How it Works
Epson
Loading...
SC-T3400N Series
Operator's Manual
16 pgs4.38 Mb0
Setup Manual
20 pgs2.4 Mb0
User Manual
192 pgs17.92 Mb0
Table of contents
Loading...

Epson SC-T5400 Series, SC-T3400 Series, SC-T3400N Series User Manual

Download
Page 1
User's Guide
CMP0155-00 EN
Page 2
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Contents

Contents
Introduction
Notes on Manuals.......................... 5
Meaning of Symbols...................... 5
Illustrations............................ 5
Product Model Descriptions................ 5
Manual Organization..................... 5
Printer Parts.............................. 7
Front................................. 7
Inside................................. 9
Control panel.......................... 13
Home screen operations.................. 13
Features of Printer......................... 15
Realizing High Productivity................ 15
Realizing High Resolution................. 15
Notes on Usage and Storage.................. 17
Installation space........................ 17
Notes when using the printer............... 17
Notes when not using the printer............ 18
Notes on handling ink cartridges............ 18
Notes on handling paper.................. 19
Saving Power............................. 20
Introducing the Software
Provided
Built-in
How to Use Web Cong..................... 23
How to Use Epson Edge Dashboard............ 24
Updating Soware or Installing Additional
Soware................................ 25
Uninstalling Soware...................... 26
Soware
Soware
How to Start........................... 23
Closing............................... 23
Function Summary...................... 23
How to Start........................... 24
Closing............................... 24
Checking Whether Updates Available and
Updating Soware....................... 25
Receiving Update Notications............. 25
Windows............................. 26
Mac................................. 26
......................... 21
in the Printer................ 22
Loading and Setting the Paper
Notes on Loading the Paper.................. 27
Paper Load Position........................ 27
Loading and Removing the Roll Paper.......... 28
Cutting the Roll Paper.................... 31
Removing Roll Paper..................... 33
Loading and Removing Cut Sheet(1 sheet)....... 35
Loading Cut Sheet(1 sheet)................ 35
Removing Cut Sheet (1 Sheet).............. 36
Setting Loaded Paper....................... 37
For Roll Paper.......................... 37
Optimizing Paper Settings (Media Adjust)....... 41
Notes on Making Adjustments.............. 41
Paper Feed Adjust (Auto).................. 42
Print Head Alignment (Auto)............... 42
Printing with the Printer Driver from Your Computer
Basic Operating Procedures (Windows)......... 44
Customizing the Printer Driver............. 47
Basic Operating Procedures (Mac)............. 50
Customizing the Printer Driver............. 52
Printing CAD Drawings.................... 54
Enlargements and Horizontal and Vertical
Banners................................ 56
Fitting Documents to the Width of the Roll
Paper................................ 57
Fitting Documents to the Output Size......... 58
Choosing a Print Size..................... 60
Printing at Non-Standard Sizes............... 61
Borderless Printing........................ 65
Types of Borderless Printing Methods......... 65
Supported Paper........................ 65
About Roll Paper Cutting.................. 66
Setting Procedures for Printing............. 67
Correct color and print..................... 69
Color Management Printing.................. 73
2
Page 3
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Contents
Setting color management with the applications. 74 Setting color management with the printer
driver................................ 76
Multi-Page Printing (N-up).................. 80
Folded 2-Sided Printing (Windows only). . . . . . . . 81
Poster Printing (Windows Only).............. 82
Printing Multiple Documents (Layout Manager)
(Windows Only).......................... 87
Setting Procedures for Printing............. 88
Saving and Recalling Settings............... 89
Printing Using the HP-GL/2 or HP RTL Mode from a Computer
Printer Settings........................... 90
Basic Print Settings...................... 90
HP-GL/2
CAD Application Settings................... 91
Specic
Print Settings............. 90
Changing the Network Connection Methods
General Settings....................... 120
Printer Status/Print..................... 139
Enlarged Copy menu...................... 140
Memory Device menu..................... 141
Replacing Consumables
Handling of Used Consumables.............. 144
Replacing Ink Cartridges................... 144
Replacing Maintenance Box................. 146
Replacing the Cutter...................... 147
Problem Solver
What to do When a Message is Displayed. . . . . . . 149
When a Maintenance Call/Printer Error Occurs. . 150
Troubleshooting......................... 151
You cannot print (because the printer does
not work)............................ 151
e print head moves, but nothing prints.. . . . . 153
e prints are not what you expected........ 154
Feeding or ejecting problems.............. 165
Others.............................. 168
Switching to Wired LAN.................... 92
Switching to Wireless LAN................... 92
Directly Connection Wirelessly (Wi-Fi Direct). . . . 93
Printing Using AirPrint
Direct Printing of Files on USB Flash Memory
Making Enlarged Copies with an A3 or A4 Scanner
Connecting the Scanner..................... 97
Making Enlarged Copies.................... 97
Placing Documents in the Scanner............. 98
Using the Menu
Menu List.............................. 100
Paper Setting menu....................... 112
Roll Paper menu....................... 112
Cut Sheet(1 sheet) menu................. 117
Printer Status menu....................... 119
Settings menu........................... 120
Appendix
Options and Consumable Products............ 169
Epson Special Media.................... 169
Ink Cartridges......................... 169
Others.............................. 170
Supported Media......................... 171
Epson Special Media Table................ 171
Supported Commercially Available Paper. . . . . 175
Printable area........................... 178
Cut Sheet............................ 179
Moving or Transporting the Printer........... 180
Notes for Moving or Transporting the Printer. . 180 Moving to a Dierent Location in the Same
Handling if Transporting/Leaving the Printer
in an Environment of -10°C or Less......... 181
System Requirements...................... 182
Printer Driver......................... 182
Web Cong........................... 183
Epson Edge Dashboard.................. 184
Specications Table....................... 185
For European users..................... 186
3
Page 4
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Contents
Where To Get Help
Technical Support Web Site................. 188
Contacting Epson Support.................. 188
Before Contacting Epson................. 188
Help for Users in Europe................. 189
Help for Users in Australia................ 189
Help for Users in Singapore............... 190
Help for Users in ailand................ 190
Help for Users in Vietnam................ 190
Help for Users in Indonesia............... 190
Help for Users in Hong Kong.............. 191
Help for Users in Malaysia................ 191
Help for Users in India................... 191
Help for Users in the Philippines........... 192
4
Page 5
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Introduction

Introduction

Notes on Manuals

Meaning of Symbols

Wa r ni n g :
Caution:
Important:
c
Note:
Warnings must be followed to avoid serious bodily injury.
Cautions must be followed to avoid bodily injury.
Important must be followed to avoid damage to this product.
Notes contain useful or additional information on the operation of this product.
Setup Guide (booklet)
Operator's Guide(booklet or PDF)
General Information (PDF)
Online Manual
User's Guide (this manual)
Administrator's Guide (PDF)
Provides information on how to setup the printer after unpacking it from the box. Make sure you read this manual to perform operations safely.
Provides selected information on how to use the printer and frequently used features of the printer.
Provides important safety instructions, printer specications details.
Provides overall information and instructions on using the printer and on solving problems.
Provides network administrators with information on management and printer settings.

Viewing PDF Manuals

and contact
U
Indicates related reference content.

Illustrations

illustrations may
e you are using. Please be aware of this when using the manuals.
slightly from the model
dier

Product Model Descriptions

Some models described in this manual may not be sold in your country or region.

Manual Organization

e manuals for the product are organized as shown below.
is section uses the Adobe Acrobat Reader DC as an example to explain the basic operations for viewing the PDF in Adobe Acrobat Reader.
You can view the PDF manuals using Adobe Acrobat Reader or Preview (Mac).
5
A
Click to print the PDF manual.
Page 6
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
B
Each time it is clicked the bookmarks are hidden or shown.
C
Click the title to open the relevant page.
Click [+] to open the titles lower in the hierarchy.
D
If the reference is in blue text, click the blue text to open the relevant page.
To return to the original page, do the following.
For Windows
While pressing the Alt key, press the .
For Mac
While pressing the command key, press the .
E
You can input and search for keywords, such as the names of items you want to
For Windows
conrm.
Right click on a page in the PDF manual and select Find in the menu that is displayed to open the search toolbar.
For Mac
Select Find in the Edit menu to open the search toolbar.
F
To enlarge the text in the display that is too small to see well, click
. Click to reduce the size. To specify a part of an illustration or screenshot to enlarge, do the following.
For Windows
Right click on the page in the PDF manual and select Marquee Zoom in the menu that is displayed. e pointer changes to a magnifying glass, use it to specify the range of the place you want to enlarge.
For Mac
Click View menu - Zoom - Marquee Zoom in this order to change the pointer to a magnifying glass. Use the pointer as a magnifying glass to specify the range of the place you want to enlarge.
G
Opens the previous page or next page.
6
Page 7
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction

Printer Parts

Front

e illustration shows the SC-T3400 Series (24 inch model with stand).
A Front cover
Open the cover when cleaning inside of the printer or clearing jams.
B Maintenance box cover
Open the cover when replacing the Maintenance Box.
U “Replacing Maintenance Box” on page 146
C Paper basket
Output from the printer collects in this basket, keeping the media clean and free of creases.
D Casters
ere are two casters on each leg. e casters are normally kept locked once the printer is in place.
E Cartridge cover
Open when replacing ink cartridges.
U “Replacing Ink Cartridges” on page 144
7
Page 8
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
F Control panel
U “Control panel” on page 13
G Roll paper cover
is cover protects the loaded roll paper and prevents dust from entering inside the printer. Except when load‐ ing or removing roll paper, it should be closed when using the printer.
U “Loading Roll Paper” on page 28
H Alert lamp
is lamp lights or ashes when an error occurs.
Lights or ashes: An error occurred. How the lamp lights or ashes varies with the type of error. e control
panel displays a description of the error.
O: No error.
I Cut sheet cover
Open the cover when loading a cut sheet of paper.
U “Loading Cut Sheet(1 sheet)” on page 35
8
Page 9
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction

Inside

A Spindle holder
ere is a holder on both the le and right sides. Place the both ends of the spindle.
U “Loading Roll Paper” on page 28
B Paper slot
e slot through which roll paper and cut sheets are fed during printing.
C Print head
Fires ink via high density nozzles while moving le and right to print.
D Attachments
Attach them to the spindle for loading a 3 inch core roll of plain paper.
U “Loading Roll Paper” on page 28
E Spindle
When loading roll paper into the printer, insert this through the roll paper.
F Movable ange (transparent)
is xes the roll paper placed on the spindle. Attach or detach it when placing or removing roll paper on/from the spindle.
9
Page 10
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
G Guide
When loading a cut sheet of paper, load the sheet while sliding its edge against the guide.
U “Loading and Removing Cut Sheet(1 sheet)” on page 35
10
Page 11
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction

Side (right side)

A USB port (for USB ash drive)
You can insert USB ash drive for direct printing.
U “Direct Printing of Files on USB Flash Memory” on page 95
B Ve nts
Do not block the vents. U “Installation space” on page 17
C AC inlet
Connect the supplied power cable here.
D USB port
Use when connecting to a computer using a USB cable.
E OPTION port
Connect a scanner to perform enlarged copying.
U “Making Enlarged Copies with an A3 or A4 Scanner” on page 97
F LAN port
Connects the LAN cable.
11
Page 12
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
G Data light (yellow)
e network connection status and data reception are indicated by a lit or ashing light.
On: Connected.
Flashing: Receiving data.
H Status light (green, orange)
e color indicates the network transmission speed.
O:
10BASE-T
Orange: 100BASE-TX
Green: 1000BASE-T
12
Page 13
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction

Control panel

A Home button
Touch this button while a menu is displayed to return to the Home screen. e home button is when it cannot be used during operations such as paper feeding.
B
Plight (power light)
On : e power is on.
o

Home screen operations

Overview of Home screen operations U Operator's Guide(booklet or PDF)
A Information display area
Displays the printer's status, error messages, and so on.
Flashing :
printer is performing a process
e such as starting up, powering o, data receiving, or print head cleaning. Please wait without performing any operation until this light stops ashing. Do not disconnect the power cord.
:
O
C
Pbutton (power button)
power is
e
o.
Turns the power on and o.
D Screen
is is a touch panel to display the printer's status, menus, error messages, and so on. You can select the menu items and options displayed on this screen by gently touching (tapping) them, and scroll the screen by moving your nger while it remains touching the screen.
B Roll paper information area
❏ When roll paper is loaded
Displays information on the loaded roll paper. When Manage Remaining Amount is set to On, the approximate remaining amount (remaining length) is displayed. Touching this area displays a menu to perform operations such as setting and adjusting the roll paper. U “Roll Paper menu” on page 112
❏ When roll paper is not loaded
Displays "---". Touching this area displays the procedure for loading roll paper.
C Paper Setting menu button
Touch this button when loading, removing, setting, or adjusting paper.
❏ See the following for more details on Roll Paper.
U “Loading and Removing the Roll Paper” on
page 28
Menu descriptions U “Roll Paper menu” on
page 112
❏ See the following for more details on Cut Sheet(1
sheet). U “Loading and Removing Cut Sheet(1 sheet)” on
page 35
Menu descriptions U “Cut Sheet(1 sheet) menu”
on page 117
13
Page 14
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
D Printer Status menu button
Touch this button when you want to check the status of consumables or details of displayed notications.
U “Printer Status menu” on page 119
E Settings menu button
Touch this button when you want to perform maintenance or congure the printer operation settings, network settings, or other settings. See the following for more details.
U “Settings menu” on page 120
F Information icon
When there are
notications,
such as consumable remaining amount low warnings, the number of notications is indicated by a badge at the top right of this icon. If you touch this icon when the badge is displayed, a list of the notications that require your action is displayed. Touching each item displays instructions on what to do. If you do not perform the actions, the badge will not disappear.
G Network icon
network connection status is indicated by an
e icon as shown below.
Wi-Fi Direct (simple AP) connection is enabled.
H Consumables status icon
Estimates of the remaining amounts of ink cartridges and the empty space in the Maintenance Box are indicated by the length of the bars. e shorter a bar is, the lower the remaining amount of ink or space.
When
is displayed, the remaining amount of the corresponding ink cartridge or the amount of empty space in the Maintenance Box is low. Touching the icon displays the consumables status screen so that you can check the ink cartridge and Maintenance Box product numbers. is is a shortcut button for Supply Status in the Printer Status menu.
U “Printer Status menu” on page 119
Note:
Connecting a supported scanner to the printer displays a Enlarged Copy button on the screen.
Inserting USB ash drive into the printer displays a Memory Device button on the screen.
Touching the icon allows you to switch the net‐ work connection status.
U “Changing the Network Connection Methods”
on page 92
Not connected to a wired LAN or the wired LAN or wireless LAN not set.
Connected to a wired LAN.
Wireless LAN (Wi-Fi) is disabled.
Searching for SSID, IP address not set, or signal strength is 0 or poor.
Connected to a wireless LAN (Wi-Fi). The number of lines indicates the signal strength. The more lines there are, the better the signal strength.
Wi-Fi Direct (simple AP) connection is disabled.
U “Making Enlarged Copies with an A3 or A4
Scanner” on page 97 U “Direct Printing of Files on USB Flash Memory” on page 95
14
Page 15
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction

Features of Printer

Realizing High Productivity

High-speed printing
e speeds of the print head and paper feed have been increased for faster printing.
e printer is equipped with a high-speed rotary cutter for quick cutting, signicantly increasing productivity.
Support for large-capacity roll paper
Roll paper up to 170 mm outer diameter can be loaded. is reduces roll paper replacement time and person-hours, enabling ecient high-volume printing.
Reducing print waste with the print head nozzle self-cleaning function
e printer has a Self Check and Cleaning function that automatically detects and removes clogging of print head nozzles. quality from clogging.
U “General Settings - Printer Settings” on page 122
reduces decreases in print
is
U “Printing CAD Drawings” on page 54
Posters and displays that are vivid and also allow for short-term outdoor display
Posters with vivid hues can be printed simply by selecting, for example, Poster (Photo)/Perspective in Select Target of the supplied printer driver.
Short-term outdoor display is even supported since ink that also has excellent light fastness is used.
Your posters will last even longer if you use lamination processing.
e eect diers depending on the paper.

