Faber IB1200, RB900, INPL3619SS Specsheet

Inca Pro Plus

Built - In Collection

All new versatile pro liner / hood

professional-style liner / insert hood

°

fits custom hoods 36” - 48” wide

°

19” or 22” depth available

°

600 or 1200 internal PRO motor

°

900 or 1200 cfm remote blower

°

stainless steel finish

°

removable grease rail

°

angled baffle filters

°

2 level halogen lights

°

variable speed control dial

°

restaurant style baffle filters

°

convertible to recirculating*

°

sloped front and sides

°

Pro Series

6” or 10” round duct

°

* it is highly recommended that
professional style cooking always be
vented to the outside.

Size Model #

36" Wide X 19" Depth
42" Wide X 19" Depth
48" Wide X 19" Depth
36" Wide X 22" Depth
48" Wide X 22" Depth

INPL3619SS
INPL4219SS
INPL4819SS
INPL3622SS
INPL4822SS

Choose A Blower From Below

Internal 600 cfm blower kit
Internal 1200 cfm blower kit
Remote Blower 900 cfm kit
Remote Blower 1200 cfm kit

New All in one Professional Liner from Faber. For custom
wood cabinet applications, available in three widths and

two depths depending on your needs. With the

flexibility of four blower options, the Inca Pro Plus offers
the power, style and functionality you need for today's
custom pro hood applications.

CFM Reducer

Reduces hood cfm to under 300
cfm. Converts the 6” round duct
to a 5” round. Use in make-up air
environments. For use with 600

IB600

IB1200

RB900

RB1200

cfm motor only.

Charcoal Filters

For recirculating installations, high
quality, heavy duty filters ensure
the removal of smoke and odors
from the kitchen. Some ductwork is
required to exhaust the unit out of
the cabinet.

ACCESSORIES

CFMRED

6093034

p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com

Dimensional Diagrams

0

OVERALL

SIDE

Pre-Planning Your Installation -

Important: Consult the installation instructions before you begin

installing this rangehood. The recommended height to install this hood off the cooktop is a minimum of
30” for maximum effectiveness. Also consult the cooktop manufacturer’s recommendation.

Pre-Planning Your Ductwork - Important: Consult the installation instructions before you begin installing this rangehood.

Make your ductrun as straight and

short as possible. The ductrun should
not exceed 35 equivalent feet if
ducted with the required minimum of
6” round duct. Count 45º angles as 3
feet, 90º elbows as 5 feet, and 90º flat
elbows as 12 feet.

For best results, use no more than
three 90° elbows. Make sure that
there is a minimum of 24” of straight
duct between elbows if more than
one is used. Do not install two
elbows together. If you must elbow
right away, do it as far away from
the hood’s exhaust opening as pos­sible.

WARNING

before you begin installing this rangehood.

! Product specifications are subject to change without notification. Consult the installation instructions

Recirculating Installations

IT IS HIGHLY RECOMMENDED THAT PROFESSIONAL STYLE COOKING
ALWAYS BE VENTED TO THE OUTSIDE. For installations where ductwork to

the outside of your home is impossible or highly impractical Charcoal Filters,
which attach to the blower assembly, absorb smoke and odors.

cabinet

or

custom

hood

duct

work

hood

ceiling

vent grate

cabinet

or

custom

hood

duct

work

vent grate

Some ductwork
must be installed to
exhaust the range­hood back into
the kitchen either
at the top or face
of the cabinet or
wood hood. This
duct work must not
terminate into a
dead air space or
inside the cabinet
or custom hood.

ceiling

Rev. 10/10