ColorSource Spot Pearl is a variable white-light LED array that utilizes
a mix of two different white LEDs that enable a user to set the color
temperature anywhere between 2700 K and 6500 K.
The Pearl array includes the same great feature set and high quality
construction as their full color siblings including an impressively
bright output and simple user interface.
Designed for installations that depend heavily on white light such as
studios, houses of worship, and architectural installations, this array
features flicker-free operation and an impressively smooth dimming
curve.
APPLICATIONS
• Houses of worship
• Universities and schools
• Studios
• Hospitality
• Retail
• Exhibition centers
• Meeting rooms
• Clubs
PRODUCT FEATURES
• Variable white light using 2700 K and 6500 K LEDs
• Simple user interface with seven-segment display
• powerCON in and thru
• DMX/RDM in and thru (5-pin XLR or RJ45)
• Optically calibrated
• Tour-ready, aluminum housing
ColorSource Series
ORDERING INFORMATION
ColorSource Spot Pearl Light Engine with Shutter
Barrel
(For use with fixed-field lens tubes only)
MODELDESCRIPTION
CSSPOTPRLSColorSource Spot Pearl with shutter barrel,
black
CSSPOTPRL45SColorSource Spot Pearl RJ45 with shutter barrel,
black
ColorSource Spot Pearl Light Engine Body
(For use with zoom lens tubes and adapters and for retrofit of existing
fixtures)
MODELDESCRIPTION
CSSPOTPRLColorSource Spot Pearl, body only, black
CSSPOTPRL45ColorSource Spot Pearl RJ45, body only, black
Color options: -1 = white, -5 = silver gray/custom colors
Fixture ships with a soft-focus diffuser in a gobo holder and a 1.5m powerCON
power-input cable with a connector of choice. See page 7 for connector options.
Please note: Lens tubes to be ordered separately.
™
1 of 7
ETC
®
PRODUCT SPECIFICATIONS
ColorSource® Spot Pearl
ColorSource Series
Source
LED details60 Lumileds LUXEON® C LEDs
Max lumens9,235
Lumens per watt46
L70 rating (hours to 70%
output)
36,000 hours (estimate pending testing data)
Color
Colors usedWarm white, cool white
Color temperature range2700 K - 6500 K
Calibrated arrayYes
Red shift No
Optical
Beam angle rangeSwappable lens tubes between 5-90 degrees
Gate size79.24mm
Aperture size6.25”-14” (depending on lens tube)
Pattern projectionYes
Pattern sizeA or B
Camera flicker control/Hz
range
1,200Hz (default) and 25,000Hz (via RDM)
Control
Input methodDMX-512 via 5-pin XLR or RJ45 connector
ProtocolsDMX, RDM
Modes (footprint)Variable color temperature: ICt (2)
Direct: IWCS (4)
1 channel: I (1)
RDM configurationYes
UI type7-segment address display
Local controlYes
Onboard presetsYes (12)
Onboard sequencesNo
Onboard effectsNo
Fixture to fixture controlYes
NotesLocal level control via UI
Electrical
Voltage range100V - 240VAC, 50/60Hz
Input methodpowerCON in and thru
Inrush28A (first half-cycle) at 120V
Fixtures per circuit7 (20A switched circuit, R20 module or similar)
Wattage (typical/standby)199W / 1.87W at 120V
Current draw1.67A at 120V
Thermal
Ambient operating temp0-40° C (32-104° F)
Fan (controllable)No (N/A)
Droop compensationYes
dB range21.2dBa average at 1m
BTUs/hour679
Physical
MaterialsDie-cast aluminum and plastic
Color optionsBlack, white, silver or custom color
Mounting optionsYoke and floor
IP ratingIP-20
Weight17lb (7.7kg) with barrel
Included accessoriesHanging yoke, 1.5m power cable, soft-focus
diffuser in gobo holder, gel frame
NotesSee accessories list for power cable options
Warranty
Full Fixture5 years
LED Array10 years
2 of 7
ETC
-11%
-9%
-2%
4%
7%
7%
0%
-4%
-7%
-7%
-2%
7%
7%
9%
1%
-5%
Local Chroma Shift (
IES TM-30-15 Color Rendition Report
Radiant Power
(Equal Luminous Flux)
®
PRODUCT FEATURES
ColorSource® Spot Pearl
ColorSource Series
VERSITILE
ColorSource Spot Pearl can also be used
with the Fresnel and CYC adapters to use
throughout your venue
WARM TO COOL
Bright white light from 2700 K to 6500 K
COLOR METRIC INFORMATION
TM-30-15 3200K - COLORSOURCE SPOT PEARL
80
R
8
9
f
7
6
45
3
GREAT FOR STUDIOS
With refresh rates up to 25,000Hz, there is
no need to worry about flicker on camera
40%
99
R
2
1
16
)
30%
g
cs,hj
R
-10%
-20%
-30%
-40%
20%
10%
0%
ReferenceTest
10
CCT
3206 K
11
1213
Colors are for visual orientation purposes only. Please contact ETC for full TM-30-15 report.
