Emerson Fisher V500, Fisher V250, Fisher V260, Fisher 8510, Fisher 8532 Data Sheet

Rotary Valve Selection Guide

D102550X012

Fisherr Rotary Valve Selection Guide

Product Bulletin

40:002

January 2013

W6539

V260 VALVE

Control-Disk Valve

Vee-Ball Valves High-capacity, low-friction, non-clogging Fisher V150, V200, V300, and V150S

High-Performance Butterfly Valves

Pipeline Valves

Eccentric Plug Valves

 ENVIRO-SEALt live-loaded packing systems are available to assist in compliance with

environmental emissions requirements

 FIELDVUEt digital valve controllers offer digital control and remote diagnostics. The

traditional proven line of Fisher positioners, controllers, transmitters, and switches also is
available.

W8172-3

Vee-Ballt VALVE

TYPICAL Fisher ROTARY VALVES

Expanded control range, lower process

variability

Outstanding performance under extreme

pressure and temperature conditions, available

foravarietyofthrottlingoron/offapplications

Full- or reduced-bore ball valves for throttling

and severe service applications in gas

transmission lines, gas distribution, or liquid

pipelines

Designed for throttling control for a broad range

of industrial applications

W9418-2

Control-Diskt VALVE

Fisher Control-Disk Valve

Fisher 8510, 8532, 8580, 9500, and DSV

Fisher POSI-SEALt A11, A31A, A31C, A31D, and

A81

Fisher V250 and V260

Fisher V500 and CV500

 Spring-return pneumatic diaphragm and double -acting piston actuators

 Contact your Emerson Process Management sales office for details

www.Fisher.com

Product Bulletin

40:002
January 2013

Fisher Control-Disk Valve

Figure 1. Fisher Control-Disk Valve

W9421

Expanded control, lower process variability applications

EN: 1.0619 steel, 1.4409 stainless steel, CW2M, or M35-1

ASME: SA216 WCC steel, SA351 CF3M stainless steel, CW2M, or M35-1

Soft (PTFE or UHMWPE) or metal (S31600)

Flow Characteristics and Maximum Flow Coefficients

Maximum Cv from 60.7 to 4530

Rangeability (Flow Coefficient Ratio)

Available Actuators (refer to page 11)

Fisher 2052, 1051, 1052, and 1061

Rotary Valve Selection Guide

D102550X012

Control-Disk VALVE

Control-Disk Valve

Applications

Style

Wafer and single flange

Sizes

NPS2,3,4,6,8,10,12

Ratings

PN 10 to 40

CL150 and CL300

End Connections

Raised-face (RF)

Valve Body Materials

Disk Material

SA351 CF3M stainless steel

Seal Types (Material)

Equal percentage

100 to 1

Shutoff Class

Soft Seal: Bubble-tight

Metal Seal: 1% of Class IV

2

Rotary Valve Selection Guide

D102550X012

Fisher Vee-Ball Valves

Figure 2. Fisher Vee-Ball Valves

Product Bulletin

40:002

January 2013

W74351 W8509

V150 and V300 VALVES

V150 AND V300 V200 V150S

Excellentforfibrousslurriesaswellasliquids,gas,

and steam. Shearing V-notch ball for smooth,

non-clogging action.

V150: DN 25 - 500 or NPS 1 - 24 x 20

V300: DN 25 - 500 or NPS 1 - 20

V150: PN 10/16 or CL150
V300: PN 25/40 or CL300

Raised-face (RF) flanged Flangeless Raised-face (RF) flanged

EN: 1.0619 steel, 1.4409 stainless steel, M35-1, or

CW2M

ASME: SA216 WCC steel, SA351 CF3M, CG8M

stainless steel, M35-1, or CW2M

SA351 CF3M, or CG8M stainless steel, CW2M SA351 CF3M or CG8M stainless steel, CW2M

TCM Plus, metal (S31600), HD (heavy duty)

metal, or flow ring

Modified equal percentage

Maximum Cv from 3.64 to 10,300

300 to 1 300 to 1

Composition Seal: Class VI

Metal Seal: Class IV

Flow Ring Construction: 5% of wide-open capacity

W5787

V200 VALVE

Applications

Excellentforfibrousslurriesaswellasliquids,gas,

andsteam.ShearingV-notch ball for smooth,

non-clogging action.

