Electrolux LS6AH Installation Manual
USA CONTENTS
A SAFETY INSTRUCTIONS ................................................................................Pag. 4
B GENERAL RECOMMENDATIONS ..................................................................Pag. 5
B1 HANDLING................................................................................................................................Pag. 5
B2 UNPACKING ............................................................................................................................. Pag. 5
B3 DISPOSAL OF PACKING MATERIAL....................................................................................... Pag. 6
B4 TECHNICAL DATA.................................................................................................................... Pag. 7
C INSTALLATION AND START-UP INSTRUCTIONS........................................Pag. 9
C1 WATER CONNECTION............................................................................................................. Pag. 9
C2 ELECTRICAL CONNECTION................................................................................................... Pag. 9
C3 WARNING MESSAGES DISPLAYED ON THE CONTROL PANEL......................................... Pag. 10
ENGLISH
C4 DETERGENT/RINSE-AID DISPENSERS AND SETTINGS...................................................... Pag. 11
C5 SETTING THE DISPENSERS................................................................................................... Pag. 12
D USER INSTRUCTIONS.....................................................................................Pag. 14
D1 STARTING................................................................................................................................. Pag. 14
D2 WASH CYCLES................................................................. ... .... ... ... ........................................... Pag. 15
D3 OPERATION.............................................................................................................................. Pag. 15
D4 END OF WORK AND DAILY CLEANING.............................................................. ... ... ... ... .... ... . Pag. 16
D5 MAINTENANCE......................................................................................................................... Pag. 17
E TROUBLESHOOTING......................................................................................Pag. 19
3
A SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury when using you r dishwasher, pleas e follow these basic precautions including the following:
• Read all instructions before using your dishwasher.
• This Manual does not cover every possible condition and situation that may occur. Use common sense and caution
when installing, operating and maintaining this appliance.
• Do not sit, stand or lean on the door or racks of a dishwasher.
• Store dishwasher detergent and rinse agents in clearly marked packages with MSDS (Material Safety Data Sheets)
sheets in a safe place.
• FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUID IN
THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
• Your dishwasher uses hot water to clean and sanitize a variety of wares. Machine surfaces and wares become hot
during and immediately following normal operations. Operators should use caution when loading and unloading
wares from the machine.
• Do not touch the heating element during or immediately after use.
• The installation of this unit must conform to local codes or, in the absence of local codes, to all National Codes governing plumbing, sanitation, safety and good trade practices.
• BEFORE SERVICING, DISCONNECT THE ELECTRICAL SERVICE AND PLACE A RED TAG AT THE DISCON-
NECT SWITCH TO INDICATE WORK IS BEING DONE ON THAT CIRCUIT.
• NOTICE: CONTACT YOUR AUTHORIZED SERVICE COMPANY TO PERFORM MAINTENANCE AND REPAIRS.
• NOTICE: Using any parts other than genuine factory manufactured parts relieves the manufa cturer of all warranty
and liability.
• NOTICE: Manufacturer reserves the right to change specifications at any time without notice.
• WARNING: The equipment warranty is not valid unless the appliance is installed, started and demonstrated under
the supervision of a factory trained installer.
• WARNING: The unit must be installed by Personnel who are qualified to work with electricity and plumbing. Improper
installation can cause injury to personnel and/or damage to the equipment. The unit must be installed in accordance
with applicable codes.
SAVE THESE INSTRUCTIONS
4
B GENERAL RECOMMENDATIONS
WARNING
CAREFULLY READ THE INSTALLATION OPERA-
TING AND MAINTENANCE INSTRUCTIONS BEFORE
INSTALLING THIS APPLIANCE. INCORRECT
INSTALLATION, ADAPTATIONS OR ALTERNATIONS
COULD CAUSE DAMAGE TO PROPERTY OR PERSONAL INJURY. FAILURE TO COMPLY WITH THESE
INSTRUCTIONS, ABUSE RESULTING IN DAMAGE
AND IMPROPER INSTALLATION WILL VOID WARRANTY AND RESPONSIBILITIES OF THE MANUFACTURER.
1. Carefully read this instructions booklet, as it contains
important advice for safe installation, operation and
maintenance. Keep this booklet handy in a safe place
for future reference.
2. The installation instructons contained herein are
for the use of qualified installation and service
personnel only. Installation or service by other
than qualified personnel may result in damage to
the appliance and/or injury to the operator. FAILURE TO COMPLY WITH INSTALLATION
INSTRUCTION OR IMPROPER INSTALLATION
WILL VOID WARRANTY AND RESPONSIBLITIES
OF THE MANUFACTURE.
3. The equipment warranty is not valid un less the unit is
installed, started and demonstrated under the supervision of a factory trained installer.
4. Switch off the appliance in the event of failure or mal functioning at the main circuit breaker.
Only have the appliance repaired by an Authorized Service Center and be sure to ask for OEM original spare
parts.
B1 HANDLING
Use suitable means to move the appliance: a lift truck or
fork pallet trucks (the forks should reach more than halfway beneath the appliance).
