Page 1
ETC
®
ColorSource® CYC
115/120V100V
ColorSource Series
GENERAL INFORMATION
The ColorSource CYC is a dedicated cyclorama fixture designed with
the sole purpose of creating beautiful, smooth washes of light on a
cyclorama or wall. And it delivers! This is the first ETC fixture to use
this innovative five-color mix of red, green, blue, lime, and indigo for
expanded range and color control.
PRODUCT FEATURES
• All LED (RGBI-L)
• Rich, bright light
• Fanless operation
• Stand-alone presets and sequences
• Simple setup and user interface
ORDERING INFORMATION
ColorSource CYC
MODEL DESCRIPTION
CSCYC ColorSource CYC fixture, black
Color Options: Fixture ships standard in black. For additional colors please use the
below color code suffix:
Add -1 for white or -5 for silver
Notes: C-clamp sold separately
COLORSOURCE CYC SHIPS WITH:
• Hanging yoke
• Power cable
1 of 6
Page 2
ETC
®
PRODUCT SPECIFICATIONS
ColorSource CYC
ColorSource Series
Source
LED Details 42 Lumileds LUXEON C LEDs
Max Lumens 4117
Lumens Per Watt 31
L70 Rating (Hours to 70%
output)
50,000 hours (estimate pending testing data)
Color
Colors Used Red, green, blue, indigo and lime
Color temperature range Variable
Calibrated Array Yes
Red Shift No
Optical
Beam angle range N/A (asymmetrical)
Gate size N/A
Aperture size N/A
Pattern projection No
Pattern size N/A
Camera flicker control/Hz
range
Notes The ColorSource CYC has a built in accessory for
1,200 Hz (default) and 25,000 Hz (via RDM)
spill control
Control
Input method DMX-512 via 5-pin XLR or RJ45 connector
Protocols DMX
Modes (Footprint) 5 channel- IRGBS (5)
Direct- IRGBILS (7)
1 channel- I (1)
RGB- RGB (3)
RDM configuration Yes
UI type 7-segment address display
Local control Yes
Onboard presets Yes (12)
Onboard sequences Yes (5)
Onboard effects No
Fixture to fixture control Yes
Notes Local level control via UI
Electrical
Voltage range 100V-240VAC, 50/60Hz
Input method powerCON in and thru
Inrush 39A (first half-cycle) at 120V
Fixtures per circuit 9 (20A switched circuit, R20 module or similar)
Wattage (Typical/Standby) 133W/1.4W
Current draw 1.11A at 120V
Thermal
Ambient operating temp 0-40° C (32-104° F)
Fan (controllable) No (N/A)
Droop compensation Yes
dB range 18.5dBa average at 1m
BTUs/hour 418
Physical
Materials Die-cast aluminum and plastic
Color options Black, white, silver or custom color
Mounting options Yoke and floor
IP rating IP-20
Weight 10.3 lbs (4.67 kg)
Included accessories Hanging yoke, power cable
Notes See accessories list for power cable options
2 of 6
Page 3
ETC
SPD (normalized to Y=100)
(nm)
SPD (normalized to Y=100)
®
PRODUCT FEATURES
ColorSource CYC
ColorSource Series
UNIQUE 5-COLOR ARRAY
ColorSource CYC uses a unique blend of
red, green, blue, indigo and lime LEDs
COMPACT DESIGN
The ColorSource CYC was designed to fit
onto even the tightest of stages
COLOR METRIC INFORMATION
TM-30-15 3200K - COLORSOURCE CYC
78
R
f
D
uv
0.0016
TM-30-15 5600K - COLORSOURCE CYC
116
R
g
CCT
3174
FAN-FREE
No fan means a quieter stage
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
380 430 480 530 580 630 680 730 780
Test source Reference source
λ
76
R
f
D
uv
-0.0008
104
R
g
CCT
5524
3 of 6
3
2.5
2
1.5
1
0.5
0
380 430 480 530 580 630 680 730 780
Test source Reference source
λ (nm)
Page 4
ETC
®
COLOR METRIC INFORMATION
Additional Color Metrics
CS CYC 3200K CS CYC 5600K
CRI Ra (R9) 72 (2) 72 (-42)
TLCI 52 68
PHOTOMETRICS
Numerical values represent footcandles.
ColorSource CYC
ColorSource Series
FEET
FEET
4 of 6
FOOTCANDLES FOOTCANDLES FOOTCANDLES
FEET
Page 5
ETC
®
ColorSource CYC
ColorSource Series
ADDITIONAL ORDERING INFORMATION
Accessories
MODEL DESCRIPTION
400SC Safety Cable
400CC C-Clamp
DPA-A 5’ powerCon to parallel blade U-ground (Edison) connector
DPA-B 5’ powerCon to 20A two-pin and ground (stage-pin) connector
DPA-C 5’ powerCon to grounded 20A twistlock connector
DPA-X 5’ powerCon to bare-end power input lead
DPJ-5 5’ powerCon to powerCon fixture to fixture jumper
DPJ-10 10’ powerCon to powerCon fixture to fixture jumper
NOTES ABOUT LED LUMINAIRES
All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. Thermal
conditions can be affected by ambient temperatures and orientation. Based on the LED manufacturer’s B50 L70 specification, a ColorSource
CYC luminaire will achieve ~70% of its initial output after an estimated 50,000 hours of typical usage*. In individual situations, LEDs will
be used for different durations and at different levels. This can eventually lead to minor alterations in color performance, necessitating slight
adjustments to presets, cues or programs.
*Note: Life tests are currently underway. Results are pending.
5 of 6
Page 6
ETC
®
PHYSICAL
ColorSource CYC Dimensions
MODEL HEIGHT WIDTH DEPTH
inches mm inches mm inches mm
ColorSource CYC (Floor) 7.83 199 9.86 250 8.70 221
ColorSource CYC (Hang) 11.97 304 9.86 250 8.70 221
ColorSource CYC Weights
MODEL WEIGHT* SHIPPING WEIGHT
lbs kgs lbs kgs
ColorSource CYC 10.3 4.67 12.9 5.85
*Without mounting hardware
FLOOR
ColorSource CYC
ColorSource Series
HANG
Corporate Headquarters n 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA n +1 608 831 4116
London, UK n Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK n +44 (0) 20 8896 1000
Rome, IT n Via Pieve Torina, 48, 00156 Rome, Italy n +39 (06) 32 111 683
Holzkirchen, DE n Ohmstrasse 3, 83607 Holzkirchen, Germany n +49 (80 24) 47 00-0
Hong Kong n Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong n +852 2799 1220
Web n etcconnect.com n Copyright©2018 ETC. All Rights Reserved. All product information and specifications subject to change. 7415L1001 Rev B 02/18
6 of 6
Loading...