Sizes

NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10 NPS3,4,6,8,10,12

Ratings

CL150, CL300, or CL600 depending on size. CL150

End Connections

Valve Body Materials

EN: 1.0619 steel, 1.4409 stainless steel, M35-1, or

CW2M

ASME: SA216 WCC steel, SA351 CF3M, CG8M

stainless steel, M35-1, or CW2M

Ball Material

Seal Types (Material)

TCM Plus, metal (S31600), HD (heavy duty)

metal, or flow ring

Flow Characteristics and Maximum Flow Coefficients

Modified equal percentage

Maximum Cv from 8.4 to 3000

Rangeability

Shutoff Class

Composition Seal: Class VI

Metal Seal: Class IV

Flow Ring Construction: 5% of wide-open capacity

Available Actuators (refer to page 11)

Fisher 2052, 1051, 1052, 1061, and FieldQt

V150S VALVE

Highly wear-resistant trim materials and an

unrestricted flow path make this design ideal for

controlling the most abrasive of slurries.

SA216 WCC steel body liner: (high-chrome iron

SA532 Class III Type A)

High-chrome iron SA532 Class III Type A (PSZ

ceramic ball is optional)

Flow ring construction

Modified equal percentage

Maximum Cv from 170 to 2850

Class I

3

Product Bulletin

40:002
January 2013

Rotary Valve Selection Guide

Fisher High-Performance Butterfly Valves

Figure 3. Fisher High-Performance Butterfly Valves

D102550X012

W9498-2 W9138-2

8580 VALVE

8580 8532 8510

Precise throttling service for process

temperatures from -129 to 454_C

Wafer and single flange Wafer and single flange Wafer and single-flange

NPS2,3,4,6,8,10,12 NPS 14, 16, 18 ,20, 24

PN 10 to 40

CL150 and CL300

Raised-face (RF) Raised-face (RF) and ring-type joint (RTJ) Raised-face (RF)

EN: 1.0619 steel, 1.4409 stainless steel

ASME: SA216 WCC steel, SA351 CF3M stainless

High-alloy materials are available

SA351 CF3M stainless steel SA351 CF8M stainless steel SA216 WCC steel or SA351 CF8M stainless steel

Soft (PTFE or UHMWPE) or metal (S31600) Soft (PTFE), NOVEX, and Phoenix III Soft (PTFE) or metal (S31600)

Maximum C

Metal Seal: 1% of Class IV

Fisher 2052, 1051, 1052, and 1061

steel

Approximately linear

from 83.7 to 5080

v

100 to 1 100 to 1 100 to 1

Soft Seal: Class VI

Throttling service, high-temperature, and

SA216 WCC steel or SA351 CF8M stainless steel

Flow Characteristics and Maximum Flow Coefficients

Available Actuators (refer to page 11)

8532 VALVE

Applications

cryogenic applications; -196 to 816_C

Style

Sizes

Ratings

CL150 and CL300

End Connections

Valve Body Materials

High-alloy materials are available

Disc Material

Seal Types (Materials)

Modified equal percentage

Maximum C

Fisher 1051, 1052, and 1061

from 4550 to 21,500

v

Rangeability

Shutoff Class

Soft Seal: Class VI

NOVEX Seal: SP-61

Phoenix III Seal: Class VI

W3542

8510 VALVE

General-purpose valve for a variety of liquids and

gasses

DN 350, 400, 500, 600
NPS 14, 16, 18, 20, 24

PN 16

CL150

SA216 WCC steel or SA351 CF8M stainless steel

High-alloy materials are available

Approximately linear

Maximum Cv from 7040 to 21,800

PTFE Sea l: Bidirectional Class VI

S31600 Seal: 1/10 of Class IV

Fisher 2052, 1051, 1052, and 1061

4

Product Bulletin

Rotary Valve Selection Guide

D102550X012

January 2013

Fisher High-Performance Butterfly Valves (continued)

Figure 4. Fisher High-Performance Butterfly Valves (continued)

40:002

W1628

9500 VALVE

9500 DSV

Applications

Fully lined butterfly valve for on/off or throttling service for tight-shutoff

applications

Style

Wafer Wafer

Sizes

NPS2,3,4,6,8,10,12 NPS 4, 6, 8, 10, 12, 14

Ratings

PN10, PN13, CL125B, CL150, or CL300 depending on size and material CL300

End Connections

Cast Iron Bodies: Mate with PN 10 (NPS 2, 3, 6, 8, 10) or CL125B FF flanges
Steel and Stainless Steel Bodies: Mate with PN16, CL150, CL300 RF flanges

