Page 1
PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT
Customer Service: 1-800-955-0959
VEUILLEZ LIRE CE MANUEL ET LE CONSERVER AVEC LE TALON D’ACHAT
Service clientèle (Canada) : 1-800-665-4339
POR FAVOR, LEA Y GUARDE ESTE MANUAL CON EL RECIBO ORIGINAL
Dpto. de Atención al Cliente: 1-800-955-0959
USE AND CARE MANUAL
MANUEL D’EMPLOI ET D’ENTRETIEN
MODO DE EMPLEO Y DE CUIDADO
PAPER SHREDDER
Personal Series
DESTRUCTEUR DE DOCUMENTS
Série usage personnel
DESTRUCTORA DE DOCUMENTOS
Serie de uso personal
MODELS / MODÈLES / MODELOS
S70-2, P700-2, S50-2, P500-2, P500-2W
Page 2
1
PRODUCT USAGE GUIDE
S70-2, P700-2 S50-2, P500-2, P500-2W
Sheet capacity*: 11 8
Shred type: Strip Strip
Shred size: 1/4" 1/4"
Entry width: 9" 9"
Recommended use: 10-20 shredding passes per day
Maximum running time: 5-7 min. on / 15 minutes off
*Sheet capacity measured with 20 lb., 8-1/2" x 11" paper with the shredder operating at rated voltage.
Different paper weights, humidity, and electrical currents will affect capacity.
CARACTÉRISTIQUES
S70-2, P700-2 S50-2, P500-2, P500-2W
Capacité de destruction (feuilles)* : 11 8
Type des déchets : Bandes Bandes
Dimension des déchets : 6,3 mm 6,3 mm
Largeur d’entrée : 230 mm 230 mm
Emploi recommandé : 10 à 20 passages de feuilles par jour
Cycles d’utilisation conseillés : 5 à 7 minutes marche / 15 minutes arrêt
*Capacité de destruction mesurée pour du papier 20 lb 8-1/2" x 11" (A4/70gsm), le destructeur fonctionnant sur
tension nominale. Les différents grammages du papier, l’humidité et la tension affecteront la capacité.
CARACTERÍSTICAS
S70-2, P700-2 S50-2, P500-2, P500-2W
Capacidad de destrucción (hojas)*: 11 8
Tipo de corte: Tiras Tiras
Dimensión de corte: 1/4" (6,3 mm) 1/4" (6,3 mm)
Ancho de entrada: 9" (230 mm) 9" (230 mm)
Uso recomendado: de 10 a 20 pasadas diarias por la destructora
Tiempo máx. de funcionamiento: 5-7 min. encendido / 15 min. apagado
*La capacidad de destrucción se calculó con hojas de 20 lb. 8-1/2" x 11" (A4/70gsm), con la destructora funcionando al voltaje
nominal. Cambiando el peso del papel, la humedad y el voltaje se afecta tal capacidad.
Page 3
2
IMPORTANT SAFEGUARDS
• NEVER insert hands or fingers into paper entry as serious personal
injury may result.
• THIS MACHINE IS NOT A TOY. Keep children and pets away from
shredder AT ALL TIMES as serious injury may result. Always
unplug shredder when not in use.
• Keep loose objects (jewelry, ties, long hair) away from shredder.
These items and others like them may cause serious injury if they
accidentally fall into the paper entry.
• Do not exceed recommended sheet capacity.
• Do not shred plastic (except credit cards), continuous forms, adhesive labels, transparencies, newsprint, or cardboard.
• This personal shredder is intended for paper only. Do not attempt
to shred paper clips or other hard materials (except staples).
• Do not place shredder near or over a heat source or water.
• Always turn off and unplug unit before moving or cleaning and
when not in use.
• Do not insert aerosol cleaners or lubricants into or around the
s h r e d d e r. Some agents may combust, causing serious injury.
• Do not use this product if it or the cord has been damaged in any
w a y.
