EPSON ELP-3000 Data/Video Projector
Data/Video Specifications
General
Type of display
Size of liquid
crystal panels
Resolution
Image size
Projection
distance
Remote control
range
Audio Amp
power
Optical
Aspect ratio
Zoom ratio
Projector Lamp
Poly-si Thin Film Transistor (TFT)
Active Matrix LCD
1.32 inches (33.6 mm)
640 (horizontal) x 480 (vertical) pixels
21 to 300 inches (.5 to 7 meters)
4 to 41 feet (1.2 to 12.4 meters)
33 feet (10 meters)
1W x 1W stereo
4 x 3 (horizontal x vertical)
1:1.4
ring
Height
Width
Depth
Weight
5.9 inches (14.9 cm)
11.2 inches (28.5 cm)
16.3 inches (41.3 cm)
16.98 lb (7.7 kg)
Electrical
Voltage
Rated frequency 50/60 Hz
Fuse type
Power
consumption
100-120VAC and 220-240VAC f 10%
250V, 6.3AT, 5 x 20 mm
220W (50W in standby mode)
VAC
3.5
100
- 120
220-240
VAC
Amps, 50/60 Hz
Amps,
50/60 Hz
1.3
Environmental
Temperature
Humidity
Operation:
Storage: -4”
41”
to
to
104”
F
140’
F (-20’ to
(5”
to
40”
Operation: 20 to 80% RH, non-condensing
Storage: 10 to 90% RH, non-condensing
Supported Monitor Displays
The projector displays images at a resolution of 640 x 480
pixels. When displaying a higher resolution image, the
projector compresses it to 640 x 480.
The following table lists the display formats supported by
the projector.
computer type Formats Resolutions
IBM PC compatible VGA, VESA, NEC,
Apple Macintosh
’
Compressed to 640 x 480
JEGA, CGA
Standard 8- and 24-bit
color monitor
640x480
640x200
640x400
640x350
720x350
720x400’
800x600.
640X480
640x400
C)
60’
C)
Model number
Type
Life
Power
Brightness
MSCR150E3H
Metal halide
Typically 600 hours
150W
250 lumens maximum
Projector Placement Guidelines
The distance between the projector and the screen
determines the actual image size. Use the following general
guidelines to determine the proper distance.
4/95
Maxlmum
300
inches
204
inches
96
inches
60
inches
30
inches 21
Image size
zoom
(25 feet)
(disgonsl)
Minimum zoom
inches (30 feet)
214
inches
146
69 inches
42
Inches
Inches
Distance from screen
(approximate)
40
feet
27 feet
13 feet
8 feet
4 feet
ELP-3000-1
EPSON ELP-3000 Data/Video Projector
Status Lights
The status lights at the top of the projector monitor its
operation.
temperature light 1 power light
lamp light
VGA
and
Monitor connector
pin assignments
The VGA connector is a male video RGB, 15-pin micro-D
style connector, and the Monitor connector is a female video
RGB, Spin micro-D style connector. The pin assignments
for both connectors are as follows:
Gmen
Flaehing gmen
Flaehingmd
ProJector and lamp are on
Projector is receiving a eignal from
the remote control
There is a pmblem with the projector
Pin Assignments
The following tables describe the pin assignments for the
three connectors of the Y-cable: the LCD connector, the VGA
connector, and the Monitor connector. The pin assignments
for the VGA and Monitor connectors are identical.
LCD connector pin assignments
The LCD connector is a 26-pin D-style connector. Its pin
assignments are as follows:
6 RedGND
7 GreenGND
A
Blue GND
14
15 NC
Related Documents
Engineering Change Notices
None.
Technical Information Bulletins
None.
Product Support Bulletins
None.
Related Documentation
4003816
PL-ELP3000
TM-ELP3000
EPSON ELP-3000 Data/Video Projector
Owner’s Manual
EPSON ELP-3000 Data/Video Projector
Parts Price List
EPSON ELP-3000 Data/Video Projector
Service Manual
sync input
Verficel sync input
7 IGreendigRal
Redanalog
9
Blue digital
16
17 Red digital
ELP-3000-2
cable ID
24 GND
15
25
3
4
VGA/no
ID pin
26 Monochrome digital
(Hercules)
video
cable
19
4/95