14
-0.0045
15
D
uv
380430480530580630680730780
Wavelength (nm)
3 of 7
ETC
-13%
-9%
-4%
2%
5%
4%
-2%
-8%
-12%
-8%
0%
5%
11%
7%
8%
-5%
Local Chroma Shift (
IES TM-30-15 Color Rendition Report
Radiant Power
(Equal Luminous Flux)
®
COLOR METRIC INFORMATION
ColorSource® Spot Pearl
ColorSource Series
77
R
f
7
8
9
10
CCT
5852 K
Additional Color Metrics
CRI Ra (R9)82 (14)82 (15)
TLCI6662
6
11
CS SPOT
3200K
1213
Colors are for visual orientation purposes only. Please contact ETC for full TM-30-15 report.
CS SPOT
5600K
45
3
14
2
15
97
R
16
D
g
1
uv
-0.0048
40%
)
30%
cs,hj
R
20%
10%
0%
-10%
-20%
-30%
-40%
ReferenceTest
380430480530580630680730780
Wavelength (nm)
PHOTOMETRY
See ColorSource Spot Photometry Guide available at www.etcconnect.com
4 of 7
ETC
®
ColorSource® Spot Pearl
ColorSource Series
ADDITIONAL ORDERING INFORMATION
Power Input Cables
Use information below to order 5’ power input leads with factory-fitted connectors
MODELDESCRIPTION
DPA-A5ft powerCON to parallel blade U-ground (Edison) connector
DPA-B5ft powerCON to 20A two-pin and ground (stage pin) connector
DPA-C5ft powerCON to grounded 20A twistlock connector
DPA-X5ft powerCON to bare-end power input lead
Power Thru Jumpers
Note: Power thru jumpers connect to fixture’s output (thru) connector to provide link to successive fixtures
MODELDESCRIPTION
DPJ-55ft powerCON-to-powerCON
DPJ-1010ft powerCON-to-powerCON
Diffusers
MODELDESCRIPTION
S4LED-SFDSource Four LED - Soft Focus Diffuser (included)
S4LED-SWD6Source Four LED - Smooth Wash Diffuser for 6.25in gel frame slots
S4LED-SWD7Source Four LED - Smooth Wash Diffuser for 7.5in gel frame slots
S4LED-SWD12Source Four LED - Smooth Wash Diffuser for 10° lens tubes
S4LED-SWD14
Source Four LED - Smooth Wash Diffuser for 5° lens tubes
The Soft Focus Diffuser fits into a standard A-size pattern holder and delivers beautiful, homogenized light when not in sharp focus. Also, use with patterns for dappled and
soft-edge projections.
The Smooth Wash Diffuser is used when extra-smooth blending of multiple ColorSource Spot Pearl luminaires is required. The smooth wash diffuser is placed into the gelframe slot of the lens tube.
RJ45 to XLR Adapter Cables
MODELDESCRIPTION
W6538RJ45 to female five-pin XLR adapter (6ft)
W6539RJ45 to male five-pin XLR adapter (6ft)
fixture-to-fixture jumper
fixture-to-fixture jumper
CONTROL
DMX Input Channel Profiles
DMX Channelct
(Variable color
temperature)
1IntensityIntensityIntensity
2Color temperatureWarm white
3Cool white
4Strobe*
*Use DMX values of 0 or 255 for no strobe. Use values of 1-254 to increase the strobe rate from 1 per second up to 33 per second.
dir
(Direct)
1ch
(One channel)
5 of 7
ETC
®
ColorSource® Spot Pearl
ColorSource Series
PREFERRED LENSING OPTIONS
(Lenses sold separately)
Fixed Beam Lenses
MODELDESCRIPTION
LED50LTLED-specific 50° EDLT with lenses installed
LED50LT-1LED-specific 50° EDLT (white) with lenses installed
436EDLT36° EDLT w/lens installed
436EDLT-1 36° EDLT (white) w/lens installed
426EDLT26° EDLT w/lens installed
426EDLT-126° EDLT (white) w/lens installed
419EDLT19° EDLT w/lens installed
419EDLT-119° EDLT (white) w/lens installed
490LT90° w/lens installed
490LT-190° (white) w/lens installed
470LT70° w/lens installed
470LT-170° (white) w/lens installed
414LT14° w/lens installed
414LT-114° (white) w/lens installed
410LT10° w/lens installed
410LT-110° (white) w/lens installed
405LT5° w/lens installed
405LT-15° (white) w/lens installed
Zoom Lens Assemblies
Use with light-engine body models.
MODELDESCRIPTION
41530LTSource Four 15-30° Zoom lens assembly
42550LTSource Four 25-50° Zoom lens assembly
ADDITIONAL ORDERING INFORMATION
FixtureAccessories
MODELDESCRIPTION
400CCC-Clamp (included)
400SCSafety Cable
400PH-APattern holder (A size)
400PH-BPattern holder (B size)
400PH-GGlass pattern holder
400RSDrop-In Iris
400CFColor frame (6.25”)
407CF7.5in square color frame
400DNDonut
400THTop Hat
400HHHalf Hat
DPSJ-X25ft powerCON to Edison
inline switch
input power cable with
NOTES ABOUT LED LUMINAIRES
All LED sources experience some lessening of light output and
some color shift over time. LED output will vary with thermal
conditions. Based on the LED manufacturer’s B50 L70 specification,
a ColorSource Spot Pearl luminaire will achieve ~70% of its initial
output after 36,000 hours of typical usage. In individual situations,
LEDs will be used for different durations and at different levels.
This can eventually lead to minor alterations in color performance,
necessitating slight adjustments to presets, cues or programs.