SafeCut™ Rotary Trimmers
Neutron™ / Neutron™ Plus
Proton™
Electron™
Please read these instructions before use.
Veuillez lire ces instructions avant utilisation.
Lea estas instrucciones antes del uso.
fellowes.com
ENGLISH
Electron™
Neutron™/Neutron™ Plus |
Proton™ |
CAPACITIES AND CONTENT
|
|
Number |
Cutting |
Cutting |
Cutting capacity |
CRC # |
Model |
of blades |
Length (mm) |
Length (inch) |
(sheets 20 lb) |
54100 |
Neutron |
1 |
320 |
12 |
10 |
|
|
|
|
|
|
54101 |
Neutron Plus |
4 |
320 |
12 |
10 |
|
|
|
|
|
|
54102 |
Proton 120 |
1 |
320 |
12 |
10 |
54103 |
Proton 180 |
1 |
460 |
18 |
10 |
|
|
Number |
Cutting |
Cutting |
Cutting capacity |
CRC # |
Model |
of blades |
Length (mm) |
Length (inch) |
(sheets 20 lb) |
54104 |
Electron 120 |
4 |
320 |
12 |
10 |
|
|
|
|
|
|
54105 |
Electron 180 |
4 |
460 |
18 |
10 |
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using! |
Electron™ SET-UP |
||
|
|
To operate: |
|
• Caution: blades are extremely sharp. |
|
1. |
Remove battery and cover |
• SafeCut™ cassette encloses blades – do not try to extract blades manually. |
2. |
Remove plastic film |
|
• Always supervise children during use. |
|
3. |
Re-insert battery and cover |
• Do not overload trimmer. |
|
|
|
• Keep pets away from trimmer while in use. |
|
|
|
• Do not open or attempt to repair, as this will void your warranty. Contact Customer |
|
|
|
Service if you have questions. Please note the warranty does not apply in cases of |
|
|
|
abuse, mishandling or unauthorized repair. |
|
|
|
• Do not try to open SafeCut™ blade cartridges. |
|
|
|
CUTTING PAPER AND PHOTOS |
|
|
|
1 |
2 |
3 |
4 |
1. Slide cutting carriage to one end into lock position.
2. Place item (e.g. photo or paper) onto cutting table.
3.Hold paper steady with hand or clamping mechanism. To activate cutting blade, push down carriage handle. (Electron: when pressing handle down, LED will glow)
4. To cut, push handle downwards and slide carriage along until reaching the end of the bar. At the end of the bar, release the carriage and the clamping mechanism will release. For cutting larger capacities press blade harder on side nearest the cutting strip.
2