Valve Body Materials

Cast iron, carbon steel, S31600 stainless steel SA240 S31600 stainless steel

Disc Material

Aluminum bronze, S31600 stainless steel SA351 CG8M stainless steel

Seal Types (Material)

Fully lined nitrile or PTFE No seal

Flow Characteristics and Maximum Flow Coefficients

Approximately equal percentage through 90_ rotation for FISHTAILt disc

and through 60_ rotation for conventional disc

Maximum Cv from 91 to 7020

Rangeability

100 to 1 100 to 1

Shutoff Class

Class VI 5% of valve capacity

Available Actuators (refer to page 11)

Fisher 2052, 1051, 1052, and 1061

W6094

DSV VALVE

Rapid on/off, high-cycle applications; temperatures to 232_C

Mates with CL300 RF flanges

On/off service

Maximum Cv from 434 to 7040

Fisher 1061

5

Product Bulletin

40:002
January 2013

Rotary Valve Selection Guide

Fisher POSI-SEAL High-Performance Butterfly Valves

Figure 5. Fisher POSI-SEAL High-Performance Butterfly Valves

D102550X012

W9529-2

A11 VALVES

A11

Applications

Throttling and automated on/off service, high-pressure, high-temperature, and cryogenic applications; -254 to 816_C

Style

Wafer and single flange

Ratings and Sizes

CL150/150 and CL150: NPS 30, 36, 42, 48, 54, 60, 66, 72

CL300: NPS 30, 36, 42, 48

CL600: NPS 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 30, 36, 42, 48 (CL300 trim available for NPS 3 through 48)

CL900: NPS 6, 8, 10, 12, 14, 16 ,18, 20, 24, 30, 36 (CL300 and CL600 trim available for NPS 3 through 48)

CL1500: NPS 10, 12, 14, 16, 18, 20 (CL300 and CL600 trim available for NPS 3 through 48, CL900 trim available for NPS 6 through 36)

CL2500: Consult your Emerson Process Management sales office

End Connections

Raised-face(RF),ring-typejoint(RTJ),andbuttweldingends(BWE)

NPS 3 through 24 comply with ASME B16.5

NPS 30 through NPS 60 comply with MSS-SP-44

Valve Body Materials

SA216 WCC steel or SA351CF8M stainless steel

Other carbon steel, stainless steel, and high-alloy materials are available

Disc Material

CL150/150, CL150, and CL300: SA351 CF8M stainless steel or SA216 WCC steel

CL600: SA351 CF8M stainless steel

CL900 and CL1500: CB7Cu-1

Seal Types (Material)

CL150 and CL300: Soft (PTFE), NOVEX (S31600), Phoenix III (S31600/PTFE), and cryogenic (CTFE)

CL600, CL900, and CL1500: Soft (ETFE), Metal (S20910), high-pressure (S20910), Phoenix III (S31600/ETFE), and cryogenic (CTFE)

Flow Characteristics and Maximum Flow Coefficients

Maximum Cv from 182 to 106,000

Rangeability (Flow Coefficient Ratio)

100 to 1

Shutoff Class

Soft Seal: Bidirectional bubble-tight (Class VI or better)

NOVEX Seal: Class V (standard), Class VI (optional)

Metal Seal: 20% of Class IV

High-Pressure Seal: Class V (standard), Class VI (optional)

Phoenix III Seal: Class VI

Cryogenic Seal: 0.1% of Class IV

Available Actuators (refer to page 11)

Fisher 2052, 1051, 1052, 1061, FieldQ, and Bettist

W9570-1

6

Product Bulletin

Rotary Valve Selection Guide

D102550X012

Fisher POSI-SEAL High-Performance Butterfly Valves
(continued)

Figure 6. Fisher POSI-SEAL High-Performance Butterfly Valves (continued)

40:002

January 2013

W9461

A81 VALVE

A81 A31A A31D

Applications

On/off service, rack-and-pinion actuator for

temperatures from -129 to 454_C

Wafer and single flange Wafer and single flange Double flange

NPS2,3,4,6,8,10,12 NPS 14, 16, 18, 20, 24 NPS 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24

PN 10 to 40

CL150 and CL300

Raised-face (RF) Raised-face (RF) and ring-type joint (RTJ) Raised-face (RF) and ring-type joint (RTJ)

