Electrolux EX401ISB User Manual

2mm

600mm

596mm

550mm

820mm - 900mm

min. 818mm

max. 898mm

Drain hose supplied

240V switched power outlet

Inlet hose supplied

Cold water supply

Waste

Loop drain hose and locate 10mm beneath benchtop

IMPORTANT

This is a guide of product dimensions only. For complete installation instructions, refer to the manual provided with product.

dishwasher dimensions and pre-installation instructions

installation guide

electrolux E:Line built-in dishwasher

Model: EX401ISB

Note: Rear leg adjustment

via screw at front

Notes:

• If the floor is not level, the levelling legs should be adjusted to fit

• The dishwasher must be fixed to the cabinets with the screws provided

• The entire plastic membrane from the sink trap to be removed before fitting and securing the drain hose

• Cold water connection is recommended

• Water flow rate10L/minute min.

• Water temperature 65° max.

• Water pressure cold, 50-800kPa

• Water pressure hot, 50-800kPa

Note: Hole at bottom of spigot on sink drain must be drilled out completely. Position of spignot from base of dishwasher floor must be 300mm minimum. Maximum height of drain hose from floor must be 1000mm.

Notes:

• Ensure that hoses are not crushed or kinked under or behind the dishwasher.

• After connecting hose to the tap, turn the tap on and check to ensure that there are no leaks.

All measurements in millimetres.

Page 1 of 2

Thickness: 16mm - 26mm

595mm

height of door determined by cabinet and kickboard height

min. 2kg max. 10kg

IMPORTANT

This is a guide of product dimensions only. For complete installation instructions, refer to the manual provided with product.

ﬁtting door panel

Note: Refer to instructions and pattern

supplied with dishwasher for hole locations and dimensions

installation guide

electrolux E:Line built-in dishwasher

Model: EX401ISB

step 2step 1

step 3

Note: Ensure that the dishwasher is fixed to cabinet

step 4 step 5

All measurements in millimetres.

Page 2 of 2

Note: Ensure that there is clearance between door panel and kickboard, reduce height of kickboard if necessary.