Page 1
PowerLite® Pro Z8000WUNL/Z8050WNL
Quick Reference
This Quick Reference card gives brief instructions on connecting your
PowerLite projector and using common features. For details, install and
view the User’s Guide from the projector’s CD-ROM.
(optional)
(optional)
S-Video cable (optional)
Composite video cable (BNC)
HDMI cable (optional)
DVI-D cable (optional)
Component-to-VGA cable
(optional)
Component-to-VGA cable
VGA cable
Note: The illustration above shows the PowerLite Pro Z8000WUNL. If you are using
the PowerLite Pro Z8050WNL, the projector and interfaces are slightly different.
Page 2
Installing the Manuals
1. Insert the projector CD in your
computer’s CD or DVD drive.
(Double-click the Epson installer
icon, if necessary.)
2. Select your language, select your
projector model, and follow the
instructions on the screen to register.
Then click Projector User’s Guides
to install the manual(s). (If you are
using Windows
have Adobe® Reader®, click Adobe
Reader to install it also.) Then click
Exit.
3. To view the manuals, doubleclick the PL Pro Z8000WUNL_
Z8050WNL Guide, Network
Operation Guide (for PowerLite
Pro Z8050WNL users only), or
EasyMP Monitor Operation Guide
(for Windows users only) icon on
your computer’s desktop.
®
and you don’t
Turning the Projector On
1. Turn on your computer or image
source.
2. Make sure you’ve installed the lens
(not included), then remove the
lens cover. (See the instructions
that came with the lens for more
information.)
3. Press the
the power light stays green, the
projector is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the power button;
just plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the on-screen User’s Guide.
power button. After
Switching Between Image Sources
Press the Search button (remote
control), one of the Source buttons
(remote control), or the
Search button (projector).
Source
Adjusting Image Position
Press the Lens Shift button (remote
control) or Lens button (projector)
until Adjust Lens Shift is displayed
on the screen.
To adjust the position, use the
button (remote control) or arrow
buttons (projector).
Press the button repeatedly to make
fine adjustments. Press and hold the
button to make larger adjustments.
If the projector is on a table, you can
level the image by turning any of the
projector’s adjustable feet.
4. If your image does not appear, see
“Switching Between Image Sources”
or “Troubleshooting.”
Page 3
Focusing the Image
Press the Focus button (remote control)
or Lens button (projector) until Adjust
Focus
is displayed on the screen.
To adjust the focus, use the button
(remote control) or the arrow buttons
(projector).
Correcting Image Shape
• If your image looks like or ,
press the or button on the
projector to correct it.
• If your image looks like or ,
press the
correct it.
• If your image is uneven on all sides,
you can use Quick Corner® to
adjust the shape. See the
on-screen User’s Guide.
or button to
Changing the Aspect Ratio
Press the Aspect button on the remote
control to change the aspect ratio.
For images input through the
Computer port, select Normal to
automatically resize the image.
Zooming the image
Press the Zoom button (remote control)
or Lens button (projector) until Adjust
Zoom is displayed on the screen.
To reduce/enlarge the image, use the
button (remote control) or the arrow
buttons (projector).
Turning the Projector Off
Press the power button to turn
the projector off. At the confirmation
message, press the power button
again.
Note: If the Direct Power On function is
enabled, you can unplug the projector or flip
the switch controlling the outlet to which the
projector is connected instead. To turn on
this feature, see the on-screen User’s Guide.
With Epson’s Instant Off® technology,
you don’t have to wait for the projector
to cool down; just turn it off or unplug
it when you’re done.
Page 4
Troubleshooting
If you see a blank screen or the
message No signal
• Make sure the power light on
the projector is green and not
flashing, and the lens cover is
removed.
• Make sure the cables are
connected correctly. See the
on-screen User’s Guide.
• You may need to change the
image source. See “Switching
Between Image Sources.” (Also
make sure the source device is
turned on.)
If the projector and the notebook
don’t display the same image
Windows
Press the function key on your
keyboard that lets you display on an
external monitor (allow a few seconds
for the projector to sync up after you
press the key). It may be labeled CRT/
LCD or have a icon, and you
may have to hold down the Fn key
while pressing it.
If that doesn’t work, open the Display
utility in the Windows Control Panel
(in Windows Vista®, right-click on the
desktop and select Personalize, then
select Display Settings). Next, click
Settings and Advanced or Advanced
Settings. Make sure the external
monitor port is set as your primary
display and/or enabled. See your
computer’s documentation or online
help for details.
Mac OS® X
From the Apple® menu, select System
Preferences, Display or Displays,
Detect Displays, VGA Display or
Color LCD, and Arrangement or
Arrange. Then select Mirror Displays.
Where to Get Help
Internet support
Visit epson.com/support where
you can download utilities and
documentation, get FAQs and
troubleshooting advice, or e-mail
Epson.
Speak to a support representative
To use the Epson PrivateLine® Support
service, call (800) 637-7661 and
enter the PIN on the included Epson
PrivateLine Support card. This service
is available 6 AM to 6 PM, Pacific
Time, Monday through Friday, for
the duration of your warranty period.
You may also speak with a projector
support specialist by dialing one of the
following numbers.
U.S.: (562) 276-4394, 6 AM to 6 PM,
Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 AM to
6
PM, Pacific Time, Monday-Friday
Days and hours of support are subject
to change without notice. Toll or long
distance charges may apply.
Purchase supplies and accessories
You can purchase screens and other
accessories from an Epson authorized
reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
www.epsonstore.com (U.S. sales) or
www.epson.ca (Canadian sales).
Page 5
Remote Control Map
Turn the projector
on and off
Select a source
Open projector menus
Navigate through menu
settings; move pointer
Select menu settings
Change slides in
PowerPoint
Automatically adjust
Adjust image position
®
(optional
wireless mouse
receiver required)
Temporarily turn off
computer image
display
Change the
aspect ratio
Switch image sources
Remote control ID
switch
Select an image
projected over a network
(Z8050WNL only)
Open menus assigned
by user
Cancel current
operation or return to
previous menu
Activate screen pointer
Enlarge part of
an image
Freeze the image
Select from 7 color
modes
Use numeric keys to
enter passwords, IP
settings, etc.
Enter passwords
Display on-screen help
Reduce or enlarge
image
Page 6
Replacement Parts
Product Part Number
Replacement lamp one-pack (ELPLP51) V13H010L51
Replacement lamp two-pack (ELPLP52) V13H010L52
Air filter V13H134A23
You can purchase replacement parts from an Epson
authorized reseller. See “Where to Get Help” inside this card
for more information.
Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2009 Epson America, Inc. 10/09
CPD-27504R1
Printed in XXXXXX
Loading...