ETC ColorSource Spot, CSSPOTDB45S-1 Data Sheet

ETC

®

ColorSource™ Spot

ColorSource Series

GENERAL INFORMATION

The ETC ColorSource Spot brings together the affordability of a
four-color light engine with the build-quality and support of an
ETC product. Using a unique mix of red, green, blue and lime LED
emitters, the ColorSource spot allows for an amazing range of color
and depth, unlike other low-cost LED fixtures. Because it utilizes
standard ETC optics, adapters and accessories, it is a versatile solution
for any lighting need.

APPLICATIONS

• Houses of worship

• Universities and schools

• Hospitality

• Retail

• Exhibition centers

• Meeting rooms

• Clubs

• Cafetoriums

PRODUCT FEATURES

• ETC’s new RGB-L array (Red, Green, Blue and Lime)

- Also available in Deep Blue that replaces the blue LEDs with
indigo for rich, saturated blues and magentas

• Simple user interface with seven-segment display

• PowerCon in and thru

• DMX/RDM in and thru (5-pin XLR or RJ45)

• LED droop compensation

• Optically calibrated

• Tour-ready, aluminum housing

ORDERING INFORMATION

ColorSource Spot Light Engine with Shutter Barrel

(For use with fixed-field lens tubes only)

MODEL DESCRIPTION

CSSPOTS ColorSource Spot with shutter barrel, black

CSSPOT45S ColorSource Spot RJ45 with shutter barrel,

black

CSSPOTSDB ColorSource Spot Deep Blue with shutter barrel,

black

CSSPOTDB45S ColorSource Spot Deep Blue RJ45 with shutter

barrel, black

ColorSource Spot Light Engine Body

(For use with zoom lens tubes and adapters and for retrofit of existing
fixtures)

MODEL DESCRIPTION

CSSPOT ColorSource Spot, body only, black

CSSPOT45 ColorSource Spot RJ45, body only, black

CSSPOTDB ColorSource Spot Deep Blue, body only, black

CSSPOTDB45 ColorSource Spot Deep Blue RJ45, body only,

black

Color options: -1 = white, -5 = silver gray/custom colors
Fixture ships with a soft-focus diffuser in a gobo holder and a 1.5m PowerCON
power-input cable with a connector of choice. See page 2 for connector options.

™

Please note: Lens tubes to be ordered separately.

1 of 5

ETC

®

ColorSource™ Spot

ColorSource Series

SPECIFICATIONS

GENERAL

• ETL Listed to UL1573: the standard for stage and studio
lighting units

• IP20-rated for indoor use

• Power and DMX in/thru connections for easy setup

• Simple seven-segment, three-button interface with easy access
to 12 customizable presets and five sequences

PHYSICAL

• Rugged, die-cast, all-metal housing

• Available in black (standard), white, silver or custom colors
(contact factory)

• C-clamp included

• Positive-locking double-clutch fixture body

• Slot for glass or stainless steel patterns and soft-focus diffuser

• Wide accessory slot with sliding cover for motorized pattern
devices or optional iris

• Hanging yoke standard. Optional yoke/floor-stand available

ELECTRICAL

• 100VAC to 240VAC 50/60Hz universal power input

• PowerCon power in and thru connections

• Up to nine ColorSource Spot fixtures (15A max) may be linked
via power thru connector (10 ColorSource Spot luminaires
total per circuit) when used with R20 Relay Module or Unison

™

Echo

Relay Panel

- Consult breaker-trip curves when used with other
equipment. Requires power from a non-dim source

• Inrush

- 120V: 28A (First half-cycle)

- 240V: 46A (First half-cycle)

LED*

• 54,000-hour LED life (54,000 hours to 70% intensity)

• 60 Luxeon

*See additional LED notes on page three

COLOR

• Exclusive RGB-L color array

• Available with a Deep Blue array that replaces blue with indigo

• Brightness and color range unlike any other four-color system.

