Faber CRIS30 User Manual

Cristal HC - Slide Out Range Hood

powerful, practical, efficient under cabinet range hood

Choose from a white, black, or

brushed aluminum front strip (all
are included in the box). For a

totally integrated look, the front
strip can also be replaced with a
custom built strip to match your
cabinets. See reverse for front
panel dimensions.

For a streamlined look in the kitchen, the Cristal HC is your integrated range hood solution. The Cristal HC has a sleek
pull-out visor which slides in, flush with your cabinets, neatly tucking the hood away. For total integration, the front
strip can be replaced with material to match your cabinets, hiding the range hood completely.

Model # Size | Color Performance Range Sound Levels

CRIS30
CRIS36

white, black and brushed aluminum front trims come with every Cristal HC in the box

30 BK,WH,AL
36 BK,WH,AL

170 - 500 CFM
170 - 500 CFM

2.0 - 6.0 sones

2.0 - 6.0 sones

Feature Chart

Cabinet Cut Out 25 1/8” or 31 1/8” (W) x 9 5/8” (D)

Convertible to Recirculating Yes - charcoal kit needed, need air return back

into the kitchen out of the cabinet

Controls 3 Speed Slider

Lighting 1 X 15 (W) Fluorescent

Ducting Top 6” Round

Ducting Direct Rear Vent 6” Round

Grease Filters dishwasher safe mesh

Auto On / Off Yes - fan / lights turn on when pulled out

Integrate front panel Yes - Use your own custom wood front

Built In Mounting Hardware Yes - EasySnap Mounting Clips

AC Input 120 V - 60 hz

AC Power Max 315 W at 2.9 A

Green Energy Saver Mode Yes
Annual Electricty Costs $2.47 / Year *

* Note – ran 30 minutes a day on low speed with the lights on, 365 days, using the North American average of 12.2 cents per kWh.

p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com

3 3/8”

Front View

25 1/2” - 31 1/2”

10”

25 1/2” - 31 1/2”

13/16”

17 1/2” - 23 1/2”

Dimensional Diagrams

(see installation instructions for more information)

Note: The Cristal HC comes standard in the top vent position.

The direct rear vent position can be achieved by rotating the

Cut-Out

blower housing

Bottom View

.

Side View

Custom Front Panel Dimensions

29 7/8” or 35 7/8”

Charcoal Filters # FILTER1

For recirculating installations, high
quality, heavy duty filters ensure the
removal of smoke and odors from the
kitchen. Some ductwork is required to
exhaust the unit out of the cabinet.

1 15/32”

3/4”

ACCESSORIES

CFM Reducer Kit

For use in make up air environments where
an under 300 cfm hood is required. This kit

reduces the ducting to 5” round and reduces

the cfm to under 300

# CFMRED

WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood.

Rev. 11/12