5.5kg Top Load Washing Machine
7kg Top Load Washing Machine
8kg Top Load Washing Machine
10kg Top Load Washing Machine
User Manual
ETLW55B
ETLW70B
ETLW80B
ETLW100B
Exctly wht
you need
Online:
esatto.house
Welcome
Residentia Group
—
Head Office
165 Barkly Avenue
Burnley, Victoria
Australia 3121
—
ACN
600 546 656
—
Online
residentia.group
—
Postage
PO Box 5177
Burnley, Victoria
Australia 3121
—
Telephone
1300 11 4357
Congratulations on purchasing your washing machine. The Esatto brand is proudly
distributed within Australia by Residentia Group Pty Ltd.
Please refer to the warranty card at the rear of this manual for information regarding your
product’s parts and labour warranty, or visit us online at: www.residentia.group
At Residentia Group, we are customer obsessed and our Support Team are there to
ensure you get the most out of your appliance. Should you want to learn more about your
washing machine such as the various washing modes or importantly taking care of the
appliance, our Support Team are here to help.
You can use our online Support Centre at anytime by visiting:
http://support.residentiagroup.com.au
Or you can contact us via phone by dialing: 1300 11 HELP (4357).
It is important that you read through the following use and care manual thoroughly to
familiarise yourself with the installation and operation requirements of your appliance
to ensure optimum performance.
Again, thank you for choosing an Esatto appliance and we look forward to being of
service to you.
For your safety, the information in this manual must be
followed to minimize the risk of re or explosion, electric
shock, or to prevent property damage, personal injury or
loss of life.
• This appliance is not intended for use by
persons(including children) with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
• The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
• The openings must not be obstructed by a carpet.
• This appliance is intended to be used in household and
similar applications such as:
− sta kitchen areas in shops, oces and other
working environments;
− farm houses;
− by clients in hotels, motels and other residential
type environments;
− bed and breakfast type environments;
− areas for communal use in blocks of ats or
in launderettes.
Explanation of the following signal words:
WARNING!
This signal word indicates a potentially dangerous situation
which may result in death or serious injuries unless it’s
avoided.
CAUTION!
This signal word indicates a potentially dangerous situation
which may result in slight or minor injuries or damage to
property and the environment.
NOTE!
This signal word indicates a potentially dangerous situation
which may result in slight or minor injuries.
Model
ETLW55B5.5kg0.03MPa~0.8MPa
ETLW70B7.0kg0.03MPa~0.8MPa
ETLW80B8.0kg0.03MPa~0.8MPa
ETLW100B10.0kg0.03MPa~0.8MPa
Washing
Capacity
Standard Water
Pressure
User Manual:
Page:
5
WARNING!
POTENTIAL ELECTRIC SHOCK
• This appliance is for indoor use only.
• Do not position washing machine in a humid place.
• Do not insert your hands into running spin-dry tub.
• If the spin-dry tub does not stop within 15 seconds after
opening the cover, please stop using the machine and
have it repaired.
• Before performing any maintenance on the device,
unplug the appliance from the mains.
• Always unplug the machine and turn o the water
supply after use. The max. inlet water pressure, in
pascals. The min. inlet water pressure, in pascals.
• To ensure your safety, power plug must be inserted into
an earthed three-pole socket. Check carefully and make
sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices must
be connected by a qualied technician in accordance
with the manufacturer's instructions and local safety
regulations.
RISK TO CHILDREN
• The appliance can be used by children aged from 8
years an d above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Animals and children may climb into the machine.
Check the machine before every operation.
• Young children should be supervised that they do not
play with the appliance.
• Machine may be very hot during the operation. Keep
kids and pets far away from the machine during the
operation very wet rooms as well as in the rooms with
explosive or caustic gas.
• Remove all packaging before using the appliance.
Otherwise, serious damage may result.
• The washing machine with single inlet valve only can be
connected to the cold water supply. The product with
double inlet valves should be correctly connected to the
hot water and cold water supply.
• Plug must be accessible after installation.
RISK OF EXPLOSION
• Do not wash or dry articles that have been cleaned in,
washed in, soaked in, or dabbed with combustible or
explosive substances( such as wax, oil, paint, gasoline,
degreasers, dry-cleaning solvents, kerosene, etc.) This
may result in re or explosion.
