ETC ColorSource PAR Data Sheet
ETC
®
ColorSource™ PAR
ColorSource Series
GENERAL INFORMATION
The ETC ColorSource PAR offers a quality of build and light that has
never been seen in an affordable wash fixture. Using ETC’s unique
RGB-L color system, the ColorSource PAR provides a rich, bright light
unlike any other LED washlight in its class. And it was design and
manufactured by ETC.
APPLICATIONS
• Houses of worship
• Universities and schools
• Hospitality
• Retail
• Exhibition centers
• Meeting rooms
• Clubs
• Cafetoriums
PRODUCT FEATURES
• ETC’s new RGB-L chipset (Red, Green, Blue and Lime)
• Homogenized optics
• Simple user interface with 7-segment display
• PowerCon in and thru
• DMX/RDM in and thru (5-pin)
• LED droop compensation
• Optically calibrated
• Tour-ready, aluminum housing
ORDERING INFORMATION
ColorSource PAR
MODEL DESCRIPTION
CSPAR ColorSource PAR
Note: ColorSource PAR luminaires ship with a hanging yoke and a power cable with
connector of choice. See page 2 for connector options. C-clamps are not
included. For addtional color options, please add the following: -1 for white,
-5 for silver or -8 for custom color.
1 of 5
ETC
®
ColorSource™ PAR
ColorSource Series
SPECIFICATIONS
GENERAL
• 8 RGB-L chipset color-mixing wash luminaire
• ETL Listed to UL1573, the standard for stage and studio
lighting units
• IP20-rated for indoor use
• Power- and DMX-in/thru connections for easy setup
• Simple 7-segment, three-button interface with easy access to
12 customizable presets and five sequences
PHYSICAL
• Rugged, die-cast, all-metal housing
• Easy-access slots for secondary lenses and standard 7.5”
PAR accessories
• Available in black (standard), white or silver (optional) or
custom colors (contact factory)
• Hanging yoke included
ELECTRICAL
• 100VAC to 240VAC 50/60Hz universal power input
• PowerCon in and thru connections
• Up to nine luminaires (15A max) may be linked via power thru
connector (10 luminaires total per circuit) when used with
R20 relay module or Unison
breaker trip curves when used with other equipment.
Requires power from a non-dimmable source
• Inrush
- 120V: 35A (First half-cycle)
- 240V: 49A (First half-cycle)
LED*
• 20,000-hour LED life (20,000 hours at 70% intensity)
• 40 Luxeon
*See additional LED notes on page 3
COLOR
• Exclusive RGB-L Color array
• Brightness and color range unlike any other 4-color system
• Droop compensation maintains color accuracy during use
• Optically calibrated to ensure consistency across fixture
OPTICAL
• Primary field angle of 24.9° and beam angle of 14.5°
• Secondary lenses available for multiple beam-spread options
• Homoginized optics for a consistent, smooth beam
• Refer to accessories charts for lenses available
CONTROL
• DMX512 in and thru via five-pin XLR (termination required)
• RGB control (See DMX control table for additional
information)
• 15-bit virtual dimming engine provides smooth, high-quality
theatrical fades
• RDM functionality for address and setting changes
• Local control of presets (12) and sequences (5)
THERMAL
• Ambient operating temperature of 32° to 104°F (0° to 40°C)
• Active electronic thermal management for thermal
droop-free operation
• Variable-speed fan
• Fixture is designed for continuous operation up to 104°F
(40°C) ambient temperature and requires free flow of air
around fixture housing
®
Z LED emitters (five per optic)
®
Echo Relay Panel. Consult
ADDITIONAL ORDERING INFORMATION
Power Input Cables
Use information below to order 5’ power input leads with factory-fitted connectors.
MODEL DESCRIPTION
DPA-A 5’ PowerCon to parallel blade U-ground
(Edison) connector
DPA-B 5’ PowerCon to 20A two-pin and ground (stage-pin)
connector
DPA-C 5’ PowerCon to grounded 20A twistlock connector
DPA-X 5’ PowerCon to bare-end power input lead
Power-Thru Jumpers
Note: Power thru jumpers connect to luminaire’s output (thru) connector to provide
link to successive luminaires
MODEL DESCRIPTION
DPJ-5 5’ PowerCon to PowerCon
fixture jumper
DPJ-10 10’ PowerCon to PowerCon
fixture jumper
fixture to
fixture to
Luminaire Accessories
MODEL DESCRIPTION
CSPARFSY Yoke with floor-stand attachment
400BD Barn door (Use only as a flexible top hat to diminish
aperture glare. Not for beam shaping)
407CF Color Frame (use for round and oblong lenses)
400L Egg Crate Louver
400PTH3 Top Hat 3” Tube
400PTH6 Top Hat 6” Tube
400PHH Half Hat 6” Tube
400CC C-Clamp (does not ship with fixture)
400SC Safety Cable (32”)
DPSJ-25 25’ PowerCon to Edison
inline switch
input power cable with
2 of 5
Loading...