Epson 5010E User Manual
PowerLite® Home Cinema 5010/5010e Home
Theater Projector
User’s Guide
Contents
Introduction 5
Projector Parts 6
Remote Control 8
Optional Accessories 9
Registration and Warranty 9
Using This Manual 10
Setting Up the Projector 11
Choose a Location 11
Installing the Projector 15
Connecting the Cables 17
Connecting Video and Computer Equipment 17
Making Other Connections 19
Installing Batteries in the Remote Control 20
Turning the Projector On and Off 20
Turning On the Projector 20
Turning Off the Projector 21
Selecting the Image Source 21
Positioning the Image 22
Making Basic Adjustments 25
Focusing and Zooming 25
Choosing the Aspect Ratio 26
Viewing 3D images 27
Projecting in Split Screen mode 28
Choosing the Color Mode 29
2 Contents
Advanced Color Adjustments 30
Adjusting the Gamma Setting 31
Adjusting RGBCMY 32
Locking the Projector 32
Making Detailed Adjustments 34
Using the Menu System 34
Changing How the Menus Display 35
Adjusting the Picture Quality 36
Input Brightness Settings 36
Sharpness and Picture Quality Settings 38
Color Settings 39
3D Setup 41
Adjustments for Computer Images 42
WirelessHD Settings (PowerLite Home Cinema 5010e only) 43
Split Screen Setup 44
Selecting Memory Settings and Resetting the Projector 46
Creating Memory Settings 46
Selecting Memory Settings 46
Renaming Memory Settings 47
Deleting Saved Memory Settings 47
Resetting the Projector 48
Customizing Projector Features 49
Image Sizing 49
Screen Options 50
Other Setup Options 50
Adjusting the LCD Alignment 52
Using WirelessHD 55
Placing the WirelessHD Transmitter 55
Setting Up a WirelessHD Connection 56
Contents 3
Using HDMI Link 57
Setting Up HDMI Link 57
Changing HDMI Link Settings 58
Maintenance 59
Cleaning the Lens 59
Cleaning the 3D Glasses 60
Cleaning the Projector Case 61
Cleaning and Replacing the Air Filter 61
Replacing the Lamp 63
Resetting the Lamp Usage Timer 66
Checking the Projector Status 66
Storing the Projector 67
Transporting the Projector 67
Problem Solving 68
What To Do When the Lights Come On or Flash 68
Solving Picture Problems 70
Solving Remote Control Problems 74
Solving WirelessHD Problems 75
Where to Get Help 76
Specifications 77
Notices 82
Important Safety Information 82
FCC Compliance Statement 84
Copyright Notice 85
4 Contents
A Note Concerning Responsible Use of Copyrighted Materials 85
Trademarks 86
Introduction
The PowerLite® Home Cinema 5010/5010e projector lets you enjoy theater-quality 3D
images in the relaxing environment of your own home. Designed especially for home cinema
use, it offers these outstanding features:
■ Native 1080p (1920 × 1080) resolution, dynamic contrast ratio up to 200,000:1 and up
to 2400 lumens of brightness (color and white light output) for incredibly rich, sharp
images in any room lighting
■ Auto Iris system that constantly controls the light output based on the gamma and
black/white levels of your projected content, for perfectly adjusted images and deepest
blacks
■ EPSON C
and uniform colors
■ 1080Perfect
■ 10-bit color quality for unmatched color accuracy, with over a billion colors available
■ HDMI
digital video
■ Built-in cinema filter and Fujinon
2
Fine® 3LCD technology for reliable picture quality, increased contrast ratio
™
video processing for more film-like images free of noise or artifacts
®
(High-Definition Multimedia Interface®) ports for superior, uncompressed
®
lens for exceptional picture quality
■ True 16:9 wide-format projection
■ Flexible setup configurations, including front projection and ceiling mounted, with
vertical and horizontal lens shift dials for offset placement
Introduction 5
Projector Parts
Front
Lamp cover
Horizontal
lens shift dial
Air exhaust
Remote receiver
Zoom ring
Vertical lens shift dial
Power and
warning
lights
Control
panel cover
Focus ring
Auto lens
shutter
Back
Cable clip holes
External 3D IR port
Projector lens
HDMI ports
Air intake
Component ports
Video port
PC port
Power inlet
Control panel
Air filter cover
Adjustable foot
Trigger out port (12V DC
200mA max)
RS-232C port
Kensington® lock port
Power switch
6 Introduction
Bottom
Front adjustable feet
Mounting bracket
attachment points
Projector Control Panel
Power button
Source button
Menu button
Menu navigation/
vertical keystone
buttons
Retractable
cover
Escape button
Enter button
Introduction 7
Remote Control
On button
Turns projector on
HDMI Link button
Enables and disables the
HDMI link function
2D/3D button
Toggles
between 2D and
3D projection
Menu
navigation
buttons
Default button
Resets menu
selection to default
values
Menu button
Displays the projector’s
menus
Auto Iris button
Adjusts the Auto Iris
function
Split button
Adjusts the Split Screen
function
User button
Function can be set by the
user from the Settings
menu