Insistence on Ease-of-Use

Back and side can be placed next to a wall
Roll paper loading and all replacements, including ink cartridges, Maintenance Boxes, and cutter, are performed from the front, allowing the back and side of the printer to be placed against a wall. You do no need to turn the printer around, thus it can easily be situated in conned spaces.

Realizing High Resolution

CAD drawings that are clear, legible, and can even be used safely outdoors
Newly-developed Epson UltraChrome XD2 ink enables the printer to produce extremely detailed drawings both in black and white and in color.
e supplied printer driver oers a line drawing mode, making it easier to optimize printing for line drawing and, through unsurpassed reproduction of line drawing and ne lines in the form of connected lines, diagonals, and curves, ensuring the best possible results when the printer is used for drawings.
In addition, you can even safely take your drawings outdoors with you because they are printed using ink with excellent water resistance.
See the following for dimensions.
U “Specications Table” on page 185
Checking current operating status even from afar thanks to an alert lamp
Errors such as ink or paper running out are immediately obvious even at a distance, thanks to the large, highly visible alert lamp.
Smooth operation while checking the operating instructions on the screen
In addition to having a screen design that enables intuitive operation, this printer allows you to check illustrated instructions of operations such as how to load paper.
15
Page 16
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
U Operator's Guide(booklet or PDF)
Printer driver that is simple and easy to operate
Print settings can be optimized simply by choosing the desired use or target. is spares you the trouble of adjusting print settings individually. When you select a Source setting, printing failures due to paper loading mistakes are reduced because the size and type of paper loaded in the printer are applied automatically. In addition to checking the set conditions in an illustration in the printer driver, you can also check a detailed image in the preview screen before printing.
Support for wireless LAN connection
is printer can be freely placed where desired without considering cable routing because it can connect with a computer via a wireless LAN to print. Of course, it also supports a wired LAN connection.
Furthermore, even if your device is not connected to a LAN, this printer also allows printing by directly connecting with it using Wi-Fi Direct. From an iOS device, you can also print easily using AirPrint.
U “Switching to Wireless LAN” on page 92
U “Directly Connection Wirelessly (Wi-Fi Direct)”
on page 93
U “Printing Using AirPrint” on page 94
16
Page 17
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction

Notes on Usage and Storage

Installation space

Make sure that you secure the following space, clear of any other objects, so that paper ejection and consumable replacement are not obstructed.
See the dimensions of the printer.
U “Specications Table” on page 185
SC-T5400 Series/SC-T3400 Series
“Specications
Table“ for the external
WD H
SC-T3400N
Series
1230 mm 1288 mm 735 mm

Notes when using the printer

Note the following points when using this printer to avoid breakdowns, malfunctions, and print quality decline.
❏ When using the printer, observe the operating
temperature and humidity range described in the "Specications Table".
U “Specications Table” on page 185 Even when the conditions above are met, you may not be able to print properly if the environmental conditions are not suitable for the paper. Be sure to use the printer in an environment where the paper's requirements are met. For more details, see the documentation supplied with the paper. Also, when operating in dry areas, air conditioned environment, or under direct sunlight, maintain the appropriate humidity.
SC-T5400
Series
SC-T3400
Series
SC-T3400N Series
WD H
1535 mm 1350 mm 1210 mm
1230 mm 1350 mm 1210 mm
❏ Do not install the printer next to heat sources or
directly in the path of air from a ventilator or air conditioner. Failure to observe this precaution could result in the print head nozzles drying and clogging.
❏
❏ When the power is on, do not remove the power
❏ e printer may automatically perform print head
print head may not be capped (i.e., may not
e move to the right-hand side) if an error occurs and the printer is turned o without rst resolving the error. Capping is a function for automatically covering the print head with a cap (lid) to prevent the print head from drying out. In this case, turn on the power and wait a while until capping is performed automatically.
plug or cut the power at the breaker. e print head may not be capped properly. In this case, turn on the power and wait a while until capping is performed automatically.
cleaning to maintain good printing quality. Please wait until cleaning nishes without opening any of the covers or turning o the power.
17
Page 18
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction

Notes when not using the printer

If you are not using it, note the following points when storing the printer. If it is not stored correctly, you may not be able to print properly the next time it is used.
❏ When storing the printer, store it at with the ink
cartridges installed. Do not place the printer tilted, upright, or upside down.
❏ If you do not print for a long time, the print head
nozzles may become clogged. We recommend that you print once a week to prevent the print head from clogging.
❏
❏ Store the printer
roller may leave an impression on paper that
e is le in the printer. is can also cause wavy or curled paper resulting in paper feeding problems or the print head could be scratched. Remove any paper when storing.
aer conrming head has been capped (the print head is positioned at the far right). If the print head is le uncapped for a long time, the print quality may decline.
Note:
If the print head is not capped, turn the printer on, and then turn it o.
that the print

Notes on handling ink cartridges

Note the following points when handling ink cartridges to maintain good print quality.
❏ e ink cartridges packaged with your printer are
partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. is one-o process consumes a quantity of ink and therefore these cartridges may print fewer pages compared to subsequent ink cartridges.
❏ We recommend that ink cartridges be stored at
room temperature out of direct sunlight and used before the expiry date printed on the packaging.
❏ To ensure good results, we recommend that all the
ink in the cartridge be used within a year of installation.
❏ Ink cartridges that have been stored at low
temperatures for an extended period should be allowed to return to room temperature over a period of at least four hours.
❏ Do not touch the IC chips on the ink cartridges.
You may not be able to print properly. U “Replacing Ink Cartridges” on page 144
❏ To prevent the accumulation of dust and other
foreign matter in the printer, close all covers before placing it in storage. If the printer will be not be used for an extended period, protect it with an anti-static cloth or other cover. e print head nozzles are very small, and they can become clogged easily if ne dust gets on the print head, and you may not be able to print properly.
❏ e print head may fail if the environmental
temperature becomes -10°C or lower. If the environmental temperature in the room or during transport is expected to become -10°C or lower, be sure to discharge the ink in advance.
U “Handling if Transporting/Leaving the
Printer in an Environment of -10°C or Less” on page 181
❏ Install ink cartridges into all slots. You cannot
print if any of the slots are empty.
❏ Do not leave the printer without ink cartridges
installed. e ink in the printer may dry, preventing it from printing as expected. Leave ink cartridges in all slots even while you do not use the printer.
❏ e ink level and other data are stored in the IC
chip, allowing cartridges to be used removed and replaced.
❏ To avoid getting dirt on the ink supply port, store
the removed ink cartridge properly. e ink supply port has a valve in it so it does not need to be capped.
❏ Removed ink cartridges may have ink around the
ink supply port, so be careful not to get any ink on the surrounding area when removing the cartridges.
aer
being
18
Page 19
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
❏ To maintain the quality of the print head, this
printer stops printing before ink cartridges are completely expended.
❏ Although the ink cartridges may contain recycled
materials, this does not aect printer function or performance.
❏ Do not dismantle or remodel ink cartridges. You
may not be able to print properly.
❏ Do not drop or otherwise subject an ink cartridge
to a strong impact. Ink may leak from the cartridge.
❏ A mixture of color inks may be used to print black
depending on the paper type and print quality settings even for black and white and grayscale printing.

Notes on handling paper

Note the following points when handling and storing the paper. If the paper is not in good condition, print quality may decline.
Check the documentation supplied with each paper.
Notes on Handling
❏ Use Epson special media under normal room
conditions (temperature: 15 to 25°C, humidity: 40 to 60%).
❏ Do not wet the paper.
❏ Do not throw away the paper packaging as you
can use it for storing the paper.
❏ Avoid locations that are subject to direct sunlight,
excessive heat, or humidity.
❏ Keep cut sheets in their original package aer
opening, and keep them in a at place.
❏ Remove roll paper that is not in use from the
printer. Rewind it correctly and then store it in the original packaging that came with the roll paper. If you leave the roll paper in the printer for a long time, its quality may decline.
Notes on handling printed paper
To maintain long lasting, high quality print results, note the following points.
❏ Do not rub or scratch print outs. If they are
rubbed or scratched, the ink may peel o.
❏ Do not touch the surface of print outs. e ink
may peel o.
❏ Make sure the print outs are completely dry before
folding of stacking; otherwise, the color may change where they touch (leaves a mark). marks will disappear if they are separated immediately and dried; however, they will remain if not separated.
ese
❏ Do not fold the paper or scratch the surface of the
paper.
❏ Avoid touching the printable surface of the paper
with your bare hands. Moisture and oils from your hands can aect print quality.
❏ Handle paper by the edges. We recommend
wearing cotton gloves.
❏ Changes in temperature and humidity may cause
paper to become wavy or curled. Check the following points.
❏ Load the paper just before printing.
❏ Do not use wavy or curled paper.
For roll paper, cut o the wavy or curled parts and then load it again. For cut sheets, use new paper.
❏ If you put the print outs in an album before they
are completely dry, they may be blurred.
❏ Do not use a dryer to dry the print outs.
❏ Avoid dire ct sunlight.
❏ Prevent color distortion while displaying or
storing the print outs by following the instructions in the paper's documentation.
19
Page 20
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
Note:
Typically, print outs and photos fade over time (color distortion) due to the eects of light and various constituents in the air. media. However, with the correct storage method, the degree of color distortion can be minimized.
❏ See the documentation supplied with Epson special
media for detailed information on handling the paper aer printing.
❏ e colors of photos, posters, and other printed
materials appear dierent under dierent lighting conditions (light sources
from this printer may also appear dierent under dierent light sources. * Light sources include sunlight, uorescent light, incandescent light, and other types.
also applies to Epson special
is
*
). e colors of print outs

Saving Power

printer enters sleep mode or turns
e automatically if no operations are performed for a set period. You can adjust the time before power management is applied. Any increase will product's energy
eciency.
Please consider the
environment before making any change.
o
aect
the
Power O Timer
is function automatically turns the printer o if no errors occur, no print jobs are received, and no control panel or other operations are performed for a set period of time.
e default setting diers as follows depending on the model.
❏ SC-T5400/SC-T3400/SC-T3400N/SC-T5480/
SC-T3480N Set to 8h.
❏ SC-T5460/SC-T3460/SC-T3460N/SC-T5430/
SC-T3430 Set to O.
Power O Timer settings can be changed from the Basic Settings menu.
U “General Settings - Basic Settings” on page 120
Sleep mode
e printer enters sleep mode when there are no errors, no print jobs being received, and no control panel or other operations performed. When the printer enters sleep mode, the control panel's screen turns o and the internal motors and other parts switch o to consume less power.
Sleep mode is exited if a print job is received or the screen of the control panel is touched.
e delay before the printer enters sleep mode can be selected from values between 1 and 210 minutes. At default settings, the printer enters sleep mode if no operations are performed for 15 minutes. e delay can be changed from the Basic Settings menu.
U “General Settings - Basic Settings” on page 120
Note:
When the printer enters sleep mode, the control panel's screen goes blank as if the power has been turned o,
but the P light remains lit.
20
Page 21
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Introducing the Software

Introducing the Software

Provided Software

e following table lists the provided soware.
e supplied soware disc contains the soware for Windows. When using a Mac or a computer without a disc drive, download the soware from http://epson.sn and then install it.
For details on the various soware, see the online help of each soware or the Administrator's Guide (online manual).
Note:
Convenient soware compatible with this printer is introduced on the Epson website. Please check the information from the following link.
http://www.epson.com
Software Name Function
Printer Driver Install the printer driver to take full advantage of the functionality of this printer when
printing.
U “Printing with the Printer Driver from Your Computer” on page 44
EPSON Software Updater Software to check whether there is any software update information and then notify
you and install the software if an update is available. It allows you to update the rmware and already installed software of the printer.
U “Updating Software or Installing Additional Software” on page 25
LFP Print Plug-In for Oce
(Windows Only)
Epson Edge Dashboard
*
Plug-in software for Microsoft Oce applications (Word, Excel, and PowerPoint). Installing this plug-in displays ribbon items in Oce applications that give quick access to horizontal and vertical banner printing and enlarged printing.
It can be installed by selecting it in the Additional Installation screen when installing the software. You can also install it later with EPSON Software Updater.
The supported Microsoft versions are shown below.
Oce 2003/Oce 2007/Oce 2010/Oce 2013/Oce
Convenient software for administrating multiple printers. This enables conrmation in a list of the status of printers registered for monitoring. This also allows simple copying of Custom Paper Settings congured on a single printer to congure multiple other printers.
U “How to Start” on page 24
U “Closing” on page 24
2016
21
Page 22
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introducing the Software
Software Name Function
EpsonNet Cong Software to congure the initial settings of the network or change the settings of the
network in bulk when installing or relocating Epson printers and scanners.
EpsonNet Cong is not installed automatically. Download it from the Epson website and then install it if necessary.
http://www.epson.com
For Windows, you can install the software from the following folder on the supplied software disc.
\\Network\EpsonNetCong
U Administrator's Guide
*Download software from the Internet, and install. Connect the computer to the Internet and install.

