Epson OI-S01 User's Manual

SR-600 Option

FD Drive

OI-S01

User’s Manual

401308901

-1

Caution

No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior
written permission of Seiko Epson Corporation.

The contents of this document are subject to change without notice.
Please contact us for the latest information.

While every precaution has been taken in the preparation of this
document, Seiko Epson Corporation assumes no responsibility for
errors or omissions.

Neither is any liability assumed for damages resulting from the use of
the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the
purchaser of this product or third parties for damages, losses, costs, or
expenses incurred by the purchases or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized
modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation's
operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or
problems arising from the use of any options or any consumable
products other than those designated as Original EPSON Products or
EPSON Approved Products by Seiko Epson Corporation.

EPSON is registered trademarks of Seiko Epson Corporation.

Microsoft, MS, MS-DOS, Windows, and Windows NT are registered
trademarks of Microsoft Corporation.

Copyright 2000 by Seiko Epson Corporation, Nagano, Japan.

0

EMC and Safety Standards Applied

Product Name: OI-S01
Model Name: M176A
The following standards are applied only
to this equipment that are so labeled.
Europe: CE marking

Safety:EN60950

North America:EMI: FCC/ICES-003

Class A

Safety: UL 1950/CSA C22.2

No. 950

Japan: EMC: VCCI Class A

JEIDA-52

Oceania: EMC: AS/NZS 3548

Class A

WARNING

You are cautioned that changes or
modifications not expressly approved by
SEIKO EPSON Corporation could void
your authority to operate the equipment.

This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.

Operation of this equipment in a
residential area is likely to cause harmful
interference, in which case the user will be
required to correct the interference at his
own expense.

FOR CANADIAN USERS

This Class A digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe A est
conforme à la norme NMB-003 du
Canada.

FOR TAIWANESE USERS

CE Marking

This equipment conforms to the following
Directives and Norms:
Directive 89/336/EEC

EN 55022 Class A
EN 55024

IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11

FCC Compliance Statement For
American Users

This equipment has been tested and found
to comply with the limits for a Class A
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.

1

Handling Guidelines

Notes and precautions in this manual are identified by their level of
importance, as defined below.

WARNING

Provides information that must be followed carefully to avoid
bodily injury.

CAUTION

Provides information that must be observed to prevent
damage to the equipment or loss of data.

Handling Guidelines

WARNING

Never disassemble or modify this product.
It may result in injury, or fire.

CAUTION

Turn off the SR-600 to attach or remove the Floppy Disk Drive.

2

Supplied Items

)

Check that the items shown below is contained.

User’s Manual

FDD Unit

Refer the developer’s guide for the attachment guideline.

Specifications

General Specifications

Compliant Floppy Disk : 3.5-inch 720KB, 1.44MB
Interface : Dedicated Interface
Power Supply : +5VDC ± 5% (Provided by SR-600)

Dimensions and Weight

Dimensions
(width) x (length) x (height): 101.5mm x 147mm x 17.2mm
(raised portion and cables not included)
Weight : Approximately 300g

(This document

Environmental Specifications

Temperature (during operation): 5 to 35 Celsius
Temperature (during saving): -10 to 50 Celsius

Humidity (during operation): 30 to 80%RH (no condensation)
Humidity(during saving): 30 to 90%RH (no condensation)

Reliability

MTBF: 30,000 charging time (under normal condition)

3