Eschenbach Optik Fusion User Manual

USER MANUAL

Important Instructions for Use

The following instructions and warnings must be
observed:

• Remove Fusion and its power supply adapter from

the carry case during use.

• Use only the power supply adapter provided.

• Do not use Fusion in a bathroom, near water or

other damp conditions.

• Do not touch or place anything into the opening in

the mouse base.

• Do not open Fusion - there are no user serviceable

parts inside and opening it will invalidate your
warranty.

• Do not dispose of Fusion by fire. It should be

recycled or disposed of in accordance with local
ordinances.

Page 1

Table of Contents

Installation........................................................ 3

Mouse Camera ................................................. 5

Mouse Controls................................................ 6

Main Unit Controls ......................................... 8

Menu ................................................................. 8

Main Menu................................................... 10

Display Settings Menu................................. 10

Options Menu............................................... 11

Toggle on/off functions Menu ..................... 12

Mouse button functions Menu ..................... 12

Writing with Fusion ..................................... 13

Battery ............................................................ 14

Maintenance ................................................... 16

Technical Description.................................... 16

Warranty ........................................................ 17

Page 2

Installation

The Fusion is supplied the following components:

o Main unit incorporating the mouse camera
o Power supply adapter/charger
o Mains cable
o Carry case
o Cleaning cloth

When setting up, it is important to choose your
workplace carefully to avoid an uncomfortable or
awkward position. You should not have to raise your
arm to use the mouse; your wrist should be on the
resting on the surface. The display should be below
eye level to avoid strain.

Page 3

• Remove the Fusion main unit from its case and

place on the work surface.

• Flip open the lid by pressing on the front latch.

• Power up the Fusion by pressing the power

button, i.e. the right-most button on the front
panel.

When you place the unit on some text you should see
the magnified image on the screen. The base of the
main unit is fitted with rollers to allow the entire unit
to glide easily over what you want to read. Note: the
camera “sees” beneath the scroll zoom wheel, bear
this in mind when locating what you want to read.

Page 4

Mouse Camera

Fusion is great for reading something in a hurry; flip
up the lid, turn it on, and off you go. However, for
extended reading you will find it easier to use the
mouse outside the main unit. To remove the mouse,
flip open the cable housing cover, lift out the mouse
and unwind the cable.

You will find that the mouse is much lighter and
more agile, allowing you to get into the binding of
books or reading in awkward places.

When replacing the mouse, lift the cable housing
cover, drop it back into its holder, wind up the cable
and close the cover again.

Page 5