Epson OI-R01 Installation Manual
Printer Tray
OI-R01
Installation Manual
Copyright© 1997, 1999, 2000 by Seiko Epson Corporation
401045202
Overview
This product is a printer tray which is used as a top cover of the IR series when using the IR series either with an EPSON TM printer or without any printers. The TM printer can be placed on the printer tray.
Unpacking
Please confirm that this package contains these items:
Manual(this sheet) |
|
Screws (2) |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Printer Tray |
DC cable |
1
Mounting the Printer Tray
Mount the printer tray by following the procedure below. If you are not using a TM printer, begin with step 4.
1.Separate the hatched part of the printer tray from the rest of the printer tray. To do that, cut off the two plastic connecting pieces and pull the piece down toward you. Bend it back and forth two or three times, so that you can cut the part off. You can now pass the cable through the new opening.
CAUTION
If burrs are left after the hatched part is removed, you may cut or scratch your fingers. Remove the burrs left on the printer tray with a cutter or file them down.
2
Loading...