Built-in Software in the Printer

e following soware comes preinstalled in the printer. Start and use it from a Web browser via the network.
Software Name Function
Web Cong The network security settings can be congured from Web Cong. This software also
has an email notication function for notifying of printer errors and other problems.
U “How to Use Web
Cong
” on page 23
22
Page 23
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introducing the Software
How to Use Web
is section describes how to start the soware and provides a summary of its functions.
Cong

How to Start

Start the soware from a web browser on a computer or smart device that is connected to the same network as the printer.
Check the IP address of the printer.
A
To u ch connected network, and check the IP address.
Note:
e IP address can also be checked by printing a network connection check report. A report can be printed by touching the following in order from the Home screen.
Settings - General Settings - Network Settings ­Connection Check
Start a Web browser on a computer or smart
B
device connected to the printer via the network.
Enter the IP address of the printer in the
C
address bar of the Web browser and press the Enter or Return key.
Format:
IPv4: http://IP address of printer/
IPv6: http://[IP address of printer]/
Example:
IPv4: http://192.168.100.201/
on the Home screen, select the

Function Summary

is section introduces the main functions of Web Cong. See the Administrator's Guide for more details.
Main Functions
❏ Check the printer's status, such as the remaining
amount of ink.
❏ Check and update the printer's rmware version.
❏ Congure the printer's network settings and
advanced security settings, such as SSL/TLS communication, IPsec/IP ltering, and IEEE802.1X, which cannot be congured with the printer alone.
❏ Edit the custom paper settings and export and
import the settings.
custom paper settings registered in Settings -
e
General Settings - Printer Settings - Custom Paper Setting of the printer can be changed as
well as exported to a (registered) to another printer. is is convenient when you install multiple printers and want to use common custom paper settings for them.
and then imported
le
IPv6: http://[2001:db8::1000:1]/

Closing

Close the Web browser.
23
Page 24
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introducing the Software

How to Use Epson Edge Dashboard

How to Start

Epson Edge Dashboard is a Web application that resides on your computer. Starting the computer will automatically start Epson Edge Dashboard and this remains running.
Display the screen as follows.
A
Windows
From the Taskbar on the Windows desktop, click the Epson Edge Dashboard icon, and select Show Epson Edge Dashboard.
Alternatively, from Start, click All apps (or All
Programs) - Epson Dashboard.
Mac
From the desktop menu, click the Epson Edge Dashboard icon, and select Show Epson Edge Dashboard.
e Epson Edge Dashboard screen appears.
Soware
- Epson Edge
B
See the Epson Edge Dashboard help for more details.

Closing

Close the Web browser to close the Epson Edge Dashboard screen. Since Epson Edge Dashboard is a resident soware on the computer, it does not stop running.
24
Page 25
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introducing the Software

Updating Software or Installing Additional Software

When you install the soware during setup as described in the Setup Guide, Epson is installed. Epson update the rmware and already installed soware in your computer as well as install additional soware compatible with the printer.
Note:
e soware is updated as needed for greater convenience and more robust functionality. We recommend setting to receive update notications with Epson Soware Updater and updating the soware as soon as possible when there is a notication.
Soware
Updater allows you to
Soware
Checking Whether Updates
Updater
Select the
C
and then update them.
Follow the on-screen instructions.
c
Do not turn o the computer or printer during the update.
Note:
Soware not displayed in the list cannot be updated with Epson Soware Updater. Check the latest versions of soware on the Epson website.
Please note that you cannot update or install soware using Epson Soware Updater if you are using a Windows Server OS. Download the soware from the Epson website.
http://www.epson.com
soware
Important:
or manuals to be updated
Receiving Update Notications
Available and Updating Software
Check that the computer and printer are in the
A
following states.
❏ Computer is connected to the Internet.
❏ Printer and computer can communicate.
Start Epson
B
❏ Windows
Soware
Display the list of all the programs and then click Epson Soware Updater in the Epson Soware folder.
Note:
❏ If you press the Windows key (key with
Windows logo mark) on the keyboard and then type the soware name in the search box of the displayed window, the soware appears immediately.
❏ e soware can also be started by clicking
the printer icon on the Taskbar of the desktop and then selecting Soware Update.
Updater.
Windows
Start Epson Soware Updater.
A
Click Auto update settings.
B
Select the interval to perform the update check
C
in the Interval to Check eld of the printer and then click OK.
Mac
e soware is set by default to check and notify whether there are updates every 30 days.
❏ Mac
Select Go - Applications - Epson
EPSON Soware Updater.
Soware
-
25
Page 26
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introducing the Software

Uninstalling Software

Windows

Important:
c
❏ You must log in as an Administrator.
❏ If the password or conrmation of an
administrator is requested, enter the password and then continue with the operation.
Turn o the printer, and unplug the interface
A
cable.
Close all applications running on your
B
computer.
Go to the Control Panel and click Uninstall a
C
program from the Programs category.
Select the printer icon, and then click OK.
E
Follow the on-screen instructions to continue.
F
When the delete conrmation message appears, click Ye s .
Restart the computer if you are reinstalling the printer driver.
Mac
When reinstalling or upgrading the printer driver or other soware, follow the steps below to uninstall the target soware rst.
Select the soware you want to remove and
D
then click Uninstall/Change (or Change/ Remove / Add/Remove).
You can remove the printer driver and EPSON Status Monitor 3 by selecting EPSON SC-XXXXX Printer Uninstall.
Printer Driver
Use the "Uninstaller".
Downloading the Uninstaller
Download the "Uninstaller" from the Epson website.
http://www.epson.com/
Using the Uninstaller
Follow the instructions on the Epson website.
Other Software
Drag and drop folder with the soware name from the Applications folder into Tr a sh to delete.
26
Page 27
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Loading and Setting the Paper

Loading and Setting the Paper

Notes on Loading the Paper

Caution:
Do not rub the edges of the paper with your hands. e edges of the paper are thin and sharp and could cause an injury.
Do not load roll paper with the right and left edges uneven
Loading roll paper with the right and uneven may cause paper feeding problems or paper meandering may occur during printing. Rewind the paper to make the edges even before using roll paper or use roll paper with no problem.
le
edges

Paper Load Position

Roll paper and cut sheets can be loaded. See the following for more details on the paper that can be used with the printer.
U “Supported Media” on page 171
Roll Paper
Roll paper from 254 mm to the maximum printable width can be loaded.
Do not load curled paper
Loading curled paper may cause paper jams or soiled prints. Flatten the paper before use by bending it in the opposite way or use paper with no problem.
Unsupported paper
Do not use paper that is wavy, torn, cut, folded, too thick, too thin, has a sticker axed, etc. Doing so may cause paper jams or soiled prints. See the following for paper supported by the printer.
U “Epson Special Media Table” on page 171
U “Supported Commercially Available Paper” on
page 175
Cut Sheet(1 sheet)
One sheet of cut paper from A4 to the maximum printable width can be loaded.
27
Page 28
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
Note:
e paper slot for Roll Paper and Cut Sheet(1 sheet) is the same. Insert either one into the paper slot.

Loading and Removing the Roll Paper

Place the roll paper on the supplied spindle and then load the roll paper in the printer.
When replacing paper, remove the loaded paper rst.
U “Removing Roll Paper” on page 33 U “Removing Cut Sheet (1 Sheet)” on page 36
e supplied attachment is only used when loading a 3 inch core roll paper.
Important:
c
printer only supports plain paper for 3 inch
e roll cores. Epson cannot guarantee feed and print quality for 3 inch roll cores for other than plain paper.
Check that "Load paper." is displayed on the
A
Home screen and then open the cut sheet cover and the roll paper cover.

Loading Roll Paper

Note:
You can load the paper while viewing the loading procedure on the screen. To view the procedure on the screen, touch the Roll paper information area of the Home screen.
Remove the inserted spindle.
B
28
Page 29
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
Pull o the transparent
from the spindle.
ange
C
Attach or remove the attachments in
D
accordance with the roll core size of the roll paper.
2 inch roll core
e attachments are not required. Remove the attachments from the attached to the anges.
Push the two tabs on the ange outwards to remove the attachment.
you remove the attachment from the
Aer black ange, remove the attachment from the spindle.
if they have been
anges
3 inch roll core
Attach the attachments to the both anges. Align the triangle marks on the those on the attachment, and push in until the tabs are secured.
ange
with
Place the roll paper on a at surface and then
E
insert the spindle.
With the black ange is on the right, orient the roll paper so that the leading edge is as shown in the gure below.
Push the ange to the roll paper until there is
F
no gap between the ange and roll paper.
29
Page 30
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
Attach the transparent
G
there is no gap between the ange and roll paper.
If there are gaps between the anges at both ends and the roll paper, the paper may be fed skewed resulting in an error.
Orient the black ange of the spindle to the
H
right side, and place the spindle into the grooves on the
and right.
le
and push it until
ange
Check that the leading edge of the roll paper is
J
not bent and then insert it into the paper slot until you hear a beep.
Slide the spindle in along the rails, and set the
I
spindle‘s both ends in the spindle holders.
Important:
c
Insert the paper straight into the paper slot. Inserting it skewed will cause a skew error or paper jam.
Note:
If the leading edge of the roll paper is not horizontal or not cut cleanly, it will be cut automatically aer loading completes. However, it will not be cut if Auto Cut is set to O.
Close the roll paper cover and cut sheet cover.
K
On the displayed screen, set the paper type that
L
matches the loaded paper and set remaining amount management if necessary.
If a barcode giving information on the paper is printed on the roll paper
When the paper is loaded, the barcode is read automatically, and the media type and roll paper remaining settings are automatically. You can start printing once Ready appears on the screen.
congured
30
Page 31
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
If a barcode giving information on the paper is not printed on the roll paper
See the following. U “For Roll Paper” on page 37
For SC-T5400 Series and SC-T3400 Series,
M
check that the paper basket attached to the stand is open.
Note:
Close the paper basket before printing banners or other documents of sizes that will not t in the paper basket. Before the paper ejected from the printer touches the oor, we suggest that you take it in both hands close to the paper eject slot and continue to lightly support it until printing is complete.

Cutting the Roll Paper

Auto Cut
Note:
❏
❏ To turn o auto cut for HP-GL/2 mode
Touch the Roll paper information area -
B
Feed/Cut Paper from the Home screen of the printer aer printing nishes.
Use the buttons displayed on the screen to cut and feed the paper.
When cutting at the printer default cut position (right
auto cut setting of the printer driver has
e priority over that of the printer. e auto cut setting of the printer driver is reset to the default setting of Normal Cut when the application closes.
printing, enlarged copying, or direct printing from a USB setting of the printer. Touch the Roll paper information area - Advanced Media Setting
- Auto Cut - O from the Home screen. change to the setting is saved as a setting of the currently selected paper type.
drive, turn o the auto cut
ash
the bottom margin)
aer
e
Auto Cut is set to On for the printer by default. When On is set, the roll paper is cut automatically at the following times.
❏ When the leading edge is detected as not
horizontal
the roll paper is loaded, the leading edge
Aer part is cut straight.
❏ When printing of one page is
e roll paper is cut before printing of the next page starts.
If you do not want to cut each page or you want to cut at a desired position, see the following procedure.
nished
Cutting after Last Page Printed or at Desired Position
Turn o auto cut in the printer driver, print, and then cut using the Feed/Cut Paper menu of the printer aer printing nishes.
Touch t he and the paper leading edge returns to the print wait position.
When cutting at desired position
With the front cover closed, while looking into the printer, touch and hold down the (Forward) or (Backward) button until the position you want to cut comes to the position of the dotted line in the gure.
A cut position cannot be set further inside than the bottom margin.
(Cut) button. e paper is cut
Select O in Advanced - Roll Paper Option -
A
Auto Cut of the printer driver and then print.
Leave the auto cut setting of the printer on.
31
Page 32
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
Important:
c
❏ If commercially available synthetic or canvas
paper is cut with the built-in cutter, the cutter may be damaged or its life may be shortened. When using such paper, cut the paper with scissors as described in the following procedure.
❏ Do not use a cutter. e printer may be
damaged.
A
Tu r n o the auto cut setting and then print.
To print cut lines, turn o the auto cut setting of the printer. When printing via the printer driver, also turn o the setting of the printer driver.
Touch t h e (Cut) button.
e paper is cut.
Note:
When the length of than the following length, the paper is fed automatically until the required length is obtained at the time of cutting.
❏ Plain paper or tracing paper: 100 mm
❏ Photo paper or coated paper: 80 mm
❏ Synthetic paper and other thick paper:
60 mm
in the gure is shorter
❏ Printer settings
Roll paper information area - Advanced Media Setting - Auto Cut - O from the Home screen.
❏ Printer driver settings
Advanced - Roll Paper Option - Auto Cut ­O
Touch the Roll paper information area -
B
Feed/Cut Paper from the Home screen of the printer aer printing nishes.
Operate the buttons displayed on the screen.
C
When printing cut lines at the printer default position (right aer the bottom margin)
Touch t he cut lines selection screen appears.
(Cut) button. e cut or print
Cutting Commercially Available Synthetic or Canvas Paper with Scissors
When using commercially available paper that cannot be cleanly cut with the cutter of the printer, print cut lines and cut the paper with scissors.
32
Page 33
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
When printing cut lines at desired position
With the front cover closed, while looking into the printer, touch and hold down the (Forward) or (Backward) button until the position of the cutting lines you want to print comes to the position of the dotted line in the gure.
We recommend that you return the paper to its original package and store it package for use when printing.
Touch the Roll paper information area -
A
Remove from the Home screen.
e paper is rewound and ejected.
When Manage Remaining Amount is set to On, the barcode is automatically printed prior to rewinding.
Note:
If printed paper is not cut and remains, a conrmation screen appears.
To uc h Cut to cut the paper at the default cut position or touch Print Cutting Guideline to print cut lines at the default position.
If you want to change the cut position or cut lines print position to a desired position, touch Close to cancel the message, and change the position in the Feed/Cut Paper menu.
and take it out of the
at,
Cut lines cannot be printed further inside than the bottom margin. Once you have moving the paper, touch print cut lines selection screen appears.
To u ch Print Cutting Guideline.
D
Cut lines are printed and the paper is ejected automatically to a position where it can be easily cut with scissors.
Cut the paper along the cut lines with scissors
E
and then touch Done.
e paper rewinds to return the paper leading edge to the print wait position.
(Cut). e cut or

Removing Roll Paper

nished
See the following for more details. U “Cutting the Roll Paper” on page 31
Open the cut sheet cover and the roll paper
B
cover.
Hold the
C
and remove the spindle from the spindle holder.
on both ends of the spindle
anges
is section describes how to remove and store roll paper aer printing.
e rollers may leave impressions on roll paper if you leave the paper loaded in the printer. In addition, the paper may become wavy or curled due to damp, which may cause paper feeding problems, paper jams, or soiled prints.
33
Page 34
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
Detach the transparent
ange
D
Remove the spindle from the roll paper.
E
Important:
c
rewinding the roll paper carefully, store
Aer it in the original package.
Attach the transparent
F
return the spindle in the printer.
ange
from the spindle.
to the spindle and
Close the roll paper cover and cut sheet cover.
G
34
Page 35
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper

Loading and Removing Cut Sheet(1 sheet)

Loading Cut Sheet(1 sheet)

When roll paper is loaded, remove it. U “Removing Roll Paper” on page 33
Note:
You can load the paper while viewing the loading procedure on the screen. To view the procedure on the screen, touch Paper Setting - Cut Sheet(1 sheet) from the Home screen.
Check that "Load paper." is displayed on the
A
Home screen and then open the cut sheet cover.
Load a sheet of paper with the print side facing
B
up, align its right edge with the guide on the right, and move it downwards.
Important:
c
Insert all paper in portrait orientation. Inserting paper in landscape orientation may cause a decline in print quality.
Insert the leading edge of the paper straight into
C
the paper slot until you hear a beep.
Important:
c
Insert the paper straight into the paper slot. Inserting it skewed will cause a skew error or paper jam.
35
A dialog box to conrm that the paper is not skewed appears.
Page 36
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
If the paper is inserted straight, touch OK. To
D
reload the paper, touch Cancel.
If you have touched Cancel, load the paper again from step 2.
On the displayed screen, set the paper type and
E
size that match the loaded paper.
Not setting the appropriate paper type will cause print quality trouble. See the following for more details on the paper types and sizes.
U “For Cut Sheet(1 sheet)” on page 38
For SC-T5400 Series and SC-T3400 Series,
F
check that the paper basket attached to the stand is open.

