Ergotron 45-253-026 User Manual

ASSEMBLY INSTRUCTIONS

LX Wall Mount System

ENGLISH

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide - English Guía del usuario - Español

Manuel de l’utilisateur - Français Gebruikersgids - Deutsch Benutzerhandbuch - Nederlands Guida per l’utente - Italiano Användarhandbok - svenska

:

:

888-45-176-W-06 rev.U • 06/17

Includes

Constant Force™

Technology

1 of 18

1.38" - 3.75"

(35-95 mm)

50 lbs (22.7 kg)

7 - 25 lbs*

(3.2 - 11.3 kg)

0 - 5 lbs (0 - 2.3 kg)

ENGLISH

180°	70°

360°

	13"
	(330 mm)
180°	5°

180°	13" (330 mm)
360°

180°

3° 3°

90°

5°

* The lower most range of motion for vertical lift is decreased up to 4.5” (114 mm) when arm is adjusted to hold over 20lbs (9 kgs).

8.5” (216 mm)

< 4.5” (114 mm)

888-45-176-W-06 rev.U • 06/17

2 of 18

Components
	A	B			C		D
	1x				14x
1					1x
	2x
						14x
					2x
			2x
2							1/4-20 x 2"
	2x
		1x		1x
					7x
	2x
3			1x		4x
	3x	4x			7x
4					9x
			M4 x 8mm		1/4-20 x 1/2"
	1x	2x	2x	8x	1x	1x
5	2x				10-24 x 1/2"		2.5mm
	1x	2x		2x	12x	1x
6							1/8”
					M10 x 16mm			ENGLISH
7				4x	4x	1x
							6mm
					M4 x 10mm
	1x	4x
						1x	4mm
				4x
8	2x
		4x			M4 x 10mm
				2x			4x
9		M4.2 x 25mm			1x
					M3 x 6mm
	1x	1x			1x
10					2x
							M4 x 14mm
					1x

Tools Needed

7mm

Stud Finder

Ø 1/2” (12.7 mm)		Ø 3/16" (5 mm)
Hollow Wall		Wood	Studs ≥ 25 gauge steel
Pared		Madera	Pernos de acero de calibre ≥ 25
Mur		Bois	Goujons ≥ calibre 25 en acier
Wand		Solide Holzbalkenträger	Bolzen ≥ Blechlehre Nr. 25
Muur		Massief Houten Pilaren	Verbindingsbouten ≥ 25 gauge staal
Parete	Due montanti in legno massiccio		Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
			Reglar ≥ 25-gauge stål
			25
		25
			2
			1

888-45-176-W-06 rev.U • 06/17

3 of 18

1Mounting Height for Ergonomic Workstation

This mounting height is a recommendation for an ergonomic workstation that accommodates user heights of 5'0"-6'1" (152-185cm) when set up for standing and user heights of 5’0”-6’4” (152-193cm) when set up for sitting.

If user heights are different than this, you should change mounting height to accommodate user heights. (Change mounting height one inch for every one inch difference in user heights).

ENGLISH

6” (152 mm)

Mounting height assumes there is a 6” (152 mm) distance between the center of your monitor mounting holes and the top of the screen. If your distance is smaller, you should increase mounting height accordingly, if your distance is larger, you should decrease your mounting height accordingly.

		21”
		(533 mm)
		5’0” - 6’1”
		(152-185cm)
		47”
		(1194mm)
	< 30.5”	31.5”
		(800mm)
	(775mm)
		21”
		(533 mm)
		5’0” - 6’4”
		(152-193cm)
		31.5”
		(800mm)
	< 21.5”	22.5”
		(571mm)
	(546mm)

	21”
	(533 mm)
	5’0” - 6’1”
	(152-185cm)
	50.5”
	(1283mm)
	35.4”
< 34.4”	(899mm)
(874mm)

	21”
	(533 mm)
	5’0” - 6’4”
	(152-193cm)
	35”
	(889mm)
	26.4
< 25.4”	(670mm)
(645mm)

Determine mounting location:
Front view with arm pushed back against the wall.
		Top view showing range of motion when pulled out from the wall.
		14.7”
		(373mm)
	2”	8.2”
		(207mm)
	(50mm)
	0.6”	2.5”
17.7”	(14mm)	(63mm)
(449mm)	20.7”
	(526mm)
4 of 18		888-45-176-W-06 rev.U • 06/17

2

WARNING: Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment. Mounting to wall surfaces that do not meet this criteria may result in an unstable, unsafe condition which could lead to personal injury and/or property damage. Consult a construction professional if you have any doubt about what this means in regard to your particular application.

CAUTION: Make sure the wall mount bracket is level, flush and snug to the wall surface. DO NOT OVERTIGHTEN THE BOLTS.

ENGLISH

Wood	Studs ≥ 25 gauge steel		Hollow Wall
Madera	Pernos de acero de calibre ≥ 25		Pared
Bois	Goujons ≥ calibre 25 en acier		Mur
Solide Holzbalkenträger	Bolzen ≥ Blechlehre Nr. 25		Wand	≥ 5/8”
Massief Houten Pilaren	Verbindingsbouten ≥ 25 gauge staal		Muur
Due montanti in legno massiccio	Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)		Parete
Reglar ≥ 25-gauge stål
	25	6		Sheetrock	7
25
				Sheetrock
				Plaque de plâtre
				Rigipsplatte
				Sheetrock
				Cartongesso
				Gipsskiva
				Requires minimum material thickness of 5/8” (16 mm).
				Requiere un grosor mínimo de 16 mm.
				Epaisseur minimum de 16 mm.
				Requer uma espessura mínima de 5/8” (16 mm).
				Mit einer Materialdicke von mindestens 16 mm.
				Vereist een minimale materiaaldikte van 1.6 cm.
				Richiede uno spessore del materiale non inferiore a 16 mm.
				5/8” (16 mm)
				5/8”(16 mm).

888-45-176-W-06 rev.U • 06/17

5 of 18

ENGLISH

Wood	Studs ≥ 25 gauge steel
Madera	Pernos de acero de calibre ≥ 25
Bois	Goujons ≥ calibre 25 en acier
Solide Holzbalkenträger	Bolzen ≥ Blechlehre Nr. 25
Massief Houten Pilaren	Verbindingsbouten ≥ 25 gauge staal
Due montanti in legno massiccio	Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
	Reglar ≥ 25-gauge stål
	25
	25
a	b	c

Stud Finder

d Ø 3/16" (5 mm)	e	f
		3	8

x 5

Wood Stud Mounting

7x

Studs ≥ 25 gauge steel

Pernos de acero de calibre ≥ 25 Goujons ≥ calibre 25 en acier Bolzen ≥ Blechlehre Nr. 25

Verbindingsbouten ≥ 25 gauge staal

Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm) Reglar ≥ 25-gauge stål

25

25

7x

888-45-176-W-06 rev.U • 06/17

6 of 18