ETC Congo Kid Quick Guide

Setup Guide

Hard Power Switch
(I is on, O if off)

®

Fan

IEC Power Cable
(1 ships with Congo
Kid) plugs into the
IEC Receptacle.

Soft Power / Reset
Switch

2 USB Ports

Vents

Cat 5 Ethernet Cable
plugs into the Ethernet
port for connecting
Congo Kid to a lighting
network or RFR.

Audio Out

Ethernet
1 & 2

(Audio In
Reserved
for Future
Implementation)

2 MIDI Ports
(One In and
One Out)

Make sure to keep the fan and vents clear of any obstructions.

For information about MIDI and Remote Trigger,
please see the current Cobalt Family User Manual.

Remote Trigger

Congo Kid supports up to 2 monitors using the following

combinations:

Signal
Type

Physical
Port

Display Port

DVI-I Port

DVI-D Port

Multitouch monitors need to be Windows 7 or 8 Compatible.

Display Port

Yes

No No

Corporate Headquarters
London, UK
Rome, IT
Holzkirchen, DE
Hong Kong
Service:
Web:

4340M2200 RevB 2014-04

Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel [phone] Fax [phone]

Via Pieve Torina, 48, 001569 Rome, Italy Tel [phone] Fax [phone]

Ohmstrasse 3, 83607 Holzkirchen, Germany Tel [phone] Fax [phone]

Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel [phone] Fax [phone]

(Americas) [e-mail] (UK) [e-mail] (DE) [e-mail] (Asia) [e-mail]

www.etcconnect.com

DVIVGA

Yes
with Adapter

YesNo

Yes

3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel [phone] Fax [phone]

Copyright © 2011 ETC. All Rights Reserved. Product information and specifications subject to change.

ETC intends this document to be provided in its entirety.

Yes
with Active
Adapter

Yes
with Adapter

IEC Receptacle

eSATA
Port

Display

2 USB Ports

Port

DVI-I Port

USB ports are used to
connect a keyboard,
mouse, and/or USB
flash drives. One addi­tional port is located on
Congo Kid’s face panel.

Page 1

2 USB Ports

DVI-D Port

2 DMX Ports

Phone Remote

5 pin XLR DMX Cables plug into the
DMX ports to connect Congo Kid with
dimmers, scrollers, moving lights, and
other devices.

The phone remote jack is for
plugging in a cordless phone
for remote control of Congo
Kid. Please see the Cobalt
Family User Manual for more
information.