicing shortens the time required for
any repairs. The structural design allows faster access to the relevant
spot, whether for a simple castor change, or for a change of the turbine
and its carbon packing gland.

* Module must be fitted by a qualified electrician.

When sanding paint, filler or putty, when assem­bling furniture and laying floors, the CLEANTEX
mobile dust extractors can be relied on to get rid of
all dust. No matter whether you’re using air tools or
power tools.

8

9

www.festool.com

Immaculate work is its hallmark.
Demand nothing less from your
mobile dust extractor.

You can only achieve precise results when you can
see the surface you are working on. That’s where the
new CLEANTEX comes in. It sucks away all dust right
at the point where it is produced. Keeping your view of
the work clear, regardless of whether you are sand­ing, milling or sawing. While also keeping the work­space clean automatically. Which is especially
important for jobs done on the customer’s own
premises.

Since health protection is also a concern when
working on paint, filler, plaster and wood, the new
CLEANTEX filters out 99 percent of all dust in dust
class L (light hazard) and fully 99.9 percent in dust
class M (medium hazard), with a flow sensor included
to monitor suction.

When vacuuming liquids, the LevelStop automatic
level monitor switches off the power before the
unit can overflow.

www.festool.com

9

Items included | Technical data | System accessories

CTL 26 E GB Approved for dust class L 240V: 583499
110V: 583498
CTM 26 E GB 240V Approved for dust class L + M, with flow sensor 584003

CTL 36 E GB Approved for dust class L 240V: 583844
110V: 583843
CTM 36 E GB 240V Approved for dust class L + M, with flow sensor 584004

Features of CT 26 | CT 36

Compact design but large volume•
Can be customised thanks to modular plug-in slot•
High suction power due to space-ef ficient high-power turbine•
Sys-Dock, hose garage and cord holder for tidy work•
Safety when transporting and stability when stationary due to integrated locking brake•
Optimum usage of filter bag volume and constant suction power thanks to SELFCLEAN filter bag•
Optimised ser vicing for time and cost savings•
Fast change of main filter and filter bag, no tools required•
Precise dust extraction due to stepless speed adjustment•
Soft starting, shut-off delay and automatic electronic switch-on/shut-off for power tools and air tools•
No static buildup due to anti-static function•

Technical data CT 26 E

Power consumption 350-1200 W

Max. suction capacity 3900 l/min

Max. v acuum 240 00 Pa / 240 mbar

Filter surf ace area 3060 cm

Rubber-insulated power cord 7.5 m

Container/Filter bag capacity 26 l/ 24 l

Dimensions (L xWxH) 630 x365x54 0 mm

Appl iance socket connected load 240 0 W

Weight 13 kg

Scope of delivery CT 26 E Order no.

1 suction hose D 27x3.5 m AS, 1 SELFCL EAN filter bag, 1 cord holder

CTL 26 E / C TL 26 E (China) Approved for dust class L 583490 / 584 005

CTM 26 E A pproved for dust class L + M, with flow sensor 583848

Key to product code: CTM 36 E LE

CT=CLEANTEX M=dust class 36=dust container volume
E=electronic LE=compressed air model

Design approval Degree of filtr ation, filter system Suitable for

Dust class L > 99% Hazardous dust with max. concentration for occupational exp osure > 1 mg/m

Dust class M > 99.9 % Hazardous dust with max. concentr ation for occupational exposure > 0.1 mg/m

10

Technical data CT 36 E

Power consumption 350-1200 W

Max. suction capacity 3900 l/min

Max. v acuum 240 00 Pa / 240 mbar

2

Filter surf ace area 3060 cm

Rubber-insulated power cord 7.5 m

Container/Filter bag capacity 36 l/34 l

Dimensions (L xWxH) 6 30x365x596 mm

Appl iance socket connected load 240 0 W

Weight 13.5 kg

Scope of delivery CT 36 E Order no.

1 suction hose D 27x3.5 m AS, 1 SELFCL EAN filter bag, 1 cord holder

CTL 36 E / C TL 36 E (China) A pproved for dust class L 583491 / 584006

CTM 36 E / C TM 36 E (China) A pproved for dust class L + M,

with flow sens or

CTL 36 L E Approved for dust cl ass L, compressed air
module with LE compressed air por t

CTM 36 L E Approved for dust cl ass L + M, compressed air
module with LE compressed air por t, flow sensor

and for NON-hazardous dust

and wood dust

584000 / 584007

583846

584002

3

,

2

3

,

Always one of a kind.

www.festool.co.uk

TTS Tooltechnic Systems GB Ltd

Saxham Business Park
Saxham
Bury St Edmunds
Suffolk, IP28 6RX
Great Britain

Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.festool.co.uk

Every mobile dust extractor can be fitted out for a variety
of working applications. The entire range of Festool
system accessories is designed to match, so you can
select and add items to meet your needs. The modular
plug-in system lets you install additional connections for
compressed air, electrical power or the EA A module.

Mobile workstation
The mobile dust extractor can be hooked
up quickly and easily to the extractor
dock on the Toolcenter mobile
workstation.

+ Toolcenter TC 3000/2

Order no. 583881

The air you need
Modular compressed air module for use
with Festool air tools.

+ Compressed air module DL CT 26/36

Order no. 496141

Secure transportation
Systainers in sizes 1-5 and all Sor tainers
can be latched on for transpor ting using
the Sys-Dock.

Accessory holder for nozzles
Insert nozzles (with diameter 36 mm) to
tidy them away.