EN: 1.0619 steel, 1.4409 stainless steel

ASME: SA216 WCC steel, SA351 CF3M stainless

steel

High-alloy materials are available

SA351 CF3M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel

Soft (PTFE or UHMWPE) or Metal (S31600) Soft (PTFE), NOVEX, or Phoenix III Soft (PTFE), NOVEX, or Phoenix III

MaximumCvfrom83.7to5080 Maximum Cv from 4550 to 21,500

100 to 1

Soft Seal: SP-61

Metal Seal: SP-61

FieldQ Bettis Fisher 2052, 1051, 1052, 1061 and Bettis

On/off service, high-temperature and cryogenic

applications; -196 to 816_C

Style

Sizes

Ratings

CL150 and CL300 CL150 and CL300

End Connections

Valve Body Materials

SA216 WCC steel or SA351 CF8M stainless steel

High-alloy materials are available

Disc Material

Seal Types (Material)

Flow Characteristics and Maximum Flow Coefficients

Rangeability

100 to 1 100 to 1

Shutoff Class

Soft Seal: Class VI

NOVEX Seal: SP-61

Phoenix III Seal: Class VI

Available Actuators (refer to page 11)

W9134-2

A31A VALVE

On/off and throttling service, high-temperature

and cryogenic applications; -196 to 816_C

SA216 WCC steel or SA351 CF8M stainless steel

High-alloy materials are available

Soft Seal: Bidirectional bubble-tight (Class VI or

better)

NOVEX Seal: Class V (standard); Class VI (optional)

Phoenix III Seal: Class VI

7

Product Bulletin

40:002
January 2013

Rotary Valve Selection Guide

D102550X012

Cryogenic Butterfly Valves

Figure 7. Fisher Cryogenic Butterfly Valves

W7449

TYPICAL CRYOGENIC BUTTERFLY VALVE

A31C 8532 A31A A11

Applications

A31C stainless steel cryogenic valves

for liquified natural gas and other
special chemical a nd hydrocarbon
applications with temperatures to

-254C

Wafer, single flange, and double

flanged

CL150 and CL300: NPS 3 - 12 CL150 and CL300: NPS 14 - 24 CL150 and CL300: NPS 14 - 24 CL150/150, CL150, CL300:

Raised-face (RF), ring-type joint (RTJ) Raised-face (RF), ring-type joint (RTJ) Raised-face (RF), ring-type joint (RTJ) Raised-face (RF), ring-type joint (RTJ)

SA351 CF8M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel

SA351 CF8M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel

NOVEX and Cryogenic (CTFE and

CTFE/aluminum)

Maximum Cv from 188 to 4940 Maximum Cv from 4550 to 21,500 Maximum Cv from 4550 to 21,500 Maximum Cv from 182 to 106,000

100 to 1 100 to 1 100 to 1 100 to 1

NOVEX Seal: Class VI

Cryogenic (CTFE) Seal: 0.1% of Class

IV

Cryogenic (CTFE/Aluminum) Seal:

Class VI

Fisher 2052, 1051, 1052, 1061; FieldQ and Bettis FieldQ and Bettis Fisher 2052, 1052, 1061; FieldQ and

8532 stainless steel cryogenic valves

for liquified natural gas and other
special chemical and hydrocarbon
applications with temperatures to

-254C.

Wafer, single flange, and double

flanged

Ratings and Sizes

End Connections

Valve Body Materials

Disc Material

Seal Types (Material)

NOVEX and Cryogenic (CTFE and

CTFE/aluminum)

Flow Characteristics and Maximum Flow Coefficients

Rangeability

Shutoff Class

NOVEX Seal: Class VI

Cryogenic (CTFE) Seal: 0.1% of Class

IV

Cryogenic (CTFE/Aluminum) Seal:

Class VI

Available Actuators (refer to page 11)

A31 stainless steel cryogenic valves

for liquified natural gas and other
special chemical and hydrocarbon
applications with temperatures to

-254C.

Style

Wafer, single flange, and double

flanged

NOVEX and Cryogenic (CTFE and

CTFE/aluminum)

NOVEX Seal: Class VI

Cryogenic (CTFE) Seal: 0.1% of Class

IV

Cryogenic (CTFE/Aluminum) Seal:

Class VI

A11 stainless steel cryogenic valves

for liquified natural gas and other
special chemical and hydrocarbon
applications with temperatures to

-254C.

