
Unveiling the world's finest real Hi–Defenition Projector. Featuring a new generation of revolutionary 
Crystal Clear Fine.
PRODUCT TYPE  
PRODUCT NAME 
PRODUCT CODE 
PROJECTION SYSTEM  
PROJECTION METHOD 
Home Theatre Projectors
Epson EMP-TW2000 
V11H262053 
RGB Liquid Crystal Display 
Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS 
LCD 
Size
0.74 inches wide panel MLA (C2 
Fine, D7, 12Bit) 
Driving method Poly-Silicon TFT Active Matrix 
Native resolution 1080P Full HD (1920 x 1080)
Pixel number
2073600 pixels (1920 x 1080 
pixels) x 3 
Aspect ratio 16:9 
Pixel arrangement Stripe
50Hz or 60Hz (based on input 
signal)
PROJECTION LENS 
Refresh Rate 
Type manual: zoom / focus
F-number 2.0 - 3.17 
Focus length 22.5 - 47.2mm 
Zoom ratio 1.0:2.1
LAMP 
SCREEN SIZE (PROJECTED 
DISTANCE) 
LENS SHIFT RANGE 
Type 170 W UHE E-TORL Lamp 
30 to 300 inch (0.87m to 9.03m) (Wide) 
30 to 300 inch (1.88m to 19.15m) (Tele) 
Vertical: 96.3% max. (upward & downwards) 
Horizontal: 47.1% max. (Left and Right)
BRIGHTNESS 
CONTRAST 
COLOUR PROCESSING 
COLOUR REPRODUCTIVITY 
COLOUR SPACE  
VIDEO QUALITY 
High Brightness Mode 1600 ANSI lumens 
50000:1 (Colour Mode: Dynamic, Lamp brightness: Zoom: 
Wide, Lens shift: Full, Auto iris: On)
Full 10 bit 
Full Colour (10.07 Billion Colours) 
115% of NTSC 
Interlace - Progressive conversion 3D Y/C separation, 
Noise reduction
Colour Mode ( Dynamic, Zoom: 
Wide, Lens shift: V10 / H 
Centre )
EFFECTIVE SCANNING FREQUENCY RANGE (Analog/Digital) 
PIXEL CLOCK 
HORIZONTAL 
VERTICAL
13.5MHz to 150MHz 
15 to 80KHz 
24Hz, 50 to 85Hz
ADJUSTMENT FUNCTION 
PROJECTOR / REMOTE 
CONTROL
TILT ANGLE 
KEYSTONE CORRECTION 
EPSON CINEMA FILTER
AUTO IRIS
EPSON SUPER WHITE
2:2 PULL DOWN 
(1080p/24 fps Capability)
Brightness / Contrast / Tint / Saturation / Input signal etc. 
0 to 2.1 degrees
N/A 
Controlled automatically with color mode 
(ON: Theatre Modes / Natural / x.v colour, OFF: Living 
Room / Dynamic)
Controlled automatically adjusting to video source 
(Available at colour mode except x.v. Colour, User 
selectable ON/OFF on OSD)
Controlled automatically adjusting to video source 
(Available at Natural/Theatre/Theatre Black 1 and 2; user 
selectable ON/OFF on OSD)
On/Off 
(Default off, HDMI & Component input only)
FAN NOISE 
HIGH BRIGHTNESS MODE 
WHISPER MODE
32dB (Colour mode: Dynamic Lamp brightness: High) 
24dB (Colour mode: Theatre Black 1 and 2)
ANALOGUE RGB I/O 
DISPLAY PERFORMANCE 
INPUT SIGNAL 
INPUT TERMINAL 
Native 1125p 
Resize 1280 x 1024 / 1360 x 768 / 1024 x 768 / 
800 x 600 / 640 x 480 / 1125p / 1125i / 
750p / 625p / 525p / 625i / 525i 
Signal type Separate signal 
Video signal Analog (0.7V p-p,75 ohm/ Mac0.714Vp-p, 
Sync.signal Separate (positive & negative, bi-polarity 
75ohm)
2-5Vpp) / Composite (positive & negative, 
bi-polarity 2-5Vpp) / Sync-on-green 
(negative, 0.3Vpp) 
Video Mini D-sub 15 pin x 1 Blue molding
HDMI Ver.1.3 
DISPLAY PERFORMANCE
Native 1125p 
Video standard
1125p / 1125i / 750p / 625p / 525p / 625i / 
525i 
Video signal TMDS (Signal for HDMI) 
Input Terminal HDMI(V1.3) x 2
VIDEO I/O 
COMPONENT INPUT 
INPUT SIGNAL
INPUT TERMINAL
Video standard 1125p / 1125i / 750p / 625p / 525p / 625i / 
Video signal Component Video (Analog Y level 0.7V 75 
525i 
ohm / Cr Cb level +/-0.35V 75 ohm / sync. 
negative 0.3V or 3-state +/-0.3V on Y) 
  RCA x 3 (Red / Green / Blue) 
COMPOSITE / S VIDEO 
INPUT SIGNAL
INPUT TERMINAL
Video standard
Video signal
S-Video Mini DIN 
Composite Video RCA (Yellow) x 1
NTSC / NTSC4.43 / PAL / M-PAL / N-
PAL / PAL60 / SECAM
Composite Video (1.0Vpp / Sync.negative, 
75 ohm) / S-Video (Luminous 0.714Vpp, 
Chrominous 0.286Vpp, 75 ohm)
CONTROL I/O 
SERIAL I/O 
I/O terminal D-sub 9 pin x 1 
I/O signal RS-232c
LOCK FUNCTION  
OPERATING 
TEMPERATURE  
DIRECT POWER ON  
COOL-DOWN PERIOD  
POWER SUPPLY VOLTAGE  
POWER CONSUMPTION 
Operation Lock & child-lock 
5°C to 35 °C (41°F to 95 °F) at 20% ~ 80% Humidity 
Yes
Approx 16 seconds 
100-240 VAC ±10%, 50/60Hz 
240W (Lamp High), 200W (Lamp Low)
DIMENSIONS 
EXCLUDE FEET 406mm(W) x 310mm(D) x 124mm(H) 
MAXIMUM DIMENSION 406mm(W) x 353mm(D) x 143mm(H) 
WEIGHT Approx. 5.6kg
ACCESSORIES 
POWER CORD 
REMOTE CONTROL 
BATTERY 
USER'S MANUAL 
LENS CAP 
WARRANTY* 
* For more information visit Epson
3m 
Stick type (backlight) 
Alkaline, AA x2 (Included) 
Included 
Included 
3 years * including lamp
 Projector Warranty
Product Options 
Product Code Item Code Description
V13H010L39 V13H010L39 Lamp
Usage Conditions 
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where 
human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and 
recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. 
Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended 
by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.
Copyright@ Epson Australia - 2007