ETC ColorSource Spot, CSSPOTDB45S-1 Data Sheet

ETC

®

ColorSource™ Spot

ColorSource Series

GENERAL INFORMATION

The ETC ColorSource Spot brings together the affordability of a
four-color light engine with the build-quality and support of an
ETC product. Using a unique mix of red, green, blue and lime LED
emitters, the ColorSource spot allows for an amazing range of color
and depth, unlike other low-cost LED fixtures. Because it utilizes
standard ETC optics, adapters and accessories, it is a versatile solution
for any lighting need.

APPLICATIONS

• Houses of worship

• Universities and schools

• Hospitality

• Retail

• Exhibition centers

• Meeting rooms

• Clubs

• Cafetoriums

PRODUCT FEATURES

• ETC’s new RGB-L array (Red, Green, Blue and Lime)

- Also available in Deep Blue that replaces the blue LEDs with
indigo for rich, saturated blues and magentas

• Simple user interface with seven-segment display

• PowerCon in and thru

• DMX/RDM in and thru (5-pin XLR or RJ45)

• LED droop compensation

• Optically calibrated

• Tour-ready, aluminum housing

ORDERING INFORMATION

ColorSource Spot Light Engine with Shutter Barrel

(For use with fixed-field lens tubes only)

MODEL DESCRIPTION

CSSPOTS ColorSource Spot with shutter barrel, black

CSSPOT45S ColorSource Spot RJ45 with shutter barrel,

black

CSSPOTSDB ColorSource Spot Deep Blue with shutter barrel,

black

CSSPOTDB45S ColorSource Spot Deep Blue RJ45 with shutter

barrel, black

ColorSource Spot Light Engine Body

(For use with zoom lens tubes and adapters and for retrofit of existing
fixtures)

MODEL DESCRIPTION

CSSPOT ColorSource Spot, body only, black

CSSPOT45 ColorSource Spot RJ45, body only, black

CSSPOTDB ColorSource Spot Deep Blue, body only, black

CSSPOTDB45 ColorSource Spot Deep Blue RJ45, body only,

black

Color options: -1 = white, -5 = silver gray/custom colors
Fixture ships with a soft-focus diffuser in a gobo holder and a 1.5m PowerCON
power-input cable with a connector of choice. See page 2 for connector options.

™

Please note: Lens tubes to be ordered separately.

1 of 5

ETC

®

ColorSource™ Spot

ColorSource Series

SPECIFICATIONS

GENERAL

• ETL Listed to UL1573: the standard for stage and studio
lighting units

• IP20-rated for indoor use

• Power and DMX in/thru connections for easy setup

• Simple seven-segment, three-button interface with easy access
to 12 customizable presets and five sequences

PHYSICAL

• Rugged, die-cast, all-metal housing

• Available in black (standard), white, silver or custom colors
(contact factory)

• C-clamp included

• Positive-locking double-clutch fixture body

• Slot for glass or stainless steel patterns and soft-focus diffuser

• Wide accessory slot with sliding cover for motorized pattern
devices or optional iris

• Hanging yoke standard. Optional yoke/floor-stand available

ELECTRICAL

• 100VAC to 240VAC 50/60Hz universal power input

• PowerCon power in and thru connections

• Up to nine ColorSource Spot fixtures (15A max) may be linked
via power thru connector (10 ColorSource Spot luminaires
total per circuit) when used with R20 Relay Module or Unison

™

Echo

Relay Panel

- Consult breaker-trip curves when used with other
equipment. Requires power from a non-dim source

• Inrush

- 120V: 28A (First half-cycle)

- 240V: 46A (First half-cycle)

LED*

• 54,000-hour LED life (54,000 hours to 70% intensity)

• 60 Luxeon

*See additional LED notes on page three

COLOR

• Exclusive RGB-L color array

• Available with a Deep Blue array that replaces blue with indigo

• Brightness and color range unlike any other four-color system.

• Optical calibration for consistency from fixture to fixture

• Droop compensation for consistent output and color accuracy

OPTICAL

• Use the included soft-focus diffuser for creating washes or
soft light

• Best performance using ETC’s EDLT lens tubes

• Can use all ETC Source Four
10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° field angles, as well
as 19°, 26°, 36°, and 50° EDLT lenses

• For better performance, use the LED 50° barrel

• Can be used with Source Four LED CYC and Fresnel adapters

CONTROL

• Available with DMX512 in and thru via five-pin XLR or RJ45
connectors (Termination Required)

• Simple RGB control (IRGBS profile)

• See DMX Control Table for additional information

• 15-bit virtual dimming engine provides smooth, high-quality
theatrical fades and minimizes color shift during dimming

• RDM functionality for address and setting change

• Local control of presets (12) and sequences (5)

®

Rebel LED emitters

®

interchangeable lens barrels: 5°,

SPECIFICATIONS

THERMAL

• Ambient operating temperature of 32° to 104°F (0° to 40°C)

• Active electronic thermal management for
droop-free operation

• Quiet fan cooling

• Fixture is designed for continuous operation up to 104°F
(40°C) ambient temperature and requires free flow of air
around fixture housing

ADDITIONAL ORDERING INFORMATION

Power Input Cables

Use information below to order 5’ power input leads with factory-fitted connectors

MODEL DESCRIPTION

DPA-A

DPA-B

DPA-C 5ft PowerCon to grounded 20A twistlock connector

DPA-X 5ft PowerCon to bare-end power input lead

5ft PowerCon to parallel blade U-ground
(Edison) connector

5ft PowerCon to 20A two-pin and ground
(stage pin) connector

Power Thru Jumpers

Note: Power thru jumpers connect to fixture’s output (thru) connector to provide link
to successive fixtures

MODEL DESCRIPTION

DPJ-5 5ft PowerCon-to-PowerCon

DPJ-10 10ft PowerCon-to-PowerCon

fixture-to-fixture jumper

fixture-to-fixture jumper

Diffusers

MODEL DESCRIPTION

S4LED-SFD Source Four LED - Soft Focus Diffuser (included)

S4LED-SWD6

S4LED-SWD7

S4LED-SWD12

S4LED-SWD14

Source Four LED - Smooth Wash Diffuser for

6.25in gel frame slots

Source Four LED - Smooth Wash Diffuser for

7.5in gel frame slots

Source Four LED - Smooth Wash Diffuser for 10°
lens tubes

Source Four LED - Smooth Wash Diffuser for 5°
lens tubes

The Soft Focus Diffuser fits into a standard A-size pattern holder and delivers
beautiful, homogenized light when not in sharp focus. Also, use with patterns for
dappled and soft-edge projections.

The Smooth Wash Diffuser is used when extra-smooth blending of multiple
ColorSource Spot luminaires is required. The smooth wash diffuser is placed into the
gel-frame slot of the lens tube.

RJ45 to XLR Adapter Cables

MODEL DESCRIPTION

W6538 RJ45 to female five-pin XLR adapter (6ft)

W6539 RJ45 to male five-pin XLR adapter (6ft)

2 of 5