Wafer, single flange, and double

flanged

NPS 30 - 48
CL600: NPS 3 - 24
CL900: NPS 6 - 24

CL1500: NPS 10 - 20

CL150 and CL300: NOVEX and

Cryogenic (CTFE)

CL600, CL900, and CL1500:

HPS and cryogenic (CTFE)

NOVEX Seal: Class VI

Cryogenic (CTFE) Seal: 0.1% of Class

IV

Cryogenic (CTFE/Aluminum) Seal:

Class VI

HPS: Class VI

Bettis

8

Rotary Valve Selection Guide

D102550X012

Fisher Pipeline Valves

Figure 8. Fisher Pipeline Valves

Product Bulletin

40:002

January 2013

W7169

V250 VALVE

V250 V260

Applications

Heavy-duty, flangeless throttling ball valves. Often used for controlled flow

applications in gas transmission lines, gas

distribution, and liquid pipelines. Temperatures from -40 to 204C,

depending on seal type

Flangeless Flanged

NPS 4, 6, 8, 10, 12, 16, 18, 20, 24 NPS 8, 10, 12, 16, 20, 24

CL600 or CL900 CL150, CL300, or CL600

End Connections

Raised-face (RF) or ring-type joint (RTJ) Raised-face (RF)

Valve Body Materials

Carbon steel (LCC) Carbon steel (LF2)

Ball Material

Chrome-plated WCC steel Chrome-plated WCC steel

Seal Types (Material)

Single or dual seal (POM) or flow ring Single or dual (PEEK/PTFE or POM)

Flow Characteristics and Maximum Flow Coefficients

Modified equal percentage

Maximum Cv from 499 to 18,300

Rangeability

100 to 1 100 to 1

Shutoff Class

Single and Dual Seal: Lass than 1% of Class IV

Flow Ring: 1% of valve capacity

Available Actuators (refer to page 11)

Fisher 1051, 1052, 1061, and Bettis Fisher 1051, 1052, 1061, and Bettis

W6365

V260 VALVE

Large, flanged throttling ball valves. Used for demanding pipeline

applications such as pump bypass and pipeline take-off. Temperatures from

-29 to 93C, depending on seal type

Style

Sizes

Ratings

Modified linear or modified equal percentage

Maximum Cv from 4960 to 31,000

Single or Dual Seal: Less than 10% of Class IV

PEEK/PTFE Seal: Less than 10% of Class IV

POM Seal: Lass than 10% of Class IV

9

Product Bulletin

40:002
January 2013

Fisher Eccentric Plug Valves

Figure 9. Fisher Eccentric Plug Valves

Rotary Valve Selection Guide

D102550X012

W4170

V500 VALVE

V500 CV500

Applications

Flanged or flangeless eccentric plug rotary control valve for erosive, coking,

and other hard-to-handle fluids. Throttling or on/off. Temperatures from

-198 to 538C, depending on materials.

Flanged or flangeless Flanged or flangeless

DN 25 - 200 or NPS 1 - 8

PN 10 - 100 or CL150 - CL600

End Connections

Raised-face (RF) or ring-type joint (RTJ) Raised-face (RF)

Valve Body Materials

WCC steel or 316 stainless steel

Plug Material

Chrome-plated CF8M, solid alloy 6, or ceramic CF3M stainless steel

Flow Characteristics and Maximum Flow Coefficients

Modified linear

Maximum Cv from 12.2 to 1050

Rangeability

100 to 1 200 to 1

Shutoff Class

Class IV Class IV

Available Actuators (refer to page 11)

Fisher 2052, 1051, 1052, 1061, and FieldQ Fisher 2052, 1051, 1052, 1061, and FieldQ

W5793

CV500 VALVE

Rugged flanged or flangeless cammed-segmented V-notch ball valve

offering erosion resistance and pressure control for gases, liquids, and

fibrous slurries. Throttling or on/off. Temperatures from -198 to 538C,

depending on materials.

