Electrolux EXACTA CONTROL DATASHEET

Washer extractor

Exacta Control(R)

Features and beneﬁts

• The Exacta Control(R) is a highly accurate microprocessor control offering precision and ﬂexibility in the wash process.

• All important parameters for a superior wash and rinse performance such as water levels, temperatures, drum actions, extraction speeds and detergent supply are controlled by the Exacta Control(R).

• The Exacta Control(R) is available is many different versions with customized user panels and wash programs.

• The Exacta Control(R) is semi-programmable. It is possible to add, modify or delete program sequences to suit special requirements. For details, see table on page two.

Exacta Control(R) offers:

• Seven program selection buttons. The number of buttons in use may vary depending on customer wash program. See details on page two.

• Four buttons for additional functions. The number of buttons in use may vary depending on customer wash program. See details on page two.

• One combined button for Start, Pause and Rapid advance.

• Display can show; total program time, vending price (machines with payment), error codes and remaining program time. Actual water temperature (option, special version).

• Automatic cool down cycle.

• Automatic display of 25 error codes.

• Automatic buzzer end signal.

• Built-in service program for checking various machine functions, e.g. water valves, motor rotation, motor speed, drain valve and heating system.

• RS 232-connection for communication with external payment and management systems.

Share more of our thinking at www.electrolux.com

Art. No. 438918051/07 08.22

We reserve the right to alter speciﬁcations without notice.

Customized programming

Add up to 5 extra Change program time ± 20 mins. Change water level, same in all programs Change temperature ± 38 degrees Delete or add up to 5 extra Switch-off Reduce G-force

* Ind. = individual for each program

Pre-rinse(s) Pre-wash Main wash Rinse(s) AWS Final extr.

•

• Ind.*

• • •

• Ind.*

•

The Exacta Control(R) is semi-programmable. It is possible to modify the parameters shown in below table. Note: it is only possible to modify the parameters of the standard programs under paragraph 1 and 2 above. Contact authorized service partner.

www.electrolux.com/laundrysystems