B2 UNPACKING
Wear protective gloves to unpack.
Figure 1
Lift the appliance using a lift truck,
ENGLISH
NOTICE FOR SHIPPING DAMAGE
• The container should be examined for damage
before and during unloading.
• The freight carrier has assumed responsibility for its
safe transit and delivery.
• If damaged equipment is received, either apparent or
concealed, a claim must be made with the delivering
carrier. Apparent damage o r loss must be noted on
the freight bill at the time of delivery.
• The freight bill must then be signed by the carrier
representative (Driver). If the bill is not signed, the
carrier may refuse the claim. The supply can supply
the necessary forms.
• A request for inspection must be made to the carrier
within 15 days if there is concealed damage or loss
that is not apparent until after the equipment is uncrated. The carrier should arrange an inspection.
• Be certain to hold all contents plus all packing material. Under no circumstances should a damaged
appliance be returned to the manufacturer without
prior notice and written authorization.
Figure 2
remove the base and position the appliance where it is
to be installed.
Figure 3
Remove the protective film and ensure that the packagingmaterial is disposed of correctly in compliance with
5
the regulations in force in the country where the product
is to be used.
B3 DISPOSAL OF PACKING MATERIAL
All the packaging materials are environmentally safe and
friendly. They maybe kept without fear or danger. They
may be recycled or burned in a special waste incineration plant. Recyclable plastic components are marked as
follows:
polyethylene external wrapping film,
PE
polypropylene
PP
polystyrene
foam
PS
instruction bag.
top packaging panels,
straps.
protective surround elements.
Wood and cardboard components may be disposed of
according to local regulations in force. Appliances that
have reached the end of their service life should be suitably disposed of. The applia nce should be dismantled
according to regulations in force. All metal parts are in
stainless steel (AISI 304) and are removable. Plastic
parts are marked with the symbol of the material.
6
B4 TECHNICAL DATA
MODEL LS6AH / WT30H LS6AH / WT30H
Supply voltage: 208V, 1ph, 60Hz 33amp 240V, 1ph, 60Hz, 29amp
field upgrade to 208V, 3ph 60Hz 20amp 240V, 3ph, 60Hz, 18amp
Total Watts 6.85 kW 6.85 kW
Boiler heating elements 6.0 kW 6.0 kW
Tank heating elements 2.2 kW 2.2 kW
Water supply pressure 7.25 - 101psi/50 - 700kPa 7.25 - 101psi/50 - 700kPa
Water supply temperature 122°F/50°C 122°F/50°C
Water supply hardness 140ppm/14°fH max 140ppm/14°fH max
Rinse cycle water consumption 1 gallon/3.8 liters 1 gallon/3.8 liters
Boiler capacity 3 gallons/12 liters 3 gallons/12 liters
Tank capacity 6 gallons/23 liters 6 gallons/23 liters
Standard cycle time with water supply at 122°F/50°C 120/180/240 seconds 120/180/240 seconds
Legal noise level Leq <65dB <65dB
Minimum Supply - Circuit Ampacity 34amp 30amp
Net weight 150lb/68kg 150lb/68kg
Shipping weight 181lb/82kg 181lb/82kg
Shipping width 27 15/16” / 710 mm 27 15/16” / 710 mm
Shipping height 41 3/4” / 1060 mm 41 3/4” / 1060 mm
Shipping depth 30 11/16” / 780 mm 30 11/16” / 780 mm
Table 1
ENGLISH
Standard cycle time may vary should the inlet water temperature be different from that indicated above.
7
23 5/8"
23 5/8"
600 mm
20"
508 mm
2"
50 mm
38 3/8"
975 mm
2 3/4"
70 mm
17"
431 mm
1 3/4"
44 mm
29 1/2"
750 mm
39 3/8"
1000 mm
1 1/2"
40 mm
23 5/8"
600 mm
6 1/4"
157 mm
1 1/4"
32 mm
17"
431 mm
14 7/8"
379 mm
33 1/2"
850 mm
32 1/4"
820 mm
600 mm
38 3/8"
I
975 mm
A
I
32 1/4"
820 mm
6 1/4"
157 mm
1 1/4"
32 mm
Q
A
C
I
S
Y
Y
I C A
S
20"
508 mm
431 mm
14 7/8"
379 mm
17"
==
2"
50 mm
23 5/8"
600 mm
33 1/2"
850 mm
29 1/2"
750 mm
-
39 3/8"
1000 mm
Q
Figure 4
1 1/2"
40 mm
1 3/4"
44 mm
S
Y
431 mm
17"
2 3/4"
70 mm
Legend Figure 4
A - Water inlet pipe with 3/4”dia/19mm fittings
C - Outlet pipe 1 5/8” ID /40 mm (^) –11/16” ID /18 mm (*).
I - Power supply
S - Detergent connection
Q - Equipotential (Ground) screw
Y - Rinse aid connection
(^) - Only for model with free-fall drainage
(*) - Only for model with drain pump
8
Loading...