NVRAM Board
OI-M06
User’s Manual
Copyright© 2000 by Seiko Epson Corporation
Overview
This product is an optional NVRAM board for the IM-310.
This product has the following features:
❏ Installing in the IM-310 provides NVRAM functions compatible with the IM-
300.
❏ The contents of the 32 KB of SRAM are backed up by the lithium ba tter y in the
IM-310 when power is turned o ff.
❏ Can be used as the hard total for OPOS.
Unpacking
Please confirm that this package contains these items:
NVRAM
Spacers
User’s Manual
401211100
Precautions During Use
❏ This option cannot be installed in the IM-310 when a compact flash card is
installed.
❏ NVRAM contents will be lost when this option is removed from the IM-310.
❏ When used as the hard total with OPOS, select “IM-300” as device class with
the Setup POS utility.
To System Developers
For more detailed information on this product, please refer to the “Developer’s
Guide” provided by EPSON.
General Specifications
On Board Controller
Supported OS
Backup
Environmental conditions
EPSON custom controller
Windows 95/98
Windows NT 4.0
By the IM-310 lithium battery when IM -310 is turned off.
Conforms to the environmental conditions of the IM-
310.
Safety Precautions
This document uses the two headings shown below to call attention to potential
hazards. Failure to observe the information provided under or alongside these
headings may lead to injury or heading damage to your equipment. Be sure that
you understand the meaning of each heading before you proceed.
CAUTION
Failure to observe a CAUTION may result in personal injury, or in damage to
equipment or other property.
CAUTION
❏ Do not spill water or other liquid on this product.
It may lead to trouble.
❏ To avoid generating static electricity and damaging the sound board,
ground yourself by touching a grounded metal surface before you
touch the sound board.
Not allowing static electricity to discharge can cause damage.
❏ Never place object on this product.
The product may be damaged and it may lead to injury.