Removing Cut Sheet (1 Sheet)

To remove cut sheet that was loaded but not used, eject using the procedure below.
To u ch Paper Setting - Cut Sheet(1 sheet) -
A
Remove from the Home screen.
is starts paper ejection operation.
Hold the edges of the paper with your hands,
B
touch OK on the screen, and pull the paper toward you.
36
Page 37
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper

Setting Loaded Paper

For Roll Paper

Congure the following settings aer loading roll paper.
Paper Type settings
is the most important setting to obtain the
is optimum print results. Not setting a paper type that matches the loaded paper will cause wrinkles, scung, uneven colors, and other trouble.
Manage Remaining Amount settings
When On is selected for Manage Remaining Amount, the printer tracks the following roll paper data.
❏ Roll paper remaining amount display
is displays the approximate remaining amount of roll paper on the printer's Home screen and on the printer driver screen. Furthermore, a notication can also be displayed when the remaining amount has become low.
When changing Paper Type
Proceed to step 2.
When setting Paper Remaining without changing Paper Type
Proceed to step 5.
When not changing either of them
To u ch OK. You can start printing once Ready appears on the screen.
Note:
e settings are conrmed if no operations are performed for 90 seconds on the above screen. To change the settings later, touch the Roll paper information area - Change Paper Type from the Home screen and then congure the settings.
To u ch Paper Type.
B
e following paper type selection screen appears.
❏ Remaining amount management when replacing
roll paper e following settings are recorded in a barcode printed on the roll.
amount of roll paper remaining, the value
e selected for remaining alert, and the paper type.
barcode is automatically printed at the end of
e the roll paper when the roll is rewound. e barcode is automatically read and settings adjusted the next time the roll paper is used, improving eciency when multiple rolls of paper are used.
How to Set
e currently set paper type is shown on the
A
screen displayed
loading roll paper.
aer
Note:
e most recently selected three paper types are displayed in addition to Others.
Select the paper type that matches the loaded
C
roll paper.
Epson Special Media
Select the same product name as the one shown on the package of the paper.
Commercially available non-Epson paper
Select from the following commercially available paper types.
37
❏ Plain paper
❏ Coated Paper(Generic)
❏ Photo Paper(Generic)
Page 38
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
❏ Trac ing Pap er
❏ Trac ing Pap er <L owD uty>
❏ Matte Film
To select a paper type that is not displayed on the screen, touch Others.
Select a category and select the target paper type.
Note:
If you scroll downward in the category selection screen, Custom Paper appears. To select custom paper that has already been registered, touch Custom Paper.
❏ Remaining Alert: Remaining amount value
that will be the timing for displaying the remaining amount warning
Note:
On the keypad screen for entering a numeric value, enter numbers that include a number of the
decimal place. For example, if you want to
rst enter 5 m, touch [5] and [0].
To u ch at the top
G
to the screen of step 5 and then touch OK.
You c a n st art p r i n t ing once Ready appears on the screen.
le
notication.
of the screen to return
When a paper type is selected, the screen
D
returns to the one in step 1.
If you will not set the remaining amount management setting, touch OK.
To u ch Paper Remaining.
E
To u ch Setup.
F
e setting changes to On, and Remaining Amount and Remaining Alert are enabled.
Touch each one and enter a value as follows.

For Cut Sheet(1 sheet)

Congure the following settings aer loading cut sheets.
Settings of Paper Type
is is the most important setting to obtain the optimum print results. Not setting a paper type that matches the loaded paper will cause wrinkles, scung, uneven colors, and other trouble.
Settings of Paper Size
Paper size will not be automatically detected. Set the size of the loaded paper.
❏ Remaining Amount: Total length of roll paper
(see the manual supplied with the roll paper)
38
Page 39
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
How to Set
e currently set paper type is shown on the
A
screen displayed
When changing Paper Type
Proceed to step 2.
When changing Paper Size without changing Paper Type
Proceed to step 4.
When not changing either of them
To u ch OK. You can start printing once Ready appears on the screen.
Note:
e settings are conrmed if no operations are performed for 90 seconds on the above screen. To change the settings later, touch the following in order from the Home screen and then congure the settings.
loading cut sheet.
aer
Note:
e most recently selected three paper types are displayed in addition to Others.
Select the paper type that matches the loaded
C
paper.
Epson Special Media
Select the same product name as the one shown on the package of the paper.
Commercially available non-Epson paper
Select from the following commercially available paper types.
❏ Plain paper
❏ Coated Paper(Generic)
❏ Photo Paper(Generic)
❏ Trac ing Pap er
❏ Trac ing Pap er <L owD uty>
❏ Matte Film
To select a paper type that is not displayed on the screen, touch Others.
Paper Setting - Cut Sheet(1 sheet) - Change Paper Type/Paper Size
To u ch Paper Type.
B
e following paper type selection screen appears.
Select a category and select the target paper type. When a paper type is conrmed, the screen returns to the one in step 1.
Note:
If you scroll downward in the category selection screen, Custom Paper appears. To select custom paper that has already been registered, touch Custom Paper.
39
Page 40
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
To u ch Paper Size.
D
If you will not change the paper size, touch OK.
Select a category and select the target paper size.
Note: Setting non-standard size
For a non-standard size, touch User-Dened at the end of the list and then enter the paper width and length.
On the keypad screen for entering a numeric value, enter numbers that include a number of the rst decimal place. For example, if you want to enter 5 m, touch [5] and [0].
When the screen of step 1 is redisplayed, touch
E
OK.
You can start printing once Ready appears on the screen.
40
Page 41
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper

Optimizing Paper Settings (Media Adjust)

Media Adjust has three main types.
❏ Easy Adjustment
❏ Paper Feed Adjust
❏ Print Head Alignment
Perform Easy Adjustment in the following cases.
❏ Print results have streaks (horizontal banding or
uneven colors)
❏ Duplicated ruled lines, warped lettering, or grainy
printing
❏ When registered with custom paper settings
Note: Adjustment for paper registered with custom paper settings
With roll paper and cut sheet, optimal paper settings will dier even when the paper types are the same. When registering roll paper and cut sheet with the same paper type, adjust for each of these. For details on custom paper setting, see the following Custom Paper Setting menu.

Notes on Making Adjustments

❏ Correctly load the paper that actually requires
adjustment and then select the paper type that matches the loaded paper.
❏ If paper with visible curls, wrinkles, waves, folds,
or bends is used, correct adjustment may not be possible. Remove curled, wavy, or folded sections by cutting them o.
❏ Ensure that light from outside (direct sunlight,
etc.) does not enter the interior of the printer. If this occurs, the printer may not be able to correctly read the adjustment pattern. If light enters the interior of the printer and automatic adjustment is not possible, then carry out manual adjustment.
U
page 154
❏ Automatic adjustment is not possible for
transparent or colored media. Use manual adjustment.
U “e prints are not what you expected” on
page 154
❏ Results of adjustment will dier depending on the
paper type.
U “Epson Special Media Table” on page 171 U “Before Printing on Commercially Available
Paper” on page 177
prints are not what you expected” on
“e
U “General Settings - Printer Settings” on page 122
However, if a problem with print results can be specied, then perform the following adjustment in accordance with the situation.
❏ If print results have streaks (horizontal banding or
uneven colors): Perform Paper Feed Adjust - Auto
U “Paper Feed Adjust (Auto)” on page 42
❏ If duplicated ruled lines, warped lettering, or
grainy printing: Perform Print Head Alignment - Auto
U “Print Head Alignment (Auto)” on page 42
e sensor reads adjustment patterns while it is printing for both of these, and automatically registers the optimum adjustment value to the printer.

Easy Adjustment

e sensor reads adjustment patterns while it is printing, and automatically registers the optimum adjustment value to the printer. is takes approximately 5 minutes.
e following shows the length and number of sheets of paper used for adjustment pattern printing.
❏ Roll paper: Approx. 344 mm
❏ Cut sheet: 1 sheet for A3+ or larger, 2 sheets for
smaller than A3+
Touch the following in order from the Home
A
screen.
❏ Roll paper
Roll paper information area - Media Adjust
41
Page 42
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
❏ Cut sheet
Paper Setting - Cut Sheet(1 sheet) - Media Adjust
To u ch Easy Adjustment - Start.
B
Printing of the adjustment patterns starts.
When Print head alignment complete... appears, the procedure is nished.
adjustment results are saved as settings of
e the currently selected paper type.
Note:
A print head nozzle clogging check is performed automatically before adjustment pattern printing. If nozzles are determined to be clogged, cleaning starts and the adjustment patterns will be printed aer cleaning nishes.
Refer to the following when the error message Auto Adjustment is unable to start because there is a problem with the paper or printing status... appears,
or when the adjustment results are not satisfactory.
e adjustment results are saved as settings of the currently selected paper type.
Note:
A print head nozzle clogging check is performed automatically before adjustment pattern printing. If nozzles are determined to be clogged, cleaning starts and the adjustment patterns will be printed aer cleaning nishes.
Refer to the following when the error message Auto Adjustment is unable to start because there is a problem with the paper or printing status... appears,
or when the adjustment results are not satisfactory.
U “e prints are not what you expected” on
page 154

Print Head Alignment (Auto)

e following shows the length and number of sheets of paper used for adjustment pattern printing.
U “e prints are not what you expected” on
page 154

Paper Feed Adjust (Auto)

e following shows the length and number of sheets of paper used for adjustment pattern printing.
❏ Roll paper: Approx. 230 mm
❏ Cut sheet: 1 sheet for A4 or larger
Touch the following in order from the Home
A
screen.
❏ Roll paper
Roll paper information area - Media Adjust
❏ Cut sheet
Paper Setting - Cut Sheet(1 sheet) - Media Adjust
To u ch Paper Feed Adjust - Auto - Start.
B
Printing of the adjustment patterns starts.
When Print head alignment complete... appears, the procedure is
nished.
❏ Roll paper: Approx. 227 mm
❏ Cut sheet: 1 sheet for A4 or larger
Touch the following in order from the Home
A
screen.
❏ Roll paper
Roll paper information area - Media Adjust
❏ Cut sheet
Paper Setting - Cut Sheet(1 sheet) - Media Adjust
To u ch Print Head Alignment - Auto - Start.
B
Printing of the adjustment patterns starts.
When Print head alignment complete... appears, the procedure is nished.
e adjustment results are saved as settings of the currently selected paper type.
Note:
A print head nozzle clogging check is performed automatically before adjustment pattern printing. If nozzles are determined to be clogged, cleaning starts and the adjustment patterns will be printed aer cleaning nishes.
42
Page 43
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
Refer to the following when the error message Auto Adjustment is unable to start because there is a problem with the paper or printing status... appears,
or when the adjustment results are not satisfactory.
U
“e
page 154
prints are not what you expected” on
43
Page 44
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Printing with the Printer Driver from Your Computer

Printing with the
C
Select the printer in Printer and then click Printer Properties.
Printer Driver from Your Computer

Basic Operating Procedures (Windows)

Printing Procedure

is section describes the basic procedure to print various data, including the data of Word, Excel, and PowerPoint of Acrobat, using the printer driver from a computer.
Turn on the printer, and load the paper.
Microso Oce
and PDFs of Adobe
A
U “Loading Roll Paper” on page 28
U “Loading Cut Sheet(1 sheet)” on page 35
When you have created the data in the
B
application, click Print in the File menu.
e printer driver dialog will be displayed.
Note:
When printing a PDF le In the Print dialog box of Adobe Acrobat, select the Actual size (or Page Scaling: None) radial button and Choose paper source by PDF page size check box. To enlarge or reduce the size, congure dialog box.
the setting in the printer driver settings
44
Check Document Size on the Printer Settings
D
tab of the printer driver.
e paper size set in the application is displayed automatically. However, the paper sizes (page sizes) of some applications such as PowerPoint may not be displayed correctly. In such a case, click Settings... and specify the size in the displayed Change Paper Size dialog box.
Page 45
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
If the desired size is not available in the pull-down menu of the Change Paper Size dialog box, click Custom Paper Size... and then set and save a custom size.
U “Printing at Non-Standard Sizes” on
page 61
Set Output Size.
E
To enlarge or reduce the size, select from the pull-down menu below the Document Size.
For Roll Paper Width (Paper Size when cut sheet) and Media Type, the settings in the control panel of the printer are applied automatically.
Note:
If the paper is loaded or changed aer opening the printer driver's dialog box, the paper size and paper type settings congured on the printer will not be applied. In this case, click the Acquire Info button to apply the settings.
congured
See the following for more details on enlargement settings.
U “Enlargements and Horizontal and Vertical
Banners” on page 56
Select Source and check the roll paper width
F
(paper size when cut sheet) and paper type.
Select from Roll Paper and Sheet. If you select a paper source for which paper is not loaded in the printer,
appears.
Select Select Target in Print Quality.
G
Choose an option according to the type of document and how it will be used.
To set the color correction method or color balance in detail to match your preferences, clear the Simple Settings check box. See the following for more details.
45
U “Correct color and print” on page 69
Page 46
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Check that the Print Preview check box is
H
selected and then click OK.
If a preview is not necessary, clear the check box and then click OK.
Note:
In the print preview, you can check and change the print settings while viewing the image to be actually printed. We recommend to check with the preview when printing on roll paper or large-sized paper.
Click Print in the Print dialog box of the
I
application.
e print preview screen appears.
Note:
See the printer driver help for more details on setting items. You can display the help in the following two ways:
❏ Click Help at the bottom right of the screen.
❏ Right-click the item you want to check and then
click Help. (is is not possible in the print preview screen.)

