ETC CSR-D Data Sheet
®
ColorSource RelayETC
ColorSource® Series
GENERAL INFORMATION
The ColorSource Relay combines power sequencing and data
distribution in a portable plug-and-play format. The ColorSource
Relay comes in wireless- and wired-DMX input. By default, upon
receiving data from the console its internal sequencing routine
automates the process of staggering turn-on times across relays
while it provides hardline DMX to connected fixtures.
APPLICATIONS
• Applications requiring distributed dimming and
position flexibility:
- Schools
- Houses of worship
- Small theaters
- Event lighting
- Automated lighting systems
- Industrial productions
- Rentals
- Conference and exhibition centers
- Multi-use venues such as schools and meeting rooms
FEATURES
• Input voltage: 90-250V; 47-63Hz
• Portable two-pole air-gap relay
• Auto sequencing: turn-on delay in each relay ensures that no
two relays turn on at the same time across a system
• Data input options (choice per model):
- Wireless- The relay recieves wireless DMX for relay
activation on choice of five wireless IDs selected
by thumbwheel and transmits DMX output on
hardline connection while relaying RDM feedback
over wireless and hardline
- DMX (hardwire)- Recieves hardwire DMX (input) for relay
activation with RDM feedback and configuration
while passing through DMX/RDM on
the five-pin XLR (output) connector
• USB master: Connect USB drive for software upgrades
• Integral Safety Connection
• Three mounting options: ETC LED yoke (included), universal
yoke, or for use on desktop wall-mount
ORDERING INFORMATION
ColorSource Relay
MODEL DESCRIPTION
CSR-D ColorSource Relay DMX
CSR-W ColorSource Relay Wireless Receiver
CSR-T ColorSource Relay Transmitter
Accesories
MODEL DESCRIPTION
CSR-D ColorSource Relay DMX
CSR-W ColorSource Relay Wireless (Receiver)
CSR-T ColorSource Relay Transmitter
1 of 4
®
ColorSource RelayETC
ColorSource® Series
SPECIFICATIONS
GENERAL
• CE Compliant; FCC approved
• RoHS compliant
• DMX512A and RDM compatible
• Wireless DMX broadcasts on 2.4GHz range using Spread
Spectrum Frequency Hopping (SSFH )
MECHANICAL
• Case manufactured of molded black textured plastic
• Multiple yoke-fixing hole combinations for flexible mounting
to the fixture
• Convection-cooled; operates without cooling fans
• Available in three colors: black, white or silver
• Molded safety connection point
• Power-input and -output connectors arranged at 45-degree
angle to the pipe for ease of tie-off
• Wireless model includes thumbwheel for selection of six
wireless IDs or custom
• Wireless model includes 2dBA gain omnidirectional antennae
• Specialized directional and high-gain antennaes are sold
separately
ENVIRONMENTAL
• Operating temperatures: 0-40°C; 32-104°F;
• Humidity: 5-95%, non-condensing
• Rated for Indoor use
ELECTRICAL
• Input power:
- Max breaker sizing: 20A
- Voltage ranges: 85-250V
- Frequency range: 47-63Hz
• PowerCon compatible input and output connectors
• Relay cuts both poles for support of two pole 208V and Delta
applications
• 2500V isolation between control and power components
• Wired DMX* In and Thru on five-pin XLR
• DMX thru is not self-terminating
*
Represents 1/4 unit device load for purpose of calculating DMX daisy-chain device count (max
32 unit devices per DMX chain)
RELAY SPECIFICATIONS
• Switching current: 16A max at 40°C ambient
• Mechanical Endurance: 1,000,000 cycles
• Quiessent load: less than .65 Watts during sleep mode
• Electrical endurance
- Resistive 100,000 cycles @16A; 250V
- Inductive 100,000 cycles @6A; 277V
- Motor 40,000 cycles @1.5HP; 250VAC
- Ballast 20,000 cycles @1500W; 347V
- Electronic 20,000 cycles @3300W @277V (12A)
WIRELESS DMX SPECIFICATION
• Range: 100 meters
• Max recievers per transmitter: 32
• RDM devices per transmitter: 32 recommended max
• Band: 2.4GHz Frequency Hopping Spread Spectrum
• Latency: 7mS
• Power: up to 72mW ETSI broadcast power
• Third-party compatibility: City Theatrical Show DMX
CONTROL FEATURES
• DMX512A/RDM In and Thru via five-pin XLR connectors
• Supports up to 32 units on one DMX line
• Choice of relay mode:
- Automatic
- DMX level
- System Power Command
SPECIFICATIONS
CONTROL FEATURES
• RDM (Remote Device Management) allows remote
configuration of the following properties of the device, you
can use any RDM controller such as ETC’s Concert or Eos®
software to configure these options.
- Read-only RDM items: RDM Device Count; Type
Description; Product Details list; Manufacturer;
Defaults; Software Version Sensors list and values; Output
Power (Instantaneous Voltage and Current w/min/max
record)
- Editable RDM items: Name; RDM Enable; DMX Address;
Threshold; DMX Loss Time; Max Turn-On Delay; Relay
Personality/Mode;
- Wireless ID; Identify
2 of 4
Loading...