Standby button
Turns projector off
Illumination button
Lights the remote control
buttons for easy viewing
Source buttons
Switch between equipment
connected to the projector
HDMI Link control buttons
Control playback of a linked
video device
Color Mode button
Quickly change color settings
to match room lighting
Super-res button
Adjusts the Super-res setting
on or off
Aspect button
Changes the picture’s aspect
ratio (not available for all
sources)
Frame Int button
Adjusts the Frame
Interpolation setting
Blank button
Temporarily stops projection
or hides the menu screen
RGBCMY button
Displays the color
adjustment menu
Memory button
Accesses the memory
menu
Pattern button
Displays test patterns to
adjust the image
8 Introduction
Optional Accessories
Epson provides the following optional accessories for the projector:
Product Part number
Replacement lamp V13H010L69
Air filter replacement V13H134A39
Kensington security lock (anti-theft device) ELPSL01
Projector mount CHF1000
Computer cable (6 feet [1.8 meters]) F3H982-06
3D active shutter glasses V12H483001
External 3D IR emitter V12H484001
In addition to the accessories listed above, 1-year and 2-year extended service plans are
available. You can purchase these plans and other accessories from an authorized EPSON
reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To
purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Registration and Warranty
Your projector comes with a basic two-year carry-in warranty. For details, see the Quick Setup
sheet.
In addition, Epson offers free Extra Care
SM
Home Service. In the unlikely event of an
equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will
ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See your
Extra Care Home Service brochure for details.
To register, simply follow the registration instructions on the CD, or register online at
epson.com/webreg. Registering also lets you receive special updates on new accessories,
products, and service.
Introduction 9
Using This Manual
This book contains all the information you need to use the projector, in addition to basic
setup and maintenance instructions, troubleshooting tips, important safety instructions,
specifications, and warranty information.
Please follow these guidelines as you read through the manual:
Warning: Must be followed carefully to avoid bodily injury.
Caution: Must be observed to avoid damage to your equipment.
Note: Contains important information about your projector.
Tip: Contains helpful projection tips.
Need additional help? Take advantage of Epson’s automated support services 24 hours a day
at epson.com/support (U.S.) or epson.ca/support (Canada). Use this site to view FAQs or
product information and e-mail Epson.
If you need more help, you can use the EPSON
(800) 637-7661 and enter the PIN on the PrivateLine support card that came with your
projector.7
®
PrivateLine® Support service. Call
10 Introduction
Setting Up the Projector
Follow the instructions in this section to choose a location for the projector, connect the
cables, and display an image.
Choose a Location
You can install the projector for the viewing setups shown below, as well as rear projection.
Front
Ceiling
Setting Up the Projector 11
Keep the projector level and place it at a height so its lens is even with the top or the bottom
of the screen and is centered horizontally. If this is not possible, use the lens shift dials to
reposition the image. You can use lens shift to move the image up or down by nearly its full
height, and left or right by about one-half its width (for details, see page 22).
Offset A
Offset B
Offset refers to distance from
Projection distance
bottom of image to center of
lens using maximum lens shift.
If you place the projector off to the side, aim it straight ahead (rather than at the center of the
screen), then use the horizontal lens shift dial to center the image on the screen.
Horizontal lens shift dial
Vertical lens shift dial
Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the
lens shift dials to change the lens position.
12 Setting Up the Projector
The size of the image is determined by the distance from the projector’s lens to the screen.
Depending on your display settings and how you use the Zoom ring, the actual size may
differ. Use these tables as a guide for projector placement:
16:9 aspect ratio
Projection distance
3.8 to 8.3 feet
1.17 to 2.52 m
5.8 to 12.5 feet
1.77 to 3.80 m
7.8 to 16.7 feet
2.38 to 5.08 m
9.8 to 20.9 feet
2.98 to 6.36 m
11.8 to 25.1 feet
3.59 to 7.64 m
14.7 to 31.4 feet
4.50 to 9.56 m
17.7 to 37.7 feet
5.39 to 11.49 m
4:3 aspect ratio
Projection distance
4.7 to 10.1 feet
1.44 to 3.09 m
7.1 to 15.3 feet
2.18 to 4.66 m
Diagonal image size
(width × height) Offset A Offset B
40 in. (35 × 20 in.)
