Epson L1060WNL, L1075UNL, L1075U, L1070W, L1070U User Manual

Pro L1060W/L1060WNL/L1070W/L1070WNL/L1060U/L1060UNL/
L1070U/L1070UNL/L1075U/L1075UNL

Quick Reference

This Quick Reference card gives brief instructions on connecting your

projector and using common features. For details, see the online User’s

Guide.

IMPORTANT: Before using this product, make sure you read these

instructions and the safety instructions in the online User’s Guide.

VGA cable

VGA-to-component cable

Ethernet cable

DVI cable

BNC-to-component cable

HDMI cable

5BNC-to-VGA cable

Stereo mini jack cable

Mini-to-RCA cable

Turning the Projector On

1. Turn on your computer or image
source.

2. Remove the lens cover.

3. Press the On button on the
projector or the remote control.
After the status light stays blue, the
projector is ready.

Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User’s Guide.

On button; just

Switching Between Image Sources

Press the Search button or one of the
source buttons (remote control), or the
Source Search button (projector).

Selecting the Lens Type

Make sure the Lens Type setting is
correct for the lens you are using.

4. If your image does not appear, see
“Switching Between Image Sources”
or “Troubleshooting.”

Changing the Language of the Projector Menus

The default language of the projector’s
menu system is English, but you can
change it as necessary.

1. Press the Menu button to access
the projector’s menu system.

2. Select Extended > Language.

3. Select your language.

4. When you’re done, press the Menu
button to exit.

1. Press the Menu button.

2. Select Extended > Operation >

Advanced > Lens Type.

Note: If the Lens Type setting is greyed

out, the projector has automatically
detected the installed lens and you can
skip the remaining steps.

3. Select the lens you are using.

4. When you’re done, press the Menu
button to exit.

Changing Screen Type

Set the Screen Type setting to the
screen’s aspect ratio.

1. Press the Menu button.

2. Select Extended > Display >
Screen > Screen Type.

3. Select the screen’s aspect ratio.

Note: The displayed image should match
the screen’s size and shape.