• Optical calibration for consistency from fixture to fixture

• Droop compensation for consistent output and color accuracy

OPTICAL

• Use the included soft-focus diffuser for creating washes or
soft light

• Best performance using ETC’s EDLT lens tubes

• Can use all ETC Source Four
10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° field angles, as well
as 19°, 26°, 36°, and 50° EDLT lenses

• For better performance, use the LED 50° barrel

• Can be used with Source Four LED CYC and Fresnel adapters

CONTROL

• Available with DMX512 in and thru via five-pin XLR or RJ45
connectors (Termination Required)

• Simple RGB control (IRGBS profile)

• See DMX Control Table for additional information

• 15-bit virtual dimming engine provides smooth, high-quality
theatrical fades and minimizes color shift during dimming

• RDM functionality for address and setting change

• Local control of presets (12) and sequences (5)

®

Rebel LED emitters

®

interchangeable lens barrels: 5°,

SPECIFICATIONS

THERMAL

• Ambient operating temperature of 32° to 104°F (0° to 40°C)

• Active electronic thermal management for
droop-free operation

• Quiet fan cooling

• Fixture is designed for continuous operation up to 104°F
(40°C) ambient temperature and requires free flow of air
around fixture housing

ADDITIONAL ORDERING INFORMATION

Power Input Cables

Use information below to order 5’ power input leads with factory-fitted connectors

MODEL DESCRIPTION

DPA-A

DPA-B

DPA-C 5ft PowerCon to grounded 20A twistlock connector

DPA-X 5ft PowerCon to bare-end power input lead

5ft PowerCon to parallel blade U-ground
(Edison) connector

5ft PowerCon to 20A two-pin and ground
(stage pin) connector

Power Thru Jumpers

Note: Power thru jumpers connect to fixture’s output (thru) connector to provide link
to successive fixtures

MODEL DESCRIPTION

DPJ-5 5ft PowerCon-to-PowerCon

DPJ-10 10ft PowerCon-to-PowerCon

fixture-to-fixture jumper

fixture-to-fixture jumper

Diffusers

MODEL DESCRIPTION

S4LED-SFD Source Four LED - Soft Focus Diffuser (included)

S4LED-SWD6

S4LED-SWD7

S4LED-SWD12

S4LED-SWD14

Source Four LED - Smooth Wash Diffuser for

6.25in gel frame slots

Source Four LED - Smooth Wash Diffuser for

7.5in gel frame slots

Source Four LED - Smooth Wash Diffuser for 10°
lens tubes

Source Four LED - Smooth Wash Diffuser for 5°
lens tubes

The Soft Focus Diffuser fits into a standard A-size pattern holder and delivers
beautiful, homogenized light when not in sharp focus. Also, use with patterns for
dappled and soft-edge projections.

The Smooth Wash Diffuser is used when extra-smooth blending of multiple
ColorSource Spot luminaires is required. The smooth wash diffuser is placed into the
gel-frame slot of the lens tube.

RJ45 to XLR Adapter Cables

MODEL DESCRIPTION

W6538 RJ45 to female five-pin XLR adapter (6ft)

W6539 RJ45 to male five-pin XLR adapter (6ft)

2 of 5

ETC

®

ColorSource™ Spot

ColorSource Series

PREFERRED LENSING OPTIONS

(Lenses sold separately)

Fixed Beam Lenses

MODEL DESCRIPTION

LED50LT LED-specific 50° EDLT with lenses installed

LED50LT-1 LED-specific 50° EDLT (white) with lenses installed

436EDLT 36° EDLT w/lens installed

436EDLT-1 36° EDLT (white) w/lens installed

426EDLT 26° EDLT w/lens installed

426EDLT-1 26° EDLT (white) w/lens installed

419EDLT 19° EDLT w/lens installed

419EDLT-1 19° EDLT (white) w/lens installed

490LT 90° w/lens installed

490LT-1 90° (white) w/lens installed

470LT 70° w/lens installed

470LT-1 70° (white) w/lens installed

414LT 14° w/lens installed

414LT-1 14° (white) w/lens installed

410LT 10° w/lens installed

410LT-1 10° (white) w/lens installed

405LT 5° w/lens installed

405LT-1 5° (white) w/lens installed

Zoom Lens Assemblies

Use with light-engine body models.