+ Accessory holder for nozzles

ZBA-D-CT 26/36
Order no. 496373

Damage protection
With the stable CT boom arm, the hose is
guided to the working sur face from above,
without touching the item you are working on.

+ CT boom arm CT-ASA CT 26/36/SB

Order no. 496372

Secure storage
Tool holder for storing a sander directly
on the dust extractor.

+ Tool holder WHR- CT 26/36

Order no. 496122

www.festool.com

11

Technical data Explanations/Dimensions Order no.

1 Longlife filter bag

Longlife-FIS-CT 26

For CT/CTL 26; made from high-strength, long-life, triple-ply non-woven polyester, can
be emptied easily and re -used, only for use when extr acting non-hazardous dust;
package contents: 1 bag.

49612 0

Longlife filter bag
Longlife-FIS-CT 36

2 Main filter

HF-CT 26/3 6

HEPA main filter
HEPA HF-CT 26/ 36

3 Wet filter

NF-CT 26/3 6

4 SELFCLEAN filter bag

SC FIS-CT 26/5

SELFCLEAN filter bag
SC FIS-CT 36/5

5 Compressed air module

Module DL CT 26/36

6 Energy box module

Module EA A CT 26/36

7 Socket module

Module SD CT 26/36

On/of f socket module
Module SD E/A CT 26/36

8 Handle

SB-CT 26/3 6

For CT/CTL 36; ma de from high-s trength, long-life, triple-ply non-w oven polyester, can
be emptied easily and re -used, only for use when extr acting non-hazardous dust;
package contents: 1 bag.

For CT/CTL/CTM 26/36; package content s: 1 filter. 4961 70

For CT/CTL/CTM 26/36, HEPA class 13; package contents: 1 filter. 4961 71

For CT/CTL/CTM 26/36; package content s: 1 filter. 49 6169

For CT/CTL/CTM 26; p ackage contents: 5 bags. 4961 87

For CT/CTL/CTM 36; package contents: 5 bags. 4961 86

For CT/CTL/CTM 26/36; for installation on LE-model mobile dust extractors; w ith
additional automatic air switch-on/shut-off

For CT/CTL/CTM 26/36; for connecting a CT mobile dust ex tractor to the energy box or
ASA; mobile dust extractor must not be L E model

For CT/CTL/CTM 26/36; power socket with continuous current (not available in China) 49614 2

For CT/CTL/CTM 26/36; power socket with automatic electronic switch-on/shut-off (not
available in China)

For CT/CTL/CTM 26/36; for easy pushing of the mobile dust extractor; includes acces sor y
holder ZBA-D-CT 26 /36 for nozzles

49612 1

4961 41

4961 43

49640 5

495802

9 CT boom arm

CT-ASA CT 26/ 36/SB

For CT/CTL/CTM 26/36; tube set with connectors 496372

Technical data Explanations/Dimensions Order no.

10 Ser vice unit

VE-C T 26/36

11 Tool holder

WHR-CT 26/36

12 Toolcenter

TC 3000/2

13 Conversion kit

UBS TC 3000 CT 26/3 6

For LE models of CT/CTL /CTM 26/ 36; comprises quick-release condensate drain,
pressure re gulator, oiler and oil-free air outlet with quick coupling

For CT/CTL/CTM 26/36; tool holder for sanders, made from high-quality stainless steel
for secure and ergonomic storage of a p ower tool or air tool

For CT/CTL/CTM 22 /26/33/36; mobile s anding workstation with extractor dock 583881

For converting TC 30 00, part no. 583285, for use with CT 26/36 496371

495886

49612 2

14 Acces sor y holder for nozzles

ZBA-D-CT 26/36

Set of accessory holder and nozzles
Set ZBA-D-CT 26/36

15 Accessor y holders for nozzles and tubes

ZBA-D/R-CT 26/3 6

For CT/CTL/CTM 26/36; holds 1 floor nozzle D27/D 36 and up to 3 other nozzles 49637 3

For CT/CTL/CTM 26/36; contents: acces sor y holder for nozzles and cleaning nozzle set
492392 (= crevice nozzle D36 FD-210, uphol ster y nozzle D36 PD, suction br ush D36 SP)

For CT/CTL/CTM 26/36, for stor ing a cleaning set D27/D36 (cur ved hand tube, extension
tube in 3 parts, floor nozzle and up to 3 other nozzles)

496369

496370

Suction hose IAS 2 available as accessory.
For other suction hoses and accessories, visit www.festool.com

www.festool.com

13

www.festool.co.uk

TTS Tooltechnic Systems GB Ltd

Saxham Business Park
Saxham
Bury St Edmunds
Suffolk, IP28 6RX
Great Britain

Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.festool.co.uk

Three Years warranty – that means three years security.
More information can be found at www.festool.com

Official supplier to the Ericsson Racing Team for the Volvo
Ocean Race 2008/2009.
More information can be found at www.festool.net/
ericssonracingteam

Deal er

Tools for the toughest demands

Head Office South Africa
TTS Tooltechnic Systems (Pty) Ltd

22-26 Electron Avenue
Isando 1600
Phone [phone]
Fax [phone]
E-mail: [e-mail]

www.festool.co.za

Festool
CT 26 | CT 36

Vali d from Ap ril 200 9

Order no. 60127

Errors and omissions excepted. Products may differ from those
depicted. Prepared for TTS Tooltechnic Systems AG & Co. KG, 73240
Wendlingen, 04/2009