FABER CRIS24SS User Manual

Cristal 24 SS - Slide Out Hood

powerful, practical, efficient

For a streamlined look in the kitchen, the Cristal 24 is your integrated solution. The Cristal 24 has a
Stainless Steel pull-out visor which slides in, flush with your cabinets, tucking the hood away. For total
integration, the front strip can be replaced with wood to match your cabinets, hiding the hood completely.

Model # Size | Color Performance Range Sound Levels

CRIS24SS

24 SS

100 - 300 CFM 2.0 - 4.0 sones

Feature Chart

Cabinet Cut Out 19 3/4” (W) x 10 3/8” (D)

Convertible to Recirculating Yes - charcoal kit needed, need air return

back into the kitchen out of the cabinet

Controls 3 Speed Slider

Lighting 2 X 20 (W) Halogen

Ducting Top 6” Round

Ducting Direct Rear Vent N / A

Grease Filters dishwasher safe mesh

Auto On / Off Yes - fan / lights turn on when pulled out

Integrate front panel Yes - Use your own custom wood front

Built In Mounting Hardware Yes - EasySnap Mounting Clips

AC Input 120 V - 60 hz

AC Power Max 308 W at 2.8 A

Green Energy Saver Mode Yes

Annual Electricty Costs $2.35 / Year *

* Note – ran 30 minutes a day on low speed with the lights on, 365 days, using the North American average of 12.2 cents per kWh.

p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com

Cut Out

Dimensional Diagrams

(see installation instructions for more information)

Product
Dimensions

10 3/8”

Note -

When replacing the front stainless steel panel with your own custom panel, the

dimensions are: 23 9/16" wide x 1 15/32" high x 13/16" deep

ACCESSORIES

Charcoal Filters # FILTER1

For recirculating installations, high
quality, heavy duty filters ensure the
removal of smoke and odors from the
kitchen. Some ductwork is required to
exhaust the unit out of the cabinet.

WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood.

Rev. 06/14