• Do not open the cover for any reason. Doing so can expose you to
dangerous voltages and will void your warranty.
Power Cord Care
• Place power cord in an easily accessible position, because it is the
main disconnect switch.
• Do not place machine where adults, children or animals may walk
on the cord.
• Do not rest anything on the power cord.
• If an extension cord is used, be sure that all products plugged
into the extension cord do not exceed the extension cord ampere
r a t i n g.
Figure 1
A. Paper entry
B . B a s ke t
C . A u t o-start sensor
D. Power switch
E. Shredder head
F. V i e w e r
G. Manual forward button
PARTS OF THE SHREDDER
A S S E M B L Y
To assemble shredder head onto baske t
1 . Position shredder head over basket as shown in Figure 1.
2 . Lower shredder head onto basket aligning the rim on the under-
side of the shredder head with the edge of the baske t .
A
B
E
D
F
C
G
Page 4
3
OPERATION
This product features an auto-start sensor. This
sensor will turn on the cutting blades whenever
anything is inserted into the paper entry (while the power switch is in
the
A U TO
(I) position). For the safety of pets and children, we recom-
mend always moving the power switch to
O F F
(O) and unplugging
whenever the shredder is unattended or not in use.
1 . Assemble shredder head to basket (see “A S S E M B L Y”).
2 . Remove any paper clips or other foreign objects (except staples)
from paper. If folding paper to fit paper entry, adjust sheet capacity appropriately.
Do not attempt to shred paper clips or other
hard materials (except staples) with this
machine. Extensive use of paper clips or other hard materials will
result in damage to the cutting system and will void the manufacturer's warranty.
3 . Be sure power switch is in the
O F F
(O) position. Plug shredder
into the proper power supply outlet.
4 . Move power switch to
A U T O
(I) position. As soon as the unit is
turned on, it is in autostart mode, ready to be fed paper through
the paper entry.
NEVER insert hands or fingers into paper entry as
serious personal injury may result.
Do not exceed recommended sheet capacity (see
“ Product Usage Guide” on page 1).
5 . Slide paper s t r a i g h t into paper entry until the shredder auto-
matically begins shredding.
The shredder automatically stops when shredding is complete.
Continue shredding as desired to a MAXIMUM shredding time
of 5-7 minutes. At this time, the machine MUST be allowed to
“cool down” for a MINIMUM of 15 minutes. (See “Cool-
Down Cycle” section for more information.)
If the shredder jams or shuts off before the maximum shredding
time, see “Clearing a Jam” section for further instructions.
6 . Move power switch to
O F F
(O) position when shredding is com-
plete.
7 . Unplug power cord from outlet when shredder is not in use.
8 . Look through viewer to see if basket is full. If full, lift off shredder
head and empty basket contents. Replace shredder head into posi-
tion on baske t .
Cool-Down Cycle
This shredder is protected with a special safety feature which prevents
the motor from overheating with extensive use.
Wh en shredding
is attempted beyond the machin e's maximum run ning time, the shredder will automatically shut off
its motor until it has cooled to an acceptable oper ating level.
This is normal and the shredder will return to opera-
tion after the “cool-d o w n ” period. See “Product Usage Guide” (page
1) for maximum running time and related cooling or “off” time.
Clearing a Jam
If the shredder sheet capacity is exceeded or paper is not put in
straight, a jam may result. See “Product Usage Guide” (page 1) for
maximum sheet capacity for your shredder. In the case of a jam, the
machine will “bog down” and fail to shred the paper.
To clear a jam:
1 . Move the power switch to the R E V E R S E (R) position. (If waste
b a s k et is full, empty it before clearing jam.) The shredder will
reverse the paper to clear the jam.
2 . If the shredder jams in reverse, move the power switch to A U T O
(I), depress the manual forward button and allow to run
for about five seconds. If jam does not clear, move power switch
to REVERSE (R) again and allow to run for about five seconds.