Canceling Printing

are a few ways to stop printing operations
ere depending on the situation. When the computer has nished the print job from the computer. Cancel on the printer.
Canceling from a Computer
When the Progress Bar is displayed
Click Cancel.
sending data to the printer, you cannot cancel
Check the print settings in the print preview
J
screen, and if there is no problem, click Print to start printing.
icons and menus at the top of the preview
e screen allow you to change the image display settings. You can change the print settings using the menus on the right side. See the help for more details.
When the Progress Bar is not displayed
Click the printer icon on the taskbar.
A
Whether or not an icon is displayed depends on the settings selected for Windows.
46
Page 47
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Select the print data you want to cancel and
B
click Cancel in the Document menu.
To cancel all print data, click Cancel All Documents in the Printer menu.
If the job has been sent to the printer, print data is not displayed on the above screen.
Canceling on the printer
Open View devices and printers or Devices
A
and Printers.
Windows 10/8.1/8/7
Click in the following order: Hardware and Sound (or Hardware) > View devices and printers (or Devices and Printers).
Windows Vista
Click in the following order: Hardware and Sound and then Printer.
Windows XP
Click in the following order: Printers and Other Hardware, and then Printers and Faxes.
Note: If your Windows XP Control Panel is in Classic Vie w, click Start, Control Panel, and then Printers and Faxes.
Right-click your printer icon, and click
B
Printing preferences.
e Cancel button is displayed on the control panel screen during printing. Touch the Cancel button. print job is canceled even in the middle of printing. It may take a while before the printer returns to the ready status.
However, print jobs in the print queue on a computer cannot be deleted in this way. Use the procedure of "Canceling from a Computer" to delete print jobs in the print queue.
e

Customizing the Printer Driver

You can save the settings or change the display items as you prefer.
Saving Frequently Used Settings
If you start the printer driver from the Control Panel, change the settings to those you use frequently, and then save the settings, the printer driver's dialog box will be displayed with the saved settings from any application that it is displayed.
C
printer driver setting screen is displayed.
e
47
Page 48
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Make the necessary settings. ese settings become the default settings of the printer driver.
Saving various settings as your Select Settings
You can save all printer driver settings as a Select Setting. is allows you to easily load settings that have been stored in Select Settings, and repeatedly print using exactly the same settings.
Set each item on the Printer Settings, Layout,
A
and Advanced tabs to the settings you want to save as Select Settings.
Click Custom Settings.
B
Note: How to share Select Setting settings with multiple computers
Select the settings you want to share, click Export..., and then export the settings to a le. Display the same screen of the printer driver on another computer, click Import..., and then import the settings.
Rearranging display items
e display items of Select Setting, Media Type, and Paper Size can be arranged as follows to display the
ones you use normally right away.
❏ Hide unnecessary items.
❏ Rearrange in an order of most frequent use.
❏ Arrange in groups (folders).
Click Utility tab - Menu Arrangement.
A
Enter the desired name in Name, and then click
C
Save.
You can save up to 100. e saved select settings can be recalled from Select Setting.
Select Edit Item.
B
48
Page 49
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Change the display order and groups in List.
C
❏ You can move and order items by dragging
and dropping.
❏ To add a new group (folder), click Add
Group....
❏ To delete a group (folder), click Delete
Group.
❏ Drag and drop unnecessary items to Not
Display.
D
Note:
When Delete Group is performed, the group (folder) is deleted, but the settings in the deleted group (folder) remain. Delete them individually from List in the save location.
Click Save.
49
Page 50
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Basic Operating Procedures (Mac)

Printing Procedure

section describes the basic procedure to print
is using the printer driver from a computer.
Basic Printing Procedure
Turn on the printer, and load the paper.
A
U “Loading Roll Paper” on page 28
U “Loading Cut Sheet(1 sheet)” on page 35
When you have created the data in the
B
application, click Print in the File menu.
Note:
If page settings are not displayed in the print dialog, click the "page settings" option (e.g., Page Setup) in the File menu.
Check that this printer is selected, and then set
D
the paper size.
Paper size settings set items including paper size, borderless methods, and paper source.
Click Show Details (or ) at the bottom of
C
the screen.
Select Printer Settings from the list and set
E
Output Size.
If Printer Settings is not displayed in the list, the dedicated printer driver for this printer has not been added. See the following and then add the printer driver.
U “How to Select the Dedicated Printer
Driver for is Printer” on page 52
50
Page 51
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
To enlarge or reduce the size, select from the pull-down menu below the Paper Size.
See the following for more details on enlargement settings.
U “Enlargements and Horizontal and Vertical
Banners” on page 56
To set the color correction method or color balance in detail to match your preferences, clear the Simple Settings check box. See the following for more details.
U “Correct color and print” on page 69
Check that the Print Preview check box is
G
selected and then click Print.
If a preview is not necessary, clear the check box and then click Print.
Note:
In the print preview, you can check and change the print settings while viewing the image to be actually printed. We recommend to check with the preview when printing on roll paper or large-sized paper.
Select Select Target in Print Quality.
F
Choose an option according to the type of document and how it will be used.
Check the print settings in the print preview
H
screen, and if there is no problem, click Print to start printing.
e icons and menus at the top of the preview screen allow you to change the image display settings. You can change the print settings using the menus on the right side. See the help for more details.
51
Page 52
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Note:
See the printer driver help for more details on setting items. Click to display Help.
in the printer driver settings dialog box
How to Select the Dedicated Printer Driver for This Printer
You can print using AirPrint from a Mac computer. However, printing by automatically document to the width of the roll paper and selecting a print quality suitable for the print target are not possible. If the menus described in the previous section "Basic Printing Procedure" are not displayed, select the dedicated printer driver for the printer in Printer. e dedicated printer driver for this printer is displayed as follows.
❏ When USB connection
EPSON SC-TXXXX
❏ When network connection
EPSON TXXXX or EPSON TXXXX-YYYYYY
*: "XXXX" is the product model number. "YYYYYY" is the last
six digits of the MAC address.
If the dedicated printer driver for this printer is not displayed in the list, add it with the following procedure.
Select System Preferences - Printers &
A
Scanners (or Print & Scan / Print & Fax) from the Apple menu.
tting
the
Canceling from a Computer
Click the icon of this printer in the Dock.
A
Select the job you want to cancel, and then click
B
Delete.
If the job has been sent to the printer, print data is not displayed on the above screen.
Canceling on the printer
Cancel button is displayed on the control panel
e screen during printing. Touch the Cancel button. e print job is canceled even in the middle of printing. It may take a while before the printer returns to the ready status.
However, print jobs in the print queue on a computer cannot be deleted in this way. Use the procedure of "Canceling from a Computer" to delete print jobs in the print queue.
Click [+] and select Add Printer or Scanner.
B
When the list of devices appears, select the
C
dedicated printer driver for this printer and click Add.

Canceling Printing

ere are a few ways to stop printing operations depending on the situation. When the computer has nished the print job from the computer. Cancel on the printer.
sending data to the printer, you cannot cancel

Customizing the Printer Driver

You can assign a name to frequently used setting information (paper size and each item of the basic settings) and then save the information to Presets. is allows you to easily load settings and repeatedly print using exactly the same settings.
Saving Frequently Used Settings as Preset
Set each item on the Paper Size and Printer
A
Settings tabs to the settings you want to save as Presets.
52
Page 53
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Click Save Current Settings as Preset in
B
Presets.
Enter a name, and then click OK.
C
Note: When All printers is selected from Preset Available For, you can select the saved Presets
from all printer drivers installed on your computer.
Select the setting you want to delete, click
B
Delete, and then click OK.
settings are saved to Presets. You can then
e select the settings you saved from Presets.
Deleting from Presets
Click Show Presets... in Presets of the Print
A
dialog box.
53
Page 54
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Printing CAD Drawings

ere are the following two methods to print CAD drawings.
Printing with the printer driver
is method is best suited for printing CAD drawings such as the appearance views of buildings at high quality. using the printer driver from AutoCAD 2018.
section describes the procedure to print
is
Open the data to be printed and then click Plot.
A
Select the printer in Printer/plotter and then
B
click Properties.
Important:
c
If lines or parts in your drawing are not printed properly, print using the HP-GL/2 or HP RTL mode.
Printing using the HP-GL/2 or HP RTL mode
is method is best suited for printing CAD and GIS drawings such as maps and blueprints.
You can print from an application that supports HP-GL/2 (compatible with HP Designjet 750C) and HP RTL. See the following for more details.
Click Custom Properties.
C
U “Printing Using the HP-GL/2 or HP RTL Mode
from a Computer” on page 90
e printer driver's dialog box for this printer appears.
54
Page 55
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Set Output Size and Source in the printer driver.
D
U “Basic Operating Procedures (Windows)”
on page 44
U “Basic Operating Procedures (Mac)” on
page 50
Select CAD/Line Drawing - Black, CAD/Line
E
Drawing - Color, or CAD/Line Drawing ­Bi-Level from the Select Target list.
Windows
Check other settings, and then start printing.
F
Note:
If the output size is portrait and the height is smaller than the width of the roll paper, the print image is printed rotated 90° to save paper. function is enabled if the Auto Rotate check box is selected in Roll Paper Option on the Advanced tab.
is
Mac
55
Page 56
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Enlargements and Horizontal and Vertical Banners

e printer driver can enlarge or reduce documents for
dierent
methods.
Before printing at non-standard sizes, including vertical or horizontal banners and documents with equal sides, enter the desired paper size in the printer driver.
U “Printing at Non-Standard Sizes” on page 61
❏ Fit to Roll Paper Width
Automatically enlarges or reduces the image size to t the roll paper width.
paper sizes.
are three setting
ere
❏ Specify Size
You can specify the enlargement or reduction ratio. Use this method for a non-standard paper size.
Note:
❏ When printing from applications designed
expressly for horizontal or vertical banners, adjust printer driver settings as described in the application documentation.
❏ When using a Windows application designed for
banners, select Print Banner on the Layout tab if necessary.
❏ Fit to Output Size
Automatically enlarges or reduces the image size to t the paper size.
56
Page 57
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Fitting Documents to the Width of the Roll Paper

Check the document size (or paper size) setting
A
on the Printer Settings tab of the printer driver.
Windows
Display the Printer Settings tab of the printer driver from the application and check that the document size is the same as the setting of the application.
If the size is dierent, select the correct size from the pull-down menu.
U “Basic Operating Procedures (Mac)” on
page 50
Note:
In the case of an application without a page setup menu item, you can set the paper size if you open the Print dialog box from the Print menu item.
Click Fit to Roll Paper Width on the Printer
B
Settings tab of the printer driver and select either Fit Short Side to Roll Paper Width or
Fit Long Side to Roll Paper Width.
Windows
If it correct size in the Change Paper Size dialog box.
U “Basic Operating Procedures (Windows)”
on page 44
Mac
Open the page setup screen of the application and check that this printer is selected in Printer and check the paper size.
Select a paper size that does not have (Retain Scale) or (Roll Paper Banner).
click Settings... and specify the
diers,
Mac
57
Page 58
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Fit Short Side to Roll Paper Width
Select this when you want to print with the print image enlarged to the maximum size for the loaded roll paper.
Fit Long Side to Roll Paper Width
Select this when you want to print with the print image enlarged as much as possible to the extent that paper will not be wasted.

Fitting Documents to the Output Size

Check the document size (or paper size) setting
A
on the Printer Settings tab of the printer driver.
Windows
Display the Printer Settings tab of the printer driver from the application and check that the document size is the same as the setting of the application.
Check other settings, and then start printing.
C
If it correct size in the Change Paper Size dialog box.
U “Basic Operating Procedures (Windows)”
on page 44
Mac
Open the page setup screen of the application and check that this printer is selected in Printer and check the paper size.
Select a paper size that does not have (Retain Scale) or (Roll Paper Banner).
click Settings... and specify the
diers,
58
Page 59
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
If the size is dierent, select the correct size from the pull-down menu.
U “Basic Operating Procedures (Mac)” on
page 50
Select Fit to Output Size on the Printer Settings
B
tab of the printer driver.
Windows
Select the desired size from the Output Size
C
pull-down menu.
Windows
Mac
Mac
Check other settings, and then start printing.
D
59
Page 60
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Choosing a Print Size

Check the document size (or paper size) setting
A
on the Printer Settings tab of the printer driver.
Windows
Display the Printer Settings tab of the printer driver from the application and check that the document size is the same as the setting of the application.
U “Basic Operating Procedures (Mac)” on
page 50
Note:
In the case of an application without a page setup menu item, you can set the paper size if you open the Print dialog box from the Print menu item.
Display the Output Size input screen from the
B
Printer Settings tab of the printer driver.
Windows
Select Others... and then select Specify Size in the displayed Output Size dialog box.
If it correct size in the Change Paper Size dialog box.
U “Basic Operating Procedures (Windows)”
on page 44
Mac
Open the page setup screen of the application and check that this printer is selected in Printer and check the paper size.
Select a paper size that does not have (Retain Scale) or (Roll Paper Banner).
click Settings... and specify the
diers,
Mac
Select Specify Size.
If the size is dierent, select the correct size from the pull-down menu.
60
Page 61
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Select the size
C
Width, Length, and Scale to and then enter the setting value.
e print image is enlarged or reduced so that it becomes the specied width, length, or scale while maintaining the aspect ratio of the print data.
Windows
Mac
specication
method from