• Before hand thoroughly rinse items of washing by hand.
CAUTION!
INSTALLING THE PRODUCT
• This washing machine is for indoor use only.
• It isn't intended to be built-in using.
• The openings must not be obstructed by a carpet.
• Washing machine shall not be installed in bath room or
very wet rooms as well as in the rooms with explosive or
caustic gases.
• Remove all packaging and transport bolts before using
the appliance. Otherwise, serious damage may result.
• The washing machine with single inlet valve only can be
connected to the cold water supply. The product with
double inlet valves should be correctly connected to the
hot water and cold water supply.
• Plug must be accessible after installation.
RISK OF DAMAGING THE APPLIANCE
• Your product is only for home use and is only designed
for the textiles suitable for machine washing.
• Do not climb up and sit on top cover of the machine.
• Do not lean against machine door.
• Cautions during Handling Machine:
1. Transport bolts shall be reinstalled to the machine
by a specialised
2. The accumulated water shall be drained out of
the machine.
3. Handle the machine carefully. Never hold each
protruded part on the machine while lifting.
Machine door can not be used as the handle during
the conveyance.
4. This appliance is heavy. Transport with care.
• Please do not close the door with excessive force.
• Do not wash carpets.
OPERATING THE APPLIANCE
• Before washing the clothes at rst time, the product
should be operated in one round of the whole
procedures without the clothes inside.
• Do not wash ammable and explosive or toxic solvents.
• Do not use gasoline and alcohol etc. as detergents.
• Please only select the detergents suitable for machine
washing, especially for drum.
• Make sure that all pockets are emptied. Sharp and rigid
items such as coin, brooch, nail, screw or stone etc. may
cause serious damages to this machine.
• Please check whether the water inside the drum has
been drained before opening its door.
Please do not open the door if there is any water visible.
• Be careful of burning when the product drains hot
washing water.
• Never rell the water by hand during washing.
• After the program is completed, Please wait for two
minutes to open the door.
User Manual:
Page:
6
Your Washing Machine
PRODUCT DESCRIPTION
Top lidWater inlet valve
Frame
Power cord and plug
Control panel
Cabinet
Drain hoseAdjustable feet
NOTE!
The product line chart is for reference only, please refer to real product as standard.
ACCESSORIES
Handle
Inlet hose
assembly
NOTE!
If the drain hose is already installed on the machine, then there is no spring clamper and drain hose in the accessories.
Cabinet
baseboard
User
manual
ScrewSpring
clamper
Drain hose
User Manual:
Page:
7
Installation
INSTALLATION INSTRUCTIONS
It’s recommended to use the washing machine on its own dedicated power outlet
for both convenience and safety. The power outlet must be grounded.
IMPORTANT!
If the power cord is damaged, it must be replaced by Residentia Group or one of
it’s authorised service representatives. Please contact 1300 11 HELP (4357) and
ensure the appliance is completely disconnected from the power supply.
WARNING!
• Stability is important to prevent the product from moving!
• Make sure that the product should not stand on the power cord.
Before installing the machine, the location must be:
1. Rigid, dry, and a level surface
2. Avoiding direct sunlight
3. Sucient ventilation
4. Room temperature is above 0 °C
5. Kept far away from the heat resources such as coal or gas.
UNPACKING THE WASHING MACHINE
WARNING!
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suocation! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
INSTALLATION OF THE DRAIN HOSE
Drain hose inserted
into the drain
Clamping spring
User Manual:
Page:
8
Operating Instructions
WARNING!
To prevent leakage or water damage, follow the instructions in this chapter carefully:
• Do not kink, crush, modify, sever or protract the inlet hose or drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.
• If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.
Use an upper drain system to place the end of drain hose:
LEVELLING THE WASHING MACHINE
WARNING!
The lock nuts on all four feet must be screwed tightly against the housing.
1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original
positions tighten the nuts.
2. Check alignment of the product with a spirit level and if required, correct.
3. Loosen the lock nut and turn the feet until it closely contacts with to the oor.
4. After being locked properly, press four corners again to make sure that they has been
adjusted properly.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.