Eschenbach Optik TVi Color User Manual

TVi Color

User Manual

Rev D EN
1
Contents of the Package
Control box containing the control circuitry
Mouse camera
Mains transformer to supply low-voltage power to
the control box
Video output lead for connection to the television
SCART adapter (Europe only) for televisions without
an RCA connector
Cleaning cloth for cleaning the camera’s mirror.

Installation

Connect the mouse camera to the front panel of the TVi Color.
Plug the transformer into a wall socket and insert the connector to the TVi control box.
Connect one side of the video cable to the controller box and the other side to the yellow video-in socket of your television set.
If the television has a Scart input only, use the provided Scart adapter to connect the video cable.
Switch the TVi Color on by pressing the red power switch on the back of the unit.
Switch your television on and use it's remote control or front panel button to switch to "Video", sometimes called "AV" or marked .
You should now have the picture from the TVi Color on the screen.
Rev D EN
2

Controls

There are two buttons on the mouse: a mode button and a brightness button. These buttons are replicated on the control box front panel.

Mode Control

The mode button will switch between the three different display modes, namely:
Positive mode, which displays enhanced contrast black letters on a white background.
Negative mode, which displays enhanced contrast white letters on a black background.
Photo mode, which provides full color display showing images in their original colors. Photo mode is especially useful for looking at photographs and drawings. It should also be used for looking at faint text and handwriting.

Brightness control

TVi Color allows the user to set a brightness level for the camera’s image. This feature, for example, would allow the user to change a slightly grey background into a white background. The brightness level can be set in
Mode
Brightness
Scroll Zoom
Loading...
+ 7 hidden pages