
Color Laser Printer
Warnings must be followed
carefully to avoid bodily injury.
w
Notes contain information and useful tips on the operation of your printer.
Cautions must be observed to
avoid damage to your equipment.
c
Paper Jam Guide
The illustrations in this manual are of the AcuLaser C3800.
Jam MP C1 A Jam C2 C1 A
1
2
4
Caution:
❏ Do not leave the front cover
c
open for more than five minutes
to avoid exposing the imaging
cartridges to light.
❏ Do not expose the imaging
cartridges to sunlight at all.
When the LCD panel displays the Paper Jam XXX error message, choose the appropriate
description to clear the jammed paper.
For more information, see the Online User’s Guide.
Note:
If the MP tray is open, remove all the paper
and then close the MP tray.
3
1
Caution:
❏ Do not leave the front cover
c
open for more than five minutes
to avoid exposing the imaging
cartridges to light.
2
❏ Do not expose the imaging
cartridges to sunlight at all.
5
4
3

Jam C1 A Jam A D
Note:
If the MP tray is open, remove all the paper
and then close the MP tray.
1
2
3
Caution:
Do not touch the transfer belt and
c
light-sensitive drums to avoid
damaging them.
4
Note:
If the MP tray is open, remove all the paper
and then close the MP tray.
1
Caution:
❏ Do not leave the front cover open
c
for more than five minutes to
avoid exposing the imaging
cartridges to light.
❏ Do not expose the imaging
cartridges to sunlight at all.
2
3
4
5
Caution:
❏ Do not leave the front cover
c
open for more than five minutes
to avoid exposing the imaging
cartridges to light.
❏ Do not expose the imaging
cartridges to sunlight at all.
Caution:
Be careful not to damage the
c
transfer belt.
5
Caution:
Do not touch the transfer belt and
c
light-sensitive drums to avoid
damaging them.

Jam A B
Note:
If the MP tray is open, remove all the paper
and then close the MP tray.
1
Caution:
❏ Do not leave the front cover
c
open for more than five minutes
to avoid exposing the imaging
cartridges to light.
❏ Do not expose the imaging
cartridges to sunlight at all.
2
Caution:
❏ Be careful not to damage the
c
transfer belt.
❏ Do not touch the transfer belt
and light-sensitive drums to
avoid damaging them.
3
4
7
5
6
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
If you must touch one of these
areas, wait 30 minutes to allow the
heat to subside before doing so.
Copyright© 2007 Seiko Epson Corporation. All rights reserved.
NPD3085-00