Printing at Non-Standard Sizes

Before printing at non-standard sizes, including vertical or horizontal banners and documents with equal sides, save the desired paper size in the printer driver. Once they have been saved in the printer driver, custom sizes can be selected in the application Page Setup and other print dialogs.
e following sizes can be used.
Paper Width
SC-T5400 Series 89 to 914 mm
SC-T3400 Series / SC-T3400N Series
89 to 610 mm
Check other settings, and then start printing.
D
Paper
*
Length
*: The paper length can be longer when using an application
that supports banner printing. However, the actual print size depends on the application, the paper size loaded in the printer, and the computer environment.
Important:
c
❏ e smallest size supported by the printer is 89
mm wide × 127 mm long. When a smaller size than this is set in Custom Paper Size... of the printer driver, trim the unnecessary margins.
❏ For Custom Paper Sizes of a Mac, although
you can specify a large paper size which cannot be loaded in this printer, it will not be printed properly.
❏ e available output size is limited depending
on the application.
127 to 18000 mm
61
Page 62
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Settings in Windows
Display the Printer Settings tab of the printer
A
driver from the application and then click
Custom Paper Size....
e User-Dened Paper Size dialog box appears.
Set the paper size to use in the User-Dened
B
Paper Size dialog box and then click Save.
Note:
❏ To change the paper size you saved, select the
paper size name from the list on the le.
❏ To delete a saved paper size, select the paper
size name from the list on the le of the screen and then click Delete.
❏ You can save up to 100 paper sizes.
Click OK to close the
C
dialog box. Also close the printer driver's dialog box.
Registration of the user-dened size is now complete.
Select the registered paper size in, for example,
D
the page size settings of the application and then create the data.
Note:
If the registered paper size is not displayed in the application, check whether it exceeds the sizes supported by the application.
User-Dened
Paper Size
❏ e Paper Size Name is displayed as an
document size or output size option. Set a meaningful name such as "400x500mm" or "Horizontal Banner".
❏ To view t h e Paper Width and Paper Height
values for a standard size close to the desired custom size, select the appropriate option in Base Paper Size.
❏ If you select an aspect ratio in Fix Aspect
Ratio and select Landscape or Portrait for Base, you can set the size by just entering a
value in either Paper Width or Paper Height.
When you have
E
display the Printer Settings tab of the printer driver from the Print dialog box.
e registered paper size is displayed in Paper Size on the Printer Settings tab.
U “Basic Operating Procedures (Windows)”
on page 44
Check other settings, and then start printing.
nished
creating the data,
F
62
Page 63
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Settings in Mac
Open the page setup screen of the application
A
and check that this printer is selected in Printer and then select Manage Custom Sizes from Paper Size.
U “Basic Operating Procedures (Mac)” on
page 50
Enter values in Width and Height of the Paper
C
Size, enter the margins, and then click OK.
e ranges of page sizes and margin sizes that can be specied dier depending on your printer model and the settings on the printer.
U “Printable area” on page 178
Note:
❏ To edit a saved custom size, choose its name
from the list on the le.
Note:
In the case of an application without a page setup menu item, the paper size settings can be displayed by opening the Print dialog box from the Print menu item.
Click + and then enter the paper size name.
B
❏ To duplicate a saved paper size, select its
name from the list on the le of the screen and click Duplicate.
❏ To delete a saved paper size, select its name
from the list on the le of the screen and click
-.
❏ e custom paper size setting diers
depending on the operating system version. See your operating system's documentation for details.
Click OK to close the Custom Paper Sizes
D
dialog box. Also close the printer driver's dialog box by clicking Cancel.
Registration of the custom paper size is now complete.
Select the registered paper size in, for example,
E
the page size settings of the application and then create the data.
63
Note:
If the registered paper size is not displayed in the application, check whether it exceeds the sizes supported by the application.
Page 64
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
When you have
F
display the Printer Settings tab of the printer driver from the Print dialog box.
e registered paper size is displayed in Document Size on the Printer Settings tab.
U “Basic Operating Procedures (Mac)” on
page 50
Check other settings, and then start printing.
nished
creating the data,
G
64
Page 65
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Borderless Printing

You can print your data without margins on the paper.
e types of borderless printing you can choose vary as shown below depending on the media type.
Roll Paper: No margins for all edges, no margins for the le and right
Cut Sheets: No margins for the le and right only
When printing borderless for all edges, you can also congure
U “About Roll Paper Cutting” on page 66
When performing le and right borderless printing, margins appear on the top and bottom of the paper.
Top and bottom margin values U “Printable area” on
page 178
the cutting operation.
❏ Retain Size
Create the print data larger than the paper size in the applications to produce borderless output. printer driver does not enlarge the image data. Use settings such as Page Setup in the applications to set the size of the image data as follows.
• Create print data larger than its actual print size by 3 mm on the
• If the application has margin settings, set the margins to 0 mm.
• Make the image data as large as the paper size.
Select this setting if you want to avoid image enlargement by the printer driver.
and right (6 mm in total).
le
e

Types of Borderless Printing Methods

You can perform borderless printing using the following two methods.
❏ Auto Expand
e printer driver enlarges the print data to a size slightly larger than the paper size and prints the enlarged image. e sections which are beyond the paper edges are not printed; therefore, resulting in borderless printing. Use settings such as Page Setup in the applications to set the size of the image data as follows.
• Match the paper size and page setting for the print data.
• If the application has margin settings, set the margins to 0 mm.
• Make the image data as large as the paper size.

Supported Paper

Depending on the media type and size, the print quality may decline or borderless printing cannot be selected.
U “Epson Special Media Table” on page 171
U “Supported Commercially Available Paper” on
page 175
65
Page 66
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

About Roll Paper Cutting

When performing borderless printing on roll paper, you can specify whether it is le and right borderless printing or all edges borderless printing, and how to cut the paper in the printer driver's Roll Paper Option. e cutting operation for each value is shown in the following chart.
Printer driver
settings
Cutting
Operation
Explanation
Borderless Single Cut Double Cut
The default printer driver setting is Borderless.
❏ The top area may become
slightly uneven depending on the image since the print operation stops while cutting the top edge of the roll paper.
❏ When you print one page
only or print one page multiple times, the operation is the same as that for Double Cut. When continuously printing multiple sheets, the printer cuts 1 mm inside on the top edge of the rst page and the bottom edge of the subsequent pages to avoid showing margins.
❏ The top area may become
slightly uneven depending on the image since the print operation stops while cutting the top edge of the roll paper.
❏ The printed paper is
approximately 2 mm shorter than the specied size since the printer cuts the paper inside the image to avoid showing top and bottom margins.
❏ After cutting the bottom
edge of the previous page, the printer feeds the paper, and then cuts the top edge of the following page. Although this produces 60 to 127 mm cut-o pieces, the cut is more accurate.
66
Page 67
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Setting Procedures for Printing

Settings in Windows
Display the printer driver's Printer Settings tab
A
and adjust the following settings.
U “Basic Operating Procedures (Windows)”
on page 44
For Borderless settings, select from Auto
C
Expand or Retain Size.
If Auto Expand is selected, select the amount of enlargement from the following.
Max : 3 mm for le and 5 mm for right
(the image shis 1 mm to the right)
Select Borderless.
B
Standard : 3 mm for le and right
Min : 1.5mm for le and right
Note:
Moving the slider towards Min decreases the image enlargement ratio. erefore, some margins may appear at the edges of the paper depending on the paper and printing environment.
67
When printing on roll paper, select the
D
Advanced tab, and setting in the Roll Paper Option area.
U “About Roll Paper Cutting” on page 66
congure
the Auto Cut
Page 68
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Check other settings, and then start printing.
E
Settings in Mac
Open the Print screen and select the paper size
A
from the Paper Size option, and then select a borderless printing method.
U “Basic Operating Procedures (Mac)” on
page 50
e selections for borderless printing methods are displayed as shown below.
xxxx (Roll Paper - Borderless, Auto Expand)
xxxx (Roll Paper - Borderless, Retain Size)
xxxx (Roll Paper - Borderless, Banner)
xxxx (Sheet - Borderless, Auto Expand)
xxxx (Sheet - Borderless, Retain Size)
Paper size such as A4 will be displayed in xxxx.
Standard : 3 mm for le and right
Min : 1.5mm for
Note:
Moving the slider towards Min decreases the image enlargement ratio. erefore, some margins may appear at the edges of the paper depending on the paper and printing environment.
When printing on roll paper, select Advanced
C
from the list, and choose an Auto Cut option.
and right
le
Note:
If page setting options are not available in the application's print dialog, display the page settings dialog.
If Auto Expand is selected for paper size, select
B
Advanced from the list, and click Expansion.
You can only select Expansion if Auto Expand is selected in Paper Size. e expansion values for each of the settings are as follows.
Max : 3 mm for le and 5 mm for right
(the image right)
1 mm to the
shis
Check other settings, and then start printing.
D
68
Page 69
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Correct color and print

e optimal method is selected from the following color correction methods for each print target in the print quality settings of the printer driver.
❏ EPSON Standard (sRGB)
Optimizes the sRGB space and corrects the color.
❏ Business Graphics
Performs color correction to sharpen your images based on the sRGB space.
❏ Line Drawing
Optimizes color correction for line drawing by processing the border between lines and the background as discontinuous.
❏ GIS
Performs the optimal printing for topographic maps and other data of the geographic information system (GIS).
❏ ICM
Performs color management to match the colors in the image data to those in the printed output (Windows only).
U “Color Management Printing” on page 73
❏
(No Color Adjustment)
O Color correction is not performed by the printer driver. Choose if color management is performed by the application.
U “Color Management Printing” on page 73
If you clear the Simple Settings check box, you can check which of the above color correction methods is used. Standard of Select Target is the most suitable setting for the currently selected paper type.
Clicking the Settings button allows you to, for example, Contrast, Saturation, and color balance.
Use this option when the application in use does not have a color correction function.
Note:
e color correction options available vary with the operating system and the type of paper used.
If you want to select the color correction method yourself, select Custom at the very bottom of the print target list.
adjust the Gamma, Brightness,
nely
Settings in Windows
When using applications featuring a color
A
management function, specify how to adjust colors from these applications.
When using applications without a color management function, start from Step 2.
Depending on the type of the application, make the settings following the table below.
Adobe Photoshop CS3 or later Adobe Photoshop Elements 6 or later Adobe Photoshop Lightroom 1 or later
69
Page 70
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
OS Color Management
Settings
Windows 10,
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
Windows XP (Service Pack 2 or later and .NET 3.0 or later)
Windows XP (other than the above)
In other applications, set No Color Management.
Note:
For information on supported platforms, see the website for the application in question.
Printer Manages Colors
No Color Management
Display the Printer Settings tab of the printer
B
driver and then clear the Simple Settings check box in the Print Quality area.
U “Basic Operating Procedures (Windows)”
on page 44
Select the print target. If you want to select the
C
color correction method yourself, select Custom at the very bottom of the list.
When Custom is selected for the print target,
D
select the color and color correction method settings.
Setting example of Adobe Photoshop CC
Open the Print dialog box.
Select Color Management, then select Printer
Manages Colors in Color Handling, and click Print.
70
Page 71
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
If necessary, click Settings and then adjust
E
items such as the Gamma, Brightness, Contrast, Saturation, and color balance.
See the printer driver help for more details on each item.
Note:
You can adjust the correction value by checking the sample image on the le side of the screen. Furthermore, you can select Color Circle or Slide Bar of Color Adjustment Method and nely adjust the color balance.
Settings example of Adobe Photoshop CC
Open the Print dialog box.
Select Color Management, then select Printer
Manages Colors in Color Handling, and click Print.
Display the Print screen.
B
U “Basic Operating Procedures (Mac)” on
page 50
Select Color Matching from the list, and then
C
click EPSON Color Controls.
Check other settings, and then start printing.
F
Settings in Mac
When using applications featuring a color
A
management function, specify how to adjust colors from these applications.
When using applications without a color management function, start from Step 2.
When using the following applications, set the color management setting to Printer Manages Colors.
Adobe Photoshop CS3 or later Adobe Photoshop Elements 6 or later Adobe Photoshop Lightroom 1 or later
In other applications, set No Color Management.
Note:
For information on supported platforms, see the website for the application in question.
Note: EPSON Color Controls will not be available in
the following applications if Step 1 is omitted.
❏ Adobe Photoshop CS3 or later
❏ Adobe Photoshop Lightroom 1 or later
❏ Adobe Photoshop Elements 6 or later
71
Page 72
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Select Printer Settings from the list and then
D
clear the Simple Settings check box in the Print Quality area.
If necessary, click Settings and then adjust
G
items such as the Gamma, Brightness, Contrast, Saturation, and color balance.
See the printer driver help for more details on each item.
Select the print target. If you want to select the
E
color correction method yourself, select Custom at the very bottom of the list.
When Custom is selected for the print target,
F
select the color and color correction method settings.
Check other settings, and then start printing.
H
72
Page 73
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Color Management Printing

About Color Management

Even when using the same image data, the original image and the displayed image may look the printed results may look dierent to the image you see on the display. characteristics when input devices such as scanners and digital cameras capture colors as electronic data, and when output devices such as display screens and printers reproduce colors from the color data. e color management system is a means to adjust dierences in color conversion characteristics among input and output devices. A color management system is included with operating systems such as Windows and Mac OS, in addition to image processing applications. Windows and Mac OS X include the ICM and ColorSync color management systems, respectively.
occurs due to the
is
dierent,
dierence
and
in

Color Management Print Settings

You can perform color management printing using this printer's printer driver in the following two ways.
Choose the best method according to the application you are using, the operating system environment, the aim of the print out, and so on.
Setting color management with the applications
method is for printing from applications that
is support color management. All color management processes are carried out by the application's color management system. want to obtain the same color management print results using a common application among dierent operating system environments.
U “Setting color management with the applications”
on page 74
Setting color management with the printer driver
method is useful when you
is
In a color management system, a color denition le called a "Prole" is used to perform color matching between devices. (is le is also called an ICC prole.) e prole of an input device is called an input prole (or source prole), and the prole of an output device, such as a printer, is called a printer prole (or output prole). A prole is prepared for each media type in this printer's driver.
e color conversion areas by the input device and the color reproduction area by the output device a result, there are color areas that do not match even when performing color matching using a prole. In addition to specifying system also species conversion conditions for areas where color matching failed as "intent". e name and type of intent vary depending on the color management system you are using.
You cannot match the colors on the printed results and display by color management between the input device and the printer. To match both colors, you need to perform color management between the input device and the display as well.
proles,
the color management
dier.
As
e printer driver uses the operating system's color management system and carries out all color management processes. You can management settings in the printer driver using the following two methods.
❏ Host ICM (Windows) / ColorSync (Mac OS X)
Set when printing from applications that support color management. is is eective in producing similar print results from dierent applications under the same operating systems.
U “Color Management Printing by Host ICM
(Windows)” on page 76
U “Color Management Printing by ColorSync
(Mac)” on page 77
❏ Driver ICM (Windows only)
allows you to perform color management
is printing from applications that do not support color management.
U “Color Management Printing by Driver
ICM(Windows Only)” on page 78
congure
the color
73
Page 74
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Setting proles
Settings for the input prole, printer prole, and intent (matching method) vary between three types of color management printing since their color management engines are used dierently. is is because color management usage settings in the printer driver or application as described in the following table.
Input prole settings
Driver ICM (Windows)
Host ICM (Windows)
ColorSync (Mac OS X)
Application Application Application Application
Printer Driver
Application Printer
Application Printer
between the engines. Make
diers
Printer prole settings
Printer Driver
Driver
Driver
Intent settings
Printer Driver
Printer Driver
Application

