Epson NPD4920-00 EN
Hardware Setup Guide
Hardware Setup Guide
Unpacking
Step 1
Remove all protective materials.
Step 2
Close the scanner unit slowly.
Caution; must be followed carefully to avoid bodily injury.
1
Epson NPD4920-00 EN
Hardware Setup Guide
Turning on the Printer
Step 1
Connect the power cable and plug it in.
Step 2
Turn on the printer and raise the control panel.
If an error occurs check that no protective material has been left inside the printer.
Selecting a Lauguage, Country and Time
Go to the printer, and then follow the instructions to select your language, country/region, and time.
2
Epson NPD4920-00 EN
Hardware Setup Guide
Installing Ink Cartridges
Step 1
When instructed to install the cartridges, open the scanner unit.
Do not touch the white flat cable inside the printer.
Step 2
Gently shake only the BLACK (BK) cartridge four or five times. Do not shake Photo Black (PBK) or other color
cartridges. Remove all ink cartridges from their packaging.
❏ For the initial setup, make sure you use the ink cartridges that came with this printer. These cartridges cannot
be saved for later use.
❏ Do not touch the green chip or the small windows on the side of the cartridge.
3
Loading...