101.6 cm (89 × 50 cm)
60 in. (51 × 28 in.)
152.4 cm (130 × 75 cm)
80 in. (71 × 39 in.)
203.2 cm (180 × 100 cm)
100 in. (87 × 47 in.)
254 cm (220 × 120 cm)
120 in. (106 × 59 in.)
305 cm (270 × 150 cm)
150 in. (130 × 75 in.)
381 cm (330 × 190 cm)
180 in. (173 × 98 in.)
457 cm (440 × 250 cm)
Diagonal image size
(width × height) Offset A Offset B
40 in. (32 × 24 in.)
101.6 cm (81 × 61 cm)
60 in. (47 × 35 in.)
152.4 cm (120 × 90 cm)
9.1 in.
23 cm
13.8 in.
35 cm
18.1 in.
46 cm
22.8 in.
58 cm
27.2 in.
69 cm
33.9 in.
86 cm
40.9 in.
104 cm
11.0 in.
28 cm
16.5 in.
42 cm
28.7 in.
73 cm
43.0 in.
109 cm
57.5 in.
146 cm
71.7 in.
182 cm
86.2 in.
219 cm
107.5 in.
273 cm
129.1 in.
328 cm
35.0 in.
89 cm
52.8 in.
134 cm
Horizontal
Offset
–15.4 to 15.4 in.
–39 to 39 cm
–23.2 to 23.2 in.
–59 to 59 cm
–30.7 to 30.7 in.
–78 to 78 cm
–38.6 to 38.6 in.
–98 to 98 cm
–46.1 to 46.1 in.
–117 to 117 cm
–57.9 to 57.9 in.
–147 to 147 cm
–69.3 to 69.3 in.
–176 to 176 cm
Horizontal
Offset
–18.9 to 18.9 in.
–48 to 48 cm
–28.3 to 28.3 in.
–72 to 72 cm
9.6 to 20.4 feet
2.92 to 6.23 m
12 to 25.5 feet
3.66 to 7.79 m
14.4 to 30.7 feet
4.40 to 9.36 m
18 to 38.4 feet
5.51 to 11.71 m
80 in. (63 × 47 in.)
203.2 cm (160 × 120 cm)
100 in. (79 × 59 in.)
254 cm (200 × 150 cm)
120 in. (94 × 71 in.)
305 cm (240 × 180 cm)
150 in. (118 × 91 in.)
381 cm (300 × 230 cm)
22.0 in.
56 cm
27.9 in.
71 cm
33.5 in.
85 cm
41.7 in.
106 cm
70.1 in.
178 cm
87.8 in.
223 cm
105.5 in.
268 cm
131.5 in.
334 cm
–37.8 to 37.8 in.
–96 to 96 cm
–47.2 to 47.2 in.
–120 to 120 cm
–56.3 to 56.3 in.
–143 to 143 cm
–70.5 to 70.5 in.
–179 to 179 cm
Setting Up the Projector 13
4:3 aspect ratio (continued)
Projection distance
24.2 to 51.3 feet
7.36 to 15.62 m
Diagonal image size
(width × height) Offset A Offset B
200 in. (161 × 118 in.)
508 cm (410 × 300 cm)
55.5 in.
141 cm
175.6 in.
446 cm
Horizontal
Offset
–94.1 to 94.1 in.
–239 to 239 cm
To determine the exact image size when you know the projection distance (or the exact
projection distance when you know the desired image size), you can use the Image Size
Calculator. This program is available on the EPSON website at epson.com/support (U.S.) or
epson.ca/support (Canada).
Also keep these considerations in mind:
■ Make sure there is plenty of space for ventilation around and under the projector. Do not
set the projector on top of loose materials that could block the vents underneath.
■ Make sure the projector is within 9.8 feet (3 m) of a grounded electrical outlet or
extension cord.
In order to view 3D images correctly, 3D glasses must be worn within proper range of the
projector. Use the image below to determine the ideal distance for 3D projection (the shading
represents the 3D viewing area):
Use the optional external 3D emitter and a shielded twisted pair Category 5, RJ45 straight
network cable (make sure to use a regular Ethernet network patch cord, not a crossover-type
cable) of 32 feet (10 m) or shorter if you cannot view the 3D image normally or if the
projector is located more than 16.5 feet (5 m) from the viewing area. See “Optional
Accessories” on page 9 for ordering information.