MODEL DESCRIPTION

41530LT Source Four 15-30° Zoom lens assembly

42550LT Source Four 25-50° Zoom lens assembly

ADDITIONAL ORDERING INFORMATION

Fixture Accessories

MODEL DESCRIPTION

400CC C-Clamp (included)

400SC Safety Cable

400PH-A Pattern holder (A size)

400PH-B Pattern holder (B size)

400PH-G Glass pattern holder

400RS Drop-In Iris

400CF Color frame (6.25”)

407CF 7.5in square color frame

400DN Donut

400TH Top Hat

400HH Half Hat

DPSJ-X 25ft PowerCon to Edison

inline switch

input power cable with

NOTES ABOUT LED LUMINAIRES

All LED sources experience some lessening of light output and
some color shift over time. LED output will vary with thermal
conditions. Based on the LED manufacturer’s B50 L70 specification,
a ColorSource Spot luminaire will achieve ~70% of its initial output
after 54,000 hours of typical usage. In individual situations, LEDs
will be used for different durations and at different levels. This
can eventually lead to minor alterations in color performance,
necessitating slight adjustments to presets, cues or programs.

CONTROL

LED Adapters

MODEL DESCRIPTION

S4LEDCYC Source Four LED CYC

S4LEDFRES Source Four LED Fresnel

Power Consumption With RGB at full

MODEL VOLTAGE

(V)

ColorSource Spot 100 1.48 148

120 1.24 147

230 0.65 141

CURRENT

(A)

MAX

POWER (W)

DMX Input Channel Profiles

DMX
Profile

5ch­Default

RGB 3 1-Red

1ch 1 1-INT This mode controls the intensity

Direct 6 1-INT

3 of 5

DMX

Channels

5 1-INT

Channel

Assignments

2-Red
3-Green
4-Blue
5-Strobe

2-Green
3-Blue

2-Red
3-Green
4-Blue/Indigo*
5-Lime
6-Strobe

Notes

of Preset 1

*Original ColorSource Spot
fixture uses blue in channel 4;
Deep Blue ColorSource
Spot fixture uses indigo in
channel 4.

ETC

COLORSOURCE VS COLORSOURCE DEEP BLUE

®

ColorSource™ Spot

ColorSource Series

4 of 5

ETC

7.42”

188mm

8.07”

205mm

9.72”

247mm

23.33”

593mm

7.94”

202mm

13.36”

339mm

20.11”

511mm

23.97”

609mm

26.44”

672mm

12.13”

308mm

16.64”

423mm

maximum

maximum

maximum

minimum

Min. height

14.98”

380mm

10.61”
269mm

®

PHOTOMETRY

See ColorSource Spot Photometry Guide available at www.etcconnect.com

PHYSICAL

ColorSource™ Spot

ColorSource Series

ColorSource Spot Weights

WEIGHT* SHIPPING WEIGHT

lbs kgs lbs kgs

With Barrel 17.0 7.7 22.0 10.0

Without Barrel 13.0 5.9 16.3 7.4

* Does not include mounting hardware or lens tube

ColorSource Spot Dimensions

HEIGHT WIDTH DEPTH

in mm in mm in mm

ColorSource Spot 23.33 593 13.36 339 26.44 672

Corporate Headquarters n 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA n [phone]
London, UK n Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK n [phone]
Rome, IT n Via Pieve Torina, 48, 00156 Rome, Italy n [phone]
Holzkirchen, DE n Ohmstrasse 3, 83607 Holzkirchen, Germany n [phone]
Hong Kong n Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong n [phone]
Web n etcconnect.com n Copyright©2017 ETC. All Rights Reserved. All product information and specifications subject to change. 7413L1001 Rev H 06/17

5 of 5