Style

Sizes

DN 80 - 300 or NPS 3 - 12

Ratings

PN 10 - 100 or CL150 - CL600

EN: 1.0619 steel or 1.4581 stainless steel

ASME: WCC steel or CF3M and CF8M stainless steel

Modified equal percentage

Maximum Cv from 181 to 3080

10

Rotary Valve Selection Guide

R

D102550X012

Fisher 2052, 1051, 1052, and 1061 Actuators

Figure 10. Fisher Rotary Valve Actuators

Product Bulletin

40:002

January 2013

W9589

2052 ACTUATOR

2052 1051 AND 1052 1061

Heavy-duty actuator with enclosed linkage and splined actuator-valve connection for minimized lost motion

Spring-return pneumatic diaphragm actuator Spring-return pneumatic diaphragm actuator Double-acting pneumatic piston actuator

Typical Operating Torque Range (Varies with Operating Pressure and Construction)

50.8 to 565 NSm 85 to 1370 NSm 282 to 19,800 NSm

Pneumatic or electro-pneumatic valve positioners, FIELDVUE digital valve controllers, limit switches, position transmitters, handwheels, travel stops,

lock-out device to disable actuator during maintenance, supply pressure filter-regulator.

W3813

1051 AND 1052 ACTUATORS

Features

Style

Accessories

W3827

1061 ACTUATO

11

Product Bulletin

40:002
January 2013

FieldQ and Bettis GActuators

Figure 11. Rotary Valve Actuators

Rotary Valve Selection Guide

D102550X012

W9429

FieldQ ACTUATORS

FieldQ ACTUATOR Bettis G

Compact rack-and-pinion pneumatic actuator for quarter-turn applications

for mounting to Fisher valves

Double-acting or spring-return pneumatic piston actuator

Typical Operating Torque Range (Varies with Operating Pressure and Construction)

40 to 2444 NSm 531 to 5650 NSm

Pneumatic or electro-pneumatic valve positioners, FIELDVUE digital valve

controllers, limit switches, position transmitters, travel stops

W8305

BETTIS G-SERIES ACTUATOR

Features

Scotch yoke type actuator for mounting to Fisher rotary valves.

Style

Double-acting or spring-return series single power module pneumatic

actuator

Accessories

Pneumatic or electro-pneumatic valve positioners, FIELDVUE digital valve

controllers, limit switches, position transmitters, handwheels, travel stops,

supply pressure filter-regulator

12

Rotary Valve Selection Guide

D102550X012

Alloy Valve Guidelines

 Emerson Process Management expertise has combined its knowledge of metals and foundry

techniques with valve user experience in creating high alloy valves that fight corrosion
successfully.

 Guidelines have been developed to help the valve user specify alloy valves correctly.

Techniques have also been implemented that verify a foundry's ability to cast alloy valves
properly and has established stringent specifications that guide the foundry in providing
quality results.

 Valve user guidelines include: Avoid the use of alloy tradenames, Don't specify wrought for

cast, Forego non-destructive testing.

 Steps used t o qualify a foundry include: Weldability tests to gauge the foundry's ability to pour

alloy materials, Dedicating casting patterns solely to high-alloy service.

 Stringent specifications developed by Emerson Process Management include: Raw Material

Composition and Quality, Heat Qualification, Visual Inspection, Weld Repair, Heat Treatment,
and Nondestructive Testing.

Product Bulletin

40:002

January 2013

13

Product Bulletin

40:002
January 2013

Figure 12. Typical Fisher Rotary Products

Rotary Valve Selection Guide

D102550X012

W8755

DVC2000 DVC6200 on Control-Disk VALVE

 A complete line of actuators and accessories for the Fisher rotary valves is offered that meet

W9418-2

your price/performance expectations

 FIELDVUE digital valve controllers are communicating, microprocessor-based controllers that

use HARTr and F

OUNDATIONt fieldbus protocols. Through digital communications, the

controllers give easy access to actuator, valve, and instrument information that is critica l to
process operation

 ValveLinkt software and AMS Suite: Intelligent Device Manager allow you to care for and

maintain equipment assets -- such as v a lves, transmitters, analyzers, motors, pumps, and
plant unit equipment such as pipes, vessels, tanks, columns, reactors, digesters, etc. -- to
improve yields and minimize downtime of industrial manufacturing processes.

 Contact your Emerson Process Management sales office for details

14

Rotary Valve Selection Guide

D102550X012

Product Bulletin

40:002

January 2013

15

Product Bulletin

40:002
January 2013

Rotary Valve Selection Guide

D102550X012

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Fisher, Vee-Ball, Control-Disk, POSI-SEAL, ENVIRO-SEAL, FIELDVUE, FieldQ, Bettis, FISHTAIL, and ValveLink are marks owned by one of the companies in the
Emerson Process Management business unit of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and
service marks of Emerson Electric Co. All other marks are the property of their respective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they arenot
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.

Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com

E 1998, 2013 Fisher Controls International LLC. All rights reserved.

16