14 Setting Up the Projector
60º
16.5 ft (5 m)
13 ft (4 m)
Installing the Projector
To install the projector, you first need to determine the location, based on the size of your
screen (maximum diagonal image size). Use the tables on page 13 as a guide to positioning the
projector.
To suspend the projector from a ceiling, you will need the optional projector mount designed
for the projector. See page 9 for ordering information. Follow the instructions included with
the mount to install the projector.
Warning: When installing or adjusting the ceiling mount, do not use adhesives to prevent the
screws from loosening and do not use any type of oil or lubricant. These may cause the projector
casing to crack and the projector may fall, causing serious injury and serious damage to the
projector.
If you install the projector on the ceiling, you will need to invert the picture so that it appears
right side up. Follow these steps:
1. Press the
2. Open the
3. Select
Front/Ceiling.
4. Press the
Menu button on the remote control.
Settings menu, then select Projection.
Menu button to exit the menu system.
Setting Up the Projector 15
The following illustrations show the dimensions of the projector:
18.3 in. (466 mm)
9.2 in. (233 mm)
11.8 in. (300 mm)
5.9 in. (150 mm)
LENS
6.2 in.
(159 mm)
3.3 in.
(83 mm)
3.3 in.
(83 mm)
2.4 in.
(60 mm)
15.6 in.
(396 mm)
6.3 in.
(160 mm)
16 Setting Up the Projector
Connecting the Cables
Connecting Video and Computer Equipment
You can connect the projector to many types of video equipment, such as a Blu-ray
™
/DVD player, digital tuner, cable or satellite box, video game console, camcorder, or
Disc
digital camera. You can also connect it to a desktop or laptop PC or Apple
details on compatible video formats, see page 79.
You can connect up to five pieces of equipment at the same time, using any of the
commercially available cables shown below:
Port name Video equipment connection Computer connection
®
Mac® system. For
HDMI1/
HDMI2
Component Use a component video cable
PC — Use a Mini D-sub, 15-pin monitor cable
Video Use an RCA video cable: —
Note: See page 56 for information on connecting with WirelessHD (PowerLite Home Cinema
5010e only).
Use an HDMI cable (version 1.4 or higher required for 3D):
—
(with RCA-style connectors):
Connect the cable to the three
component video ports. Match
corresponding colors between the
cable and the ports.
to connect to a computer RGB
(monitor) port:
Setting Up the Projector 17
For best results, connect your video equipment to the HDMI port, if possible. If your
equipment doesn’t support HDMI, connect it to either the
component video) or
Note: You need to use a version 1.4 or higher HDMI cable to use the projector’s 3D features. If
you aren’t sure if your HDMI cable is version 1.4 or higher, contact your cable manufacturer.
Video (for composite video) port.
Component (for high quality,
When you connect an HDMI cable to the projector, it is recommended that you fasten it
with the included cable clip. Follow the steps below to install the cable clip.
Note: The included cable clips will fit most standard, round HDMI cables. The clips may not fit
non-round or thick HDMI cables.
1. Connect the HDMI cable to one of the HDMI ports on the projector.
2. Insert the end of the cable clip anchor into the cable clip hole above the HDMI port, as
shown below.
3. Place the open cable clip around the HDMI cable, but don’t lock it into place.
4. Slide the cable clip towards the projector and lock the clip onto the HDMI connector.
To remove the cable clip, unlock the clip and disconnect the HDMI cable. Then pinch the
side of the cable clip anchor and carefully pull it out of the cable clip hole.
18 Setting Up the Projector
Making Other Connections
Connect the power cable and other cables described below, depending on how you plan to
use the projector.
■ Plug the power cable into the projector and a grounded electrical outlet.
■ To use an AV controller with the projector, connect a 9-pin null modem serial cable to
RS-232C port.
the
■ To connect external devices such as motorized screens, connect a mini-jack stereo (3.5
mm) cable to the
page 52 for more information. The Trigger Out port uses a 12V DC (200 mA max)
signal.
Trigger Out port and set the Trigger Out menu option to On. See
■ To connect the optional External IR 3D Emitter, attach a shielded twisted pair Category
5, RJ45 straight network cable (make sure to use a regular Ethernet network patch cord,
not a crossover-type cable) of no more than 32 feet (10 m) to both the emitter and the
External 3D IR port on the back of the projector. See page 9 for part number and
ordering information.
