Epson Pro L25000U Quick Reference

Download

Page 1

Pro L25000U

Quick Reference

This Quick Reference card gives brief instructions on connecting your

projector and using common features. For details, see the online User’s

Guide.

5BNC-to-VGA cable

VGA-to-component cable

VGA cable

HDMI cable

Ethernet cable

SDI cable

DVI cable

BNC-to-component cable

Page 2

Switching Between Image Sources

Press the Search button (remote control) or one of the source buttons (remote control or projector).

Displaying a Test Pattern

1. Press the Test Pattern button on the projector or remote control.

2. Press the or arrow buttons to change the test pattern.

3. When you’re done, press the Esc button to clear the test pattern.

Changing Screen Type

Set the Screen Type setting to the screen’s aspect ratio.

1. Press the Menu button.

2. Select Extended > Display > Screen > Screen Type.

3. Select the screen’s aspect ratio.

Note: The displayed image should match

the screen’s size and shape.

4. When you’re done, press the Menu button to exit.

Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.

Turning the Projector On

1. Turn on your computer or image source.

2. Remove the lens cover.

3. Press the On button. After the status light stays blue, the projector is ready.

Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide.

4. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.”

Changing the Language of the Projector Menus

The default language of the projector’s menu system is English, but you can change it as necessary.

1. Press the Menu button to access the projector’s menu system.

2. Select Extended > Language.

3. Select your language.

4. When you’re done, press the Menu button to exit.

Adjusting Image Position

1. Press the Lens Shift button on the

2. Press the arrow buttons to adjust

3. When you’re done, press the Esc

Focusing and Zooming

Press the Focus or Zoom buttons on the remote control to adjust the image.

You can also focus and zoom using the projector buttons.

1. Press the Focus/Distortion or

2. Press the or arrow buttons to

3. Press the Esc button to finish the

Page 3

Correcting Image Shape

If your image is uneven on the sides, you can use the projector’s distortion correction features, such as H/V-Keystone and Quick Corner®, to adjust the shape. See the online User’s Guide.

Making Other Image Adjustments

For help on using the projector’s features to improve the image quality, see the online User’s Guide. You can also view information on how to adjust the image color, position, and edges (Edge Blending) when projecting from multiple projectors to create one seamless widescreen image.

Checking Status Information

1. Press the button on the projector to light up the LCD screen.

2. Press the or arrow buttons to view different categories of status information.

3. Press the or arrow buttons to scroll through the information.

Note: See the online User’s Guide for more information.

Turning the Projector Off

Press the Standby button to turn the projector off. If you see a confirmation message, press the Standby button again.

Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the online User’s Guide.

With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.

Adjusting Image Position

1. Press the Lens Shift button on the remote control or projector.

2. Press the arrow buttons to adjust the position of the projected image.

3. When you’re done, press the Esc button to finish the adjustment.

Focusing and Zooming

Press the Focus or Zoom buttons on the remote control to adjust the image.

You can also focus and zoom using the projector buttons.

1. Press the Focus/Distortion or Zoom button on the projector.

2. Press the or arrow buttons to make the adjustment.

3. Press the Esc button to finish the adjustment.

Page 4

Where to Get Help

Manuals

Click the icons on your desktop to access the online manuals (requires an Internet connection). If you don’t have icon links to the manuals, you can install them from the projector CD or go to the Epson website, as described below.

Internet support

You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson.

www.epson.com/support (U.S.) www.epson.ca/support (Canada)

Speak to a support representative

To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday.

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Purchase supplies and accessories

You can purchase an air filter (V13H134A52), screens, and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at

www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Troubleshooting

If you see a blank screen or the message No signal

• Make sure the status light on the

projector is blue and not flashing, and the lens cover is removed.

• Make sure the cables are connected

correctly. See the online User’s Guide.

• You may need to change the image

source. See “Switching Between Image Sources.” Also make sure the source device is turned on.

If the projector and the notebook don’t display the same image

Windows

Press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. You may need to press the keys again to display the image on both devices.

OS X

Open System Preferences and select Displays. Click the Arrangement

tab and select the Mirror Displays checkbox.

Page 5

EPSON, Instant Off, and Quick Corner are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.

OS X is a trademark of Apple Inc., registered in the U.S. and other countries.

HDBase™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

CPD-52087

Printed in XXXXXX

Open menus assigned

by user

Display the Info menu

Correct image distortion

Correct image shape

Display a test pattern

Control one or multiple

projectors

Port to connect remote

control cable

Hold down and use numeric keys to enter numbers

Select color modes

Save and apply presets

Turn the projector off

Turn the projector on

Select a source

Open projector menus

Automatically adjust

computer image

Freeze the image

Navigate through menu

settings; move pointer

Display/hide the on-screen

menus or messages

Select menu settings; left

mouse button

Change the image size

Reset menu settings to their default value

Cancel current operation or return to previous menu; right mouse button

Adjust the focus

Adjust the image position

Switch image sources

Illuminate buttons temporarily

Change the aspect ratio

Temporarily turn off display

Remote Control Map

Page 6