ETC ColorSource Linear 1 Datasheet
ETC
®
ColorSource® Linear
ColorSource Series
GENERAL INFORMATION
ColorSource Linear combines the bright, bold output of the
ColorSource family with a sleek linear design to create a versitile and
affordable strip light. Whether being used to create a stunning wash
of light on your stage or to light a wall, the ColorSource Linear uses
ETC’s unique RGB-L color system to provide beautiful LED lighting.
APPLICATIONS
• House of worship
• Universities and schools
• Hospitality
• Retail
• Exhibition centers
• Meeting rooms
• Clubs
• Cafetoriums
PRODUCT FEATURES
• ETC’s RGB-L chipset (Red, Green, Blue and Lime)
- Available in Original or Deep Blue
• Homogenized optics
• Simple user interface with seven-segment display
• PowerCon in and thru power connections
• DMX in and thru (5-pin XLR or RJ45)
• RDM or local configuration
• LED droop compensation for consistent output
• Optically calibrated
• Tour-ready, aluminum housing
ORDERING INFORMATION
ColorSource Linear
MODEL DESCRIPTION
CSLINEAR1 ColorSource Linear
CSLINEAR145 ColorSource Linear RJ45
CSPLINEAR1DB ColorSource Linear Deep Blue
CSLINEAR1DB45 ColorSource Linear Deep Blue RJ45
Color Options: Fixtures ship standard in black. For additional colors please use the
below color code suffix:
-1 for white, -5 for silver or -8 for custom color.
Notes: ColorSource Linear luminaires ship with a pair of trunnions and a power
cable with connector of choice. C-clamps are not included. See Power Input
Cables on page 2 for connector options.
1 of 7
ETC
®
ColorSource® Linear
ColorSource Series
SPECIFICATIONS
GENERAL
• RGB-L chipset color-mixing wash luminaire with eight
emmitters
• IP20-rated for indoor use
• Power- and DMX-in/thru connections for simple setup
• Seven-segment, three-button interface
• 12 onboard, customizable presets and five sequences
PHYSICAL
• Rugged, die-cast, aluminum housing
• Two secondary lens slots
• Available in black, white or silver
- Custom colors available upon request (contact ETC)
• Trunnions included
ELECTRICAL
• 100VAC to 240VAC 50/60Hz universal power input
• PowerCon in and thru power connections
• Up to nine luminaires (15A max) may be linked via power thru
connector
• Up to 10 luminaires total per circuit when used with ETC R20
relay module or Unison
- Consult breaker trip curves when used with other
equipemnt
• Requires power from a non-dimmable source
• Inrush:
- 120V: 35A (First half-cycle)
- 240V: 49A (First half-cycle)
• ETL Listed to UL1573
LED*
• 20,000-hour LED life (at 70% intensity)
• 40 Luxeon
*See additional LED notes and photometrics on page 3
COLOR
• Exclusive RGB-L Color array
- Also available in Deep Blue array
• Unparrallelled brightness and color range
• Droop compensation maintains color accuracy during use
• Optically calibrated to ensure consistency across fixture
OPTICAL
• Homoginized optics for a consistent, smooth beam
• Primary field angle of 24.9° and beam angle of 14.5°
• Secondary lenses available for multiple beam-spread options.
Refer to accessories charts for lenses available
CONTROL
• DMX512 in and thru via five-pin XLR or RJ45 connectors
(End-of-line termination required)
• RGB, IRGBS, Direct and single channel control (See DMX
control table for additional information)
• 15-bit virtual dimming engine provides smooth, high-quality
theatrical fades
• RDM support for address and setting changes
• Local control of presets (12) and sequences (5)
THERMAL
• Luminiare is designed for continuous operation up to 104°F
(40°C) ambient temperature and requires free flow of air
around fixture housingAmbient operating temperature of 32°
to 104°F (0° to 40°C)
• Active electronic thermal management using variable-speed
fan
®
Z LED emitters (five per optic)
®
Echo Relay Panel.
ADDITIONAL ORDERING INFORMATION
Power Input Cables
Use information below to order 5’ power input leads with factory-fitted connectors.
MODEL DESCRIPTION
DPA-A 5ft PowerCon to parallel blade U-ground
(Edison) connector
DPA-B 5ft PowerCon to 20A two-pin and ground (stage-pin)
connector
DPA-C 5ft PowerCon to grounded 20A twistlock connector
DPA-X 5ft PowerCon to bare-end power input lead
Note: One cable of your choice is incldued with each fixture
Power-Thru Jumpers
Power thru jumpers connect to luminaire’s output (thru) connector to provide power
to a successive luminaire in-line
MODEL DESCRIPTION
DPJ-5 5ft PowerCon to PowerCon
DPJ-10 10ft PowerCon to PowerCon
fixture to fixture jumper
fixture to fixture jumper
Luminaire Accessories
MODEL DESCRIPTION
CSL1Y ColorSource Linear 1 Yoke
CSL1DY ColorSource Linear 1 Double-Yoke
CSLBD ColorSource Linear barn door
CSLL ColorSource Linear louver
400CC C-Clamp (does not ship with fixture)
400SC Safety Cable (32in)
DPSJ-25 25ft PowerCon to Edison
inline switch
input power cable with
2 of 7
ETC
0
5000
10000
15000
20000
25000
30000
35000
-15 -10 -5 0 5 10 15
Candela
Degrees
X
Y
Field Angle
Beam Angle
®
PHOTOMETRICS
ColorSource® Linear
ColorSource Series
ColorSource Linear
Mode Degree Candela Field
Lumens
Full / RGB 27.6 35,621 2,481 1,382 93.2 26.6
Full / Direct 27.6 37,616 2,611 1,439 104 25.1
3200K / RGB 27.6 33,601 2,363 1,330 78.9 29.9
5600K / RGB 27.6 35,269 2,461 1,387 93.9 26.2
Red / RGB 27.6 8,190 568 305 27.8 20.4
Green / RGB 27.6 11,073 699 366 30.4 23.0
Blue / RGB 27.6 3,369 225 121 32.9 32.9
Metric conversions: For meters, multiply feet by 0.3048
For lux, multiply footcandles by 10.76
15.6˚ 27.6˚
Throw Distance (d) 10ft
3.0m
Field Diameter 4.9ft
1.5m
Illuminance (fc) 356 158 89 57 1
Illuminance (lux) 3,834 1,704 959 613 10.76
To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared
For field diameter at any distance, multiply distance by 0.491
For beam diameter at any distance, multiply by 0.274
15ft
4.6m
7.4ft
2.2m
Beam
Lumens
20ft
6.1m
9.8ft
3.0m
Power
Consumption
25ft
7.6m
12.3ft
3.7m
Lumens
Per Watt
188.7ft
57.5m
–
Candela Plot
Iso-Illuminance Diagram
(Flat Surface Distribution)
10%
50%
% illuminance
foot candle
or lux
3 of 7
Loading...