Setting Up the Projector 19
Installing Batteries in the Remote Control
The remote control uses two AA batteries.
Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor
immediately.
1. Release the tab and lift open the cover.
2. Insert two new AA batteries as shown.
3. Reinsert the cover and press it down until it clicks into place.
Aim the remote control at the screen, or at the front or back of the
projector. Make sure you are within 32 feet (10 meters) of the projector.
If you suspect the batteries are weak, press the illumination button. If
the buttons do not glow, replace the batteries.
Turning the Projector On and Off
Turning On the Projector
1. Turn on the power switch on the back of the projector.
2. Turn on any connected equipment you plan to use.
3. Press the
Note: To prevent children from turning on the projector, you can use the Child Lock feature. See
page 32 for details.
If you’ll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 52 for
details.
On button on the remote control or the Ppower button on the projector.
20 Setting Up the Projector
Remote control Projector
The power light flashes while the projector warms up. If you don’t see a picture, you may
need to change the image source as described on page 21.
Turning Off the Projector
1. Turn off any equipment connected to the projector.
2. Press the Ppower button on the projector twice or press the
remote control and wait for the power light to stop flashing.
3. Turn off the power switch on the back of the projector.
Caution: Turn off this product when not in use to prolong the life of the projector.
Standby button on the
Selecting the Image Source
The source buttons on the projector and remote control let you switch between images from
different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player,
cable or satellite box, or video game console).
Press the
video source is connected.
Note: There may be a brief delay when switching between sources.
Source button on the remote control that corresponds to the port to which your
Setting Up the Projector 21
If you press the source button on the projector, you see a list of available sources. Press
the source button to move through the list and select the desired source.
Note: If an image does not appear, see “Problem Solving” on page 68.
To temporarily turn off the image and darken the screen, press the Blank button on the remote
control. Press the Blank button again to return to normal viewing.
Positioning the Image
If the projector is not centered in front of the screen, use the lens shift dials and, if needed,
vertical keystone buttons to correct the position and shape of the image.
Horizontal lens shift dial
Note: You can display a test pattern to help adjust the image position by pressing the Pattern
button on the remote control. Press the Esc button to turn off the test pattern.
22 Setting Up the Projector
Vertical lens shift dial
Vertical keystone
buttons
The vertical position (V) can be adjusted by up to 96% of the height of the screen, while the
horizontal position (H) can be adjusted by up to 47% of the width of the screen.
If one side of the image is taller than the other, make sure the projector is parallel to the
screen. If necessary, adjust the front feet so that the projector is horizontal.
Adjustable feet
Note: If the projected image shape is not rectangular, the projector is not level with the screen.
It’s best to adjust the physical position of the projector to correct this. If you still can’t correct the
image shape by adjusting the position of the projector, use the vertical keystone buttons to fix the
image shape.
Setting Up the Projector 23
When setting up the projector, make sure that it is placed level to the screen in order to
provide the best possible image quality. If you must set up the projector at an angle, use the
vertical keystone buttons to correct the image shape.
24 Setting Up the Projector
Making Basic Adjustments
Follow the instructions in this chapter to make basic adjustments to the image shape, size,
color, and quality. For further refinements, see “Making Detailed Adjustments” on page 34.
Focusing and Zooming
Use the focus ring to sharpen the image.
Use the zoom ring to reduce or enlarge the image.
Making Basic Adjustments 25
Choosing the Aspect Ratio
In many cases, video signals are automatically resized to fit on your screen when Auto is
selected as the Aspect setting. You may need to change the size of the image (or aspect ratio)
for certain image types by pressing the
Note: When displaying 720p, 1080i, or 1080p signals through the HDMI or Component video port,
the aspect ratio is automatically selected and you cannot change it.
If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can use
the Zoom Caption Pos. option and other settings to resize and reposition the image. For details,
see page 50.
For details on how the projector resizes the picture when you choose an Aspect setting, see
page 80.
Aspect button on the remote control.
Select one of these settings:
■ Normal for standard TV broadcasts, computer images, or images with a 4:3 aspect ratio.
■ Full for images recorded in 16:9 (wide-screen) format and squeeze mode.
■ Zoom for letterbox images.
4:3 image using Normal setting 16:9 image using Full setting
■ Wide for expanding a 4:3 image to 16:9 so it fills the whole screen. This stretches only
the right and left sides of the image; the central part is unchanged.
26 Making Basic Adjustments
Loading...