Setting color management with the applications

Print using applications with a color management function. Make the color management settings in the application and disable the printer driver's color adjustment function.
Make color management settings in the
A
applications.
Settings example of Adobe Photoshop CC
Open the Print dialog box.
Select Color Management, select Photoshop
Manages Colors in Color Handling, select Printer Prole and Rendering Intent, and click Print.
Printer when performing color management are installed with the printer's printer driver. You can select the prole from the printer driver's settings screen.
You can select the prole from the printer driver's settings screen.
U “Color Management Printing by Driver
ICM(Windows Only)” on page 78
U “Color Management Printing by Host ICM
(Windows)” on page 76
U “Color Management Printing by ColorSync
(Mac)” on page 77
U “Setting color management with the applications”
on page 74
proles
for each paper type that is needed
Display the printer driver's settings screen
B
(Windows) or Print screen (Mac).
Make printer driver settings.
For Windows
U “Basic Operating Procedures (Windows)”
on page 44
For Mac
U “Basic Operating Procedures (Mac)” on
page 50
74
Page 75
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Set color management to
C
For Windows
Clear the Simple Settings check box in the Print Quality area of the Printer Settings tab and select O (No Color Adjustment) from the print target list.
o.
For Mac
Select Printer Settings from the list and clear the Simple Settings check box in the Print Quality area, and select O (No Color Adjustment) from the print target list.
Note:
In Windows 7, Windows Vista, and Windows XP (Service Pack 2 or later and .NET 3.0), O (No Color Adjustment) is selected automatically.
Check other settings, and then start printing.
D
75
Page 76
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Setting color management with the printer driver

Color Management Printing by Host ICM (Windows)
Use image data in which an input prole has been embedded. Also, the application must support ICM.
Make the settings for color adjustment using
A
the application.
Depending on the type of the application, make the settings following the table below.
Adobe Photoshop CS3 or later Adobe Photoshop Elements 6.0 or later Adobe Photoshop Lightroom 1 or later
OS Color Management
Settings
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
Windows XP (Service Pack 2 or later and .NET 3.0 or later)
Windows XP (other than the above)
Printer Manages Colors
No Color Management
Settings example of Adobe Photoshop CC
Open the Print dialog box.
Select Color Management, then select Printer
Manages Colors in Color Handling, and click Print.
When using an application without a color management function, start from step 2.
Clear the Simple Settings check box in the
B
Print Quality area on the Printer Settings tab of the printer driver and then select ICM from the Select Target list.
U “Basic Operating Procedures (Windows)”
on page 44
In other applications, set No Color Management.
Note:
For information on supported platforms, see the website for the application in question.
76
Page 77
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Click Settings.
C
Select Host ICM in ICM Mode.
D
See the printer driver help for more details.
printer
e
*
Type
selected on the Printer Settings tab is set automatically and is displayed in the Printer Prole Description area.
corresponding to the Media
prole
Color Management Printing by ColorSync (Mac)
Use image data in which an input embedded. Also, the application must support ColorSync.
Note:
Depending on the application, color management printing by ColorSync may not be supported.
Disable the color management functions in the
A
application.
Display the Print screen.
prole
has been
B
U “Basic Operating Procedures (Mac)” on
page 50
Select Color Matching from the list, and then
C
click ColorSync.
To change the prole, select the Show all proles check box.
*: If Source is selected on the Printer Settings tab, the paper type set on the printer is set automatically. Media Type becomes Use Printer Settings, and the paper type name is displayed on the right side.
printer
e currently selected paper type
automatically and displayed at the bottom of the prole area. To change the prole, select the desired prole from the Prole pull-down menu.
*: It is set in the screen displayed by selecting Printer Settings from the list. If Paper Source is selected, the paper type set on the printer is set automatically, and Use Printer Settings is displayed. e paper type name is displayed on the right side of it.
corresponding to the
prole
*
is specied
Check other settings, and then start printing.
E
Check other settings, and then start printing.
D
77
Page 78
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Color Management Printing by Driver ICM (Windows Only)
e printer driver uses its own printer proles to perform color management. You can use the following two color correction methods.
❏ Driver ICM (Basic)
Specify one type of prole and intent for processing the entire image data.
❏ Driver ICM (Advanced)
e printer driver distinguishes the image data into the Image, Graphics, and Te x t areas. Specify a
dierent prole
areas.
When using applications featuring a color management function
Make the settings for color processing using the application before making printer driver settings.
Depending on the type of the application, make the settings following the table below.
and intent for each of the three
Open the Print dialog box.
Select Color Management, then select Printer Manages Colors in Color Handling, and click Print.
Clear the Simple Settings check box in the
A
Print Quality area on the Printer Settings tab of the printer driver and then select ICM from the Select Target list.
Adobe Photoshop CS3 or later Adobe Photoshop Elements 6.0 or later Adobe Photoshop Lightroom 1 or later
OS Color Management
Settings
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
Windows XP (Service Pack 2 or later and .NET 3.0 or later)
Windows XP (other than the above)
In other applications, set No Color Management.
Note:
For information on supported platforms, see the website for the application in question.
Printer Manages Colors
No Color Management
U “Basic Operating Procedures (Windows)”
on page 44
Settings example of Adobe Photoshop CC
78
Page 79
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Click Settings.
B
Select Driver ICM (Basic) or Driver ICM
C
(Advanced) in ICM Mode of the ICM dialog box.
Intent Explanation
Relative Colorimetric
Absolute Colorimetric
Converts the data so that a set of color gamut and white point (or color temperature) coordinates in the original data match their corresponding print coordinates. This feature is used for many types of color matching.
Assigns absolute color gamut coordinates to the original and print data and converts the data. Therefore, color tone adjustment is not performed on any white point (or color temperature) for the original or print data. This feature is used for special purposes such as logo color printing.
Check other settings, and then start printing.
D
If you select Driver ICM (Advanced), you can specify the prole and intent for each of image data such as photos, graphics data, and text data.
Intent Explanation
Saturation Keeps the current saturation
unchanged and converts the data.
Perceptual Converts the data so that a
more visually natural image is produced. This feature is used when a wider gamut of color is used for image data.
79
Page 80
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Multi-Page Printing (N-up)
Two or four consecutive pages can be printed on a single sheet.
Note:
❏ In Windows, you cannot use the multi-page
printing function when performing borderless printing.
Settings in Windows
Display the Layout tab of the printer driver and
A
select the Page Layout check box. en, select N-up and click the Settings button.
U “Basic Operating Procedures (Windows)”
on page 44
❏ In Windows, you can use the Reduce/Enlarge
function (Fit to Page) to print the data on dierent sizes of paper.
U “Printing at Non-Standard Sizes” on page 61
Set Number of pages per sheet and Page
B
Order in the Print Layout dialog box.
If the Print page frames check box is selected, page frames are printed on each page.
Check other settings, and then start printing.
C
80
Page 81
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Settings in Mac
Display the Print dialog box, select Layout from
A
the list, and specify the number of pages per sheet and so on.
U “Basic Operating Procedures (Mac)” on
page 50

Folded 2-Sided Printing (Windows only)

Two consecutive pages can be printed on a single sheet. e second page is ipped 180° and printed adjacent to the folded to make a 2-sided document.
Display the Layout tab of the printer driver and
A
select the Page Layout check box. Folded Double-Side and click the Settings...
button.
page, allowing the paper to be
rst
en,
select
Note:
You can print frames around arranged pages using the Border function.
Check other settings, and then start printing.
B
U “Basic Operating Procedures (Windows)”
on page 44
81
Page 82
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Set Binding Edge and Binding Margin in the
B
Folded Double-Side Setting dialog box.
Check other settings, and then start printing.
C

Poster Printing (Windows Only)

A single page can be printed across multiple sheets. e sheets can then be joined together to form large posters (up to 16 times the original size). If Borderless Poster Print is selected, the sheets can be joined without trimming the margins, but because the portions outside the edges of the paper will be lost using borderless printing, images at the joins may be imperfect.
Display the Layout tab of the printer driver and
A
select the Page Layout check box. Poster and click the Settings... button.
U “Basic Operating Procedures (Windows)”
on page 44
en,
select
82
Page 83
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Set Number of panels in the Poster dialog box.
B
If you want to print marks to serve as a guide
C
when joining together paper printed with poster printing, select the Print Cutting Guides check box.
Note:
❏ If Borderless Poster Print is grayed out, the
selected paper or the size does not support borderless printing.
U “Epson Special Media Table” on
page 171
❏ If Single Cut or Double Cut is selected for
Auto Cut, the paper will be cut 1 or 2 mm
inside the image, resulting in imperfect joins where the images meet.
When with margins is selected:
Clear the Borderless Poster Print check box.
When borderless is selected:
Select Borderless Poster Print.
Note: If Borderless Poster Print is not selected, a Print Cutting Guides option will be displayed.
Overlapping Alignment Marks
Prints guides for joining the paper with overlapping. e the overlapping portions.
Print page frames
Prints frames for joining the paper without overlapping.
nished
size is smaller only for
83
Check other settings, and then start printing.
D
Page 84
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
Joining poster sheets with printed borders
If Overlapping Alignment Marks is selected, join guides (indicated by the lines drawn through and around the X marks in the illustration below) will be printed on each sheet.
Note:
If the output is in color, the join guides will be in blue and the cut guides in red; otherwise, all the guides will be printed in black.
Ready the two top sheets and trim the excess
A
from the le sheet by cutting along the line joining the two join guides (the centers of the X marks).
e following section describes how to join four printed pages together.
Lay the upper
B
sheet. Lineup the X marks as shown in the illustration below, and temporarily fasten them using an adhesive tape on the back.
sheet on top of upper right
le
84
Page 85
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
With the two sheets overlapping, trim the
C
excess by cutting along the line joining the two cut guides (the lines to the
of the X marks).
le
Trim the bottom from the upper sheets by
F
cutting along the line joining the two guides (the lines above the X marks).
Lay the upper sheet on top of the lower sheet.
G
Lineup the X marks as shown in the illustration below, and temporarily fasten them using an adhesive tape on the back.
Rejoin the two sheets.
D
Use an adhesive tape to stick the backs of the sheets together.
Repeat steps 1 to 4 for the lower two sheets.
E
85
Page 86
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
With the two sheets overlapping, trim the
H
excess by cutting along the line joining the two cut guides (the lines above the X marks).
Join the upper and lower sheets together.
I
Use an adhesive tape to stick the backs of the sheets together.
86
Page 87
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
joining all the sheets, trim o the borders
Aer
J
by cutting along the cut guides (outside the X marks).

Printing Multiple Documents (Layout Manager) (Windows Only)

Documents created in dierent applications can be printed together in your choice of layout. is allows you to improve print work eciency and conserve paper.
Sample Multi-Document Layout
Sample Free Vertical/Horizontal Layout
87
Page 88
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Setting Procedures for Printing

Open the
A
application.
Select the Layout Manager check box on the
B
Printer Settings tab of the printer driver and check that the size set in the application is displayed in Document Size.
U “Basic Operating Procedures (Windows)”
on page 44
you want to print in your
le
e overall size and placement of the objects can be changed using the Preferences and Arrangement options in the File menu.
See the Layout Manager screen help for more details on each function.
Click Properties in the File menu and set the
F
print settings in the printer driver dialog box.
Note: Document Size is the size of the document to be
placed on the Layout Manager screen. e actual printing paper size is set in the screen in Step 6.
Click OK. When printing from an application,
C
the Layout Manager screen opens.
e print data is not printed, but one page is placed on the paper of the Layout Manager screen as one object.
Leaving the Layout Manager screen open,
D
repeat steps 1 to 3 until all the print data has been added to the layout.
e objects are added to the Layout Manager screen.
Arrange the objects on the Layout Manager
E
screen.
Objects can be moved or resized by dragging as well as rearranged or rotated using the tool buttons or the options in the Object menu.
Check Media Settings, and set Print Quality.
Click the File menu in the Layout Manager
G
screen, and then click Print.
Printing starts.
88
Page 89
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer

Saving and Recalling Settings

e layout and setting information on the Layout Manager screen can be saved as a le. If you need to close your application in the middle of a job, you can save it to a work.
Saving
Click the File menu on the Layout Manager
A
screen, and then click Save As....
and then open it later to continue your
le
Enter the
B
then click Save.
Close the Layout Manager screen.
name, select the location, and
le
C
Opening saved les
Right-click the printer icon ( ) on the
A
Windows taskbar, and then click Layout Manager in the displayed menu.
e Layout Manager screen appears.
Note: When the printer icon is not displayed on the Windows taskbar
Open the Utility tab of the printer driver and click the Monitoring Preferences. Select the Register the shortcut icon to the taskbar check box in the Monitoring Preferences dialog box.
Click Open in the File menu on the Layout
B
Manager screen.
Select the location and open the required le.
C
89
Page 90
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Printing Using the HP-GL/2 or HP RTL Mode from a Computer

Printing Using the HP-GL/2 or HP RTL Mode from a Computer
e printer can emulate* HP-GL/2 (compatible with HP Designjet 750C) and HP RTL. is section describes the settings of the printer and the settings in the CAD application for printing while emulating.
* Not all functions are supported. If you will use an
untested application, test its output in advance.
For a list of applications that have been tested, visit the Epson website at http://www.epson.com.