Repeat this procedure until the jam is cleared. If necessary, use
care to grasp the paper and pull out to clear the jam.
3 . Once the jam is cleared, move the power switch to A U TO (I) for
continued shredding or OFF (O) if shredding is complete.
Page 5
4
T R O U B L E S H O O T I N G LIMITED WA R R A N T Y
Fellowes Manufacturing Company (the “Company”) warrants the cutting cylinders of the machine to be free from defects in material and
workmanship for 3 years from the date of purchase by the original
c o n s u m e r. Fellowes warrants all other parts of the machine to be free
of defects in material and workmanship for 1 year from the date of
purchase by the original consumer. If any part is found to be defective
during the warrant period, your sole and exclusive remedy will be
repair or replacement, at Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WA R R A N T Y, INCLUDING THAT OF
M E R C H A N T ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS
HEREBY LIMITED IN DURATION TO THE APPROPRIATE WA R R A N T Y
PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for
any consequential or incidental damages attributable to this product.
This warranty gives you specific legal rights. You may have other
legal rights that vary from state to state.
For more detail or to obtain service under this warranty, please contact Fellowes Customer Service at 1-800-955-0959, Monday through
Fr i d a y, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on
machines purchased outside the USA, contact the appropriate location
listed in the
Contact for Service
section of this instruction manual.
Warrantor: Fellowes, Inc.
a . Shredder is not plugged in.
b . Power switch is in the
O F F
( O )
position. Move switch to
A U T O
( I )
p o s i t i o n .
c . Shredder is jammed. See “Clearing
a Jam” section.
d . Shredder has exceeded the maxi-
mum run time and requires a “coold o w n ” time. See “Product Usage
Guide” (page 1).
a . Shredder has exceeded the
maximum run time and requires a
“ c o o l -d o w n ” time. See “Pr o d u c t
Usage Guide” (page 1).
b . Shredder is jammed. See “Clearing
a Jam” in the OPERATION section.
A small piece of paper may be blocking
the auto-start sensor of this shredder.
Move the power switch to
A U T O
(I) and
depress the manual forward button
for 5 seconds to clear paper blocka g e .
a . Look through viewer to see if baske t
is full. If full, lift shredder head and
empty basket contents. Re p l a c e
shredder head into position on
b a s k e t .
b . A small piece of paper may be
blocking the auto-start sensor of
s h r e d d e r. Move power switch to
A U T O
(I) and depress the manual
forward button for 5 seconds
to clear paper blocka g e .
Shredder will not
o p e r a t e .
Shredder suddenly
stops while
s h r e d d i n g .
Shredder operates
only in REVERSE.
Shredder runs
continuously when
in AUTO.
Fellowes conducts extensive testing to ensure that these shredders are capable of meeting all of the specifications listed in the
Usage Guide. However, the actual sheet capacity is dependent on a number of factors including the type and weight of paper,
the humidity, the voltage level of the power source, the temperature of the motor, and the care with which the operator feeds the
paper. Safety agency testing is conducted to ensure that the shredder will operate to specifications even if the available voltage is
10% below or 6% above the rated voltage.
Model Voltage Hertz Cut Size Number of Sheets Paper Size & Weight
P500-2 220-240VAC 50HZ 6.3mm 7 8.5x11 20 Lb.
P500-2 120V 60Hz 6.3mm 7 8.5x11 20 Lb.
P700-2 220-240VAC 50HZ 6.3mm 10 8.5x11 20 Lb.
P700-2 120V 60Hz 6.3mm 10 8.5x11 20 Lb.
Page 6
© 2002 Fellowes. Printed in China. Form No. 30105B
www.fellowes.com
Contact For Service
Vos Contacts Fellowes
Sus Contactos Fellowes
Australia 1-800-33-11-77
Canada 1-800-665-4339
Mexico 001-800-234-1185
United States 1-800-955-0959
Loading...