Epson Z11000WNL, Z11005NL, Z9800WNL, Z9870NL, Z9900WNL Quick Reference Guide

PowerLite® Pro Z9870NL/Z11005NL/Z9800WNL/
Z9900WNL/Z11000WNL

Quick Reference

This Quick Reference card gives brief instructions on connecting your

PowerLite projector and using common features. For details, see the

online User’s Guide.

S-Video cable

BNC video cable

HDBaseT cable

Ethernet cable

DVI-D cable

HDMI cable

5BNC-to-VGA cable

VGA cable

Wireless LAN module

VGA-to-component cable

VGA cable

Remote control cable

Turning the Projector On

1. Turn on your computer or image
source.

2. Remove the projector lens cover.

3. Press the On button. After the

power and Status lights stay blue,

the projector is ready.

Note: If the Direct Power On function is

enabled, you can turn the projector on
without pressing the On button; just
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User’s Guide.

4. If your image does not appear, see
“Switching Between Image Sources”
or “Troubleshooting.”

Changing the Language of the Projector Menus

The default language of the projector’s
menu system is English, but you can
change it as necessary.

1. Press the Menu button to acess the

projector’s menu system.

2. Select Extended and press .

Switching Between Image Sources

Press the Search button or one of
the source buttons (remote control),
or one of the source buttons
(projector).

Adjusting Image Position

Press the Lens Shift button on the
remote control or projector until
Adjust Lens Shift is displayed on the
screen.

Press the arrow buttons on the
remote control or projector to adjust
the position.

3. Select Language and press .

4. Select your language and press .

5. When you’re done, press Menu

to exit.

If the projector is on a table, you can
level the image by turning any of the
projector’s adjustable feet.