Basic Print Settings

To u ch Settings - General Settings - Printer
A
Settings - Universal Print Settings from the Home screen.
Check Paper Source and change the setting if
B
necessary.
e default setting is Roll Paper. When HP-GL/2 or HP RTL print data is sent, an error occurs if paper is not loaded for the paper source set here.
Check the other items and make changes if
C
necessary.
See the following for more details on Universal Print Settings items.
U “General Settings - Printer Settings” on
page 122
Important:
c
printer may not perform as expected if the size
e of the data to be printed is extremely large.
Note:
CAD drawings can also be printed using the CAD/ line drawing mode of the supplied printer driver. We recommend printing from the printer driver when you want to print with better image quality.
U “Printing CAD Drawings” on page 54

Printer Settings

Change the printer settings for printing in the HP-GL/2 or HP RTL mode as necessary in the control panel of the printer. e printer settings include basic print settings such as the paper source and margins (Universal Print Settings) and HP-GL/2 specic settings such as palette settings (HP-GL/2 Unique Settings).
HP-GL/2 Specic Print Settings
If you want to change HP-GL2 specic settings such as rotating print data, merging lines, and changing the Dene Palette set in the application, use the following procedure.
To u ch Settings - General Settings - Printer
A
Settings - HP-GL/2 Unique Settings from the Home screen.
Touch and change the settings of the desired
B
items.
See the following for more details on HP-GL/2 Unique Settings items.
U “General Settings - Printer Settings” on
page 122
90
Page 91
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing Using the HP-GL/2 or HP RTL Mode from a Computer
Note: When HP-GL/2 or HP RTL printing is not performed properly
e printer automatically determines whether normal printing from the printer driver or emulation printing of HP-GL/2 or HP RTL from the sent print data and then switches the print mode accordingly. If mode switching is not performed correctly and printing is not performed properly, congure the setting as follows.
❏ When the computer and printer are connected via
USB Select Settings - General Settings - Printer Settings - Printing Language - USB from the Home screen and then change the setting from Auto to HP-GL/2.
❏ When the computer and printer are connected via
a network Select Settings - General Settings - Printer Settings - Printing Language - Network from the Home screen and then change the setting from Auto to HP-GL/2.
❏ SC-T3400 Series/SC-T3400N Series:
HP Designjet 750C C3195A
To print from the printer driver as usual or HP RTL nishes, return the setting to Auto.
aer
HP-GL/2

CAD Application Settings

Set the output device as follows according to your model. is explanation uses AutoCAD 2018 as an example.
Click Plot.
A
Set the plotter in Printer/plotter.
B
❏ SC-T5400 Series:
HP Designjet 750C C3196A
91
Page 92
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Changing the Network Connection Methods

Changing the
E
Connect your router and the printer with a LAN cable.
Network Connection Methods
e printer can connect to a wired LAN or a wireless LAN. Furthermore, it also supports Wi-Fi Direct (Simple AP) which allows a smart device or other device to directly connect wirelessly with the printer even when there is no wired LAN or wireless LAN environment.
e printer cannot connect to a wired LAN and wireless LAN at the same time. A Wi-Fi Direct connection is possible regardless of whether or not the printer is connected to a network.
is section describes the procedures to use to switch the connection method.
Note:
See the Administrator's Guide (online manual) for details on the network settings.

Switching to Wired LAN

To u ch on the Home screen.
A
Note:
e shape and color of the icon dier depending on the connection status.
U “Home screen operations” on page 13
To u ch Description.
B
To u ch Wired LAN Connection Method.
C
To u ch Start Setup.
D
e process to disable the wireless LAN connection with the access point starts. Wait until the e Wi-Fi connection is disabled... message appears.
See the following for the location of the printer's LAN port.
U “Side (right side)” on page 11

Switching to Wireless LAN

e SSID (network name) and password of the access point to which the printer is to be connected are required. Conrm them in advance. e printer can be connected to a wireless LAN while the LAN cable is still connected.
Note:
If your access point supports WPS (Wi-Fi Protected Setup), the printer can be connected using Push Button Setup(WPS) or PIN Code Setup(WPS) without using an SSID and password.
U “General Settings - Network Settings” on page 134
To u ch on the Home screen.
A
Note:
e shape and color of the icon dier depending on the connection status.
U “Home screen operations” on page 13
To u ch Router.
B
To u ch Start Setup.
C
Details of the wired LAN connection status are displayed.
To u ch Change to Wi-Fi connection., check the
D
displayed message, and touch Ye s .
To u ch Wi-Fi Setup Wizard.
E
Select the desired SSID.
F
If the desired SSID is not displayed, touch Search Again to update the list. If it is still not displayed, touch Enter Manually and directly enter the SSID.
92
Page 93
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Changing the Network Connection Methods
To u ch Enter Password and enter the password.
G
Note:
❏
Dierentiate
lowercase when entering the password.
❏ If the SSID was entered directly, set Password
to Available before entering the password.
When input is
between uppercase and
nished,
touch OK.
H
Check the settings and then touch Start Setup.
I
To u ch OK to nish the procedure.
J
If the connection fails, select Print Check Report to print a network connection check
report. You can check the measure to take in the report.
Close the Network Connection Settings screen.
K
Directly Connection
To u ch Wi-Fi Direct.
B
When Wi-Fi Direct is already enabled, the network (SSID), password, number of connected devices, etc. are displayed. Proceed to step 5.
Note:
When any of the displayed network (SSID), device name, etc. is partially not visible because it is cut o at the right edge of the screen, touch the corresponding item to display the entire setting value.
To u ch Start Setup.
C
To u ch Start Setup.
D
Wi-Fi Direct is enabled and the network (SSID), password are displayed.
Open the Wi-Fi setting screen on the device
E
you want to connect with the printer, select the SSID displayed on the screen of the printer, and enter the password just as it is displayed on the screen.
Wirelessly (Wi-Fi Direct)
A direct connection with the printer can be established temporarily when, for example, the printer is not connected to a network or you do not have permission to log on to the network.
Wi-Fi Direct is disabled by default. e following describes the procedure from enabling Wi-Fi Direct to connecting.
Note:
e printer can connect with up to four smart devices or computers at the same time. If you want to connect another device when there are already four devices connected, disconnect the connection with the printer from an already connected device.
To u ch on the Home screen.
A
Note:
e shape and color of the icon dier depending on the connection status.
U “Home screen operations” on page 13
When a connection is established, touch Close
F
to
To u ch Close on the screen of the printer to
G
close the network connection settings screen.
When the printer driver is installed on the connected device, you can print using the printer driver.
You can print using AirPrint from a Mac computer or iOS device.
U “Printing Using AirPrint” on page 94
Note:
When you turn o the power of the printer, the connections with connected devices are all disconnected. To re c onne ct the procedure again from step 1.
the procedure.
nish
aer
turning the printer back on, perform
93
Page 94
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Printing Using AirPrint

Printing Using
E
AirPrint
You can easily print wirelessly using AirPrint from an iPhone, iPad, or iPod touch running the latest iOS or from one of the latest Mac computers.
F
is section describes the procedure to print from a smart device.
G
Tap the printer icon or Print.
Note:
e print option is not displayed for an application that does not support AirPrint. Check whether it is supported in the help or other documentation of the application.
Ta p Select Printer and select the printer from the displayed list.
Ta p Print to start printing.
Note:
Printing such as the following is not possible with AirPrint.
❏ Printing by automatically tting the document to
the roll paper width
❏ Printing by automatically enlarging or reducing to
t the output paper size
❏ Setting a print quality suitable for the print target
For such printing, please use the printer driver.
U “How to Select the Dedicated Printer Driver for
Printer” on page 52
is
Connect the smart device and printer via
A
wireless LAN or Wi-Fi Direct.
See the following for more details.
U “Switching to Wireless LAN” on page 92 U “Directly Connection Wirelessly (Wi-Fi
Direct)” on page 93
Load the paper in the printer.
B
Open the document or photo to be printed on
C
your smart device.
Tap the share icon to display the print option.
D
94
Page 95
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Direct Printing of Files on USB Flash Memory

Direct Printing of Files on USB Flash Memory
You can connect your USB ash memory to the printer, and print JPEG and TIFF les stored on the memory directly from the printer.
USB ash memories formatted in FAT and exFAT le systems can be used. However, you cannot use USB ash memories with security functions such as password protected ones.
Connect the USB
A
data to be printed is saved, to the printer.
memory, in which the
ash
Note:
❏ Files other than JPEG or TIFF
displayed on the printer screen.
❏ Any characters in the folder or le names that
cannot be displayed by the printer will be displayed as "?".
Select Black/White or Color.
E
Using advanced settings such as enlarging or reducing size
Proceed to step 6.
Printing at actual size without advanced settings
Proceed to step 7.
Touch t he Advanced tab.
F
Enlarge/reduce settings can be congured in Reduce/Enlarge. If you set Auto Fit Page to On, printing is performed by automatically enlarging to t the width of the roll paper or the size of the cut sheet paper loaded in the printer.
les
are not
To u ch Memory Device on the Home screen.
B
To u ch JPEG or TIFF.
C
To u ch JPEG to display thumbnails of JPEG les.
To u ch TIFF to display a list of TIFF les.
Select one
D
Printing JPEG les
Touch t o s e l ect the touch Proceed to Print. is will add a check mark to the selected image. Touch Single View to enlarge the selected image to display order of les, touch
to print.
le
image to print, then
le
conrm.
To chan ge the
See the following for more details on other settings items.
U “Memory Device menu” on page 141
Note:
If you touch to frequently used print settings and then register them to Presets.
e screen for entering a name can be switched as shown below with the button marked.
Also, each touch of the following bottom le icon switches the input method as follows.
ABC: Enters alphabet letters.
123#: Enters numbers and symbols.
.
(Presets), you can assign a name
Printing TIFF les
From the list, touch a change the display order of les, touch
name to select it. To
le
.
95
Page 96
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Direct Printing of Files on USB Flash Memory
Touch the numeric value for the number of
G
prints and then enter the number of prints in the keypad screen.
Note:
Use the Preview button to conrm the print image.
Touch t he Print button.
H
96
Page 97
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Making Enlarged Copies with an A3 or A4 Scanner

Making Enlarged Copies with an A3 or A4 Scanner
Connecting an Epson A3 or A4 scanner to the printer makes creating enlarged copies a snap; no computer is required.
Supported scanners
❏ DS-530
❏ DS-6500
❏ DS-60000
Check the Epson website for the latest information on supported scanners.

Connecting the Scanner

Ready both the printer and the scanner.
A
For information on setting up the scanner, see the documentation supplied with the scanner.
Turn the printer and scanner o.
B
Connect the scanner to the printer using the
C
USB cable supplied with the scanner.
http://www.epson.com
Supported Sizes
Document Size
5 x 7 inch
Letter
A5
B5
A4
B4
A3
*1 Diers depending on the specications of the scanner to
be connected.
*2 Not supported by SC-T3400 Series/SC-T3400N Series.
*3 89 to 914 mm wide (up to 610 mm for SC-T3400 Series/
SC-T3400N Series)
*1
Output Size
A2
US C (17x22in)
JIS B2
US D (22x34in)
A1
*2
JIS B1
US E (34x44in)
*2
A0
User-Dened
*2
*3
Important:
c
Connect the scanner directly to the printer. Enlarged copies are only available when the scanner is connected directly to the printer.

Making Enlarged Copies

Turn the printer and scanner on.
A
e devices may be turned on in any order.
Load roll paper supported by the enlarged
B
copying function into the printer.
U “Loading Roll Paper” on page 28
Supported paper
Roll paper only. Enlarged copying to cut sheet is not possible.
97
Place the document on the scanner glass or in
C
the auto document feeder (ADF).
U “Placing Documents in the Scanner” on
page 98
Page 98
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Making Enlarged Copies with an A3 or A4 Scanner
For information on using the scanner, see the documentation supplied with the device.
To u ch Enlarged Copy on the Home screen.
D
e enlarged copy dialog box is displayed.
Note:
If Enlarged Copy is not displayed on the Home screen, check the following.
❏ Are the connectors of the USB cable
connecting the printer and scanner inserted
rmly?
❏ Is the power of the scanner on?
❏ Is the scanner a model that supports enlarged
copying?
Select the size of the document loaded in the
E
scanner in Original Size and set the enlargement setting in Reduce/Enlarge.
If you set Auto Fit Page to On, printing is performed by automatically enlarging to t the width of the roll paper loaded in the printer.
Important:
c
e image quality may decline or streaks may appear depending on the document or magnication.
Note:
If you touch to frequently used copy settings and then register them to Presets.
screen for entering a name can be switched as
e shown below with the button marked.
Also, each touch of the following bottom switches the input method as follows.
ABC: Enters alphabet letters.
123#: Enters numbers and symbols.
Touch the numeric value for the number of
F
copies and then enter the number of copies in the keypad screen.
To u ch to start copying.
(Presets), you can assign a name
icon
le
G
Copying can also be started by touching the ] button of the scanner.
Placing Documents in the
If streaks appear, try performing paper adjustment.
U “Optimizing Paper Settings (Media
Adjust)” on page 41
If the problem is not resolved, refer to the scanner manual and then clean the inside of the scanner.
Scanner
Failure to observe the following precautions when placing the original in the scanner may result in reduced print quality or scanning failures.
❏ DS-530 is a scanner that scans both sides
simultaneously but it cannot scan both sides of the document with enlarged copying. Place the side you want copying facing downward in the ADF.
❏ Be sure to insert the original in landscape (wide)
orientation.
98
Page 99
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Making Enlarged Copies with an A3 or A4 Scanner
❏ If there are documents both on the glass and in
the ADF, the document in the ADF will be scanned. Remove documents from the ADF before placing a document on the glass.
❏ e ADF can not be used when:
❏ When JIS B1 or A0 is selected for Reduce/
Enlarge and multiple copies will be made
❏ e original is printed on thick stock (e.g.,
postcards or photographs)
❏ When multiple copies are made from an original
placed on the glass, the original may be scanned once for each copy. Wait until all the copies have been printed before opening the scanner cover.
❏ Use the ADF to scan multi-page documents.
❏ If multiple copies are set for scanning multiple
sheets continuously, the copies will be printed on a page basis as shown below. Example: Order in which pages are output when the printer is used to make two copies of a two page document
99
Page 100
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Using the Menu

Using the Menu

Menu List

e items and options available in the menu are described below. See the reference pages for more details on each item.
Paper Setting
e Paper Setting menu is displayed if paper is loaded.
Details of each item U “Paper Setting menu” on page 112
Settings item Settings value
Roll Paper
Remove Display the removal method
Feed/Cut Paper Backward, Forward, Cut
Media Adjust
Easy Adjustment Start
Paper Feed Adjust
Auto Start
Manual Start
Print length adjustment Start
Print Head Alignment
Auto Start
Manual Start
Advanced Media Setting
Platen Gap 1.2, 1.6, 2.1
(Displayed when in Paper Type, Custom Paper is selected.)
Top/Bottom Margins Standard, Top 3 mm/Bottom 3 mm, Top 15 mm/Bottom 15 mm,
Top 35 mm/Bottom 15 mm
Paper Suction -4 to +3
Back Tension Auto, Standard, High, Extra High
100
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use