Electrolux E57co60ess, E57nk60ess, E57lk60ess, E57nb60ess, E57lb60ess Owner's Manual

U s e

57" Stainless Steel Gas Grill

Welcome & ratulations

Congratulations on your purchase of a new grill! We at Electrolux Home Products are very proud of our product and we are completely committed to providing you with the best service possible.

Your satisfaction is our #1 priority.

Please read this Use & Care Manual very carefully. It contains valuable information on how to properly maintain your new grill.

We know you'll enjoy your new grill and thank you for choosing our product. We hope you consider us for future purchases.

PLEASE READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual provides specific operating instructions for your model. Use your grill only as instructed in this manual. These instructions are not meant to cover every possible condition and

situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.

Please record your model and serial numbers below for future reference. This information is found on the serial plate located on the back of the built-in grill or on the inside of the cart door for

complete grill & cart model.

Questions?

1-800-320-0859

www.electroluxusa.com

Please record grill information for future reference and service work:

Model #:

Serial #:

Date of Purchase:

Gas Type:

TABLE OF CONTENTS

Welcome/Product Registration ...................................................................... 1

General Safety Instructions .......................................................................... 2

Grill Features & Components ...................................................................... 3-4

Grill Assembly/Built-In Instructions ............................................................ 5-9

Gas Requirements/Leak Testing ................................................................ 10-12

Lighting the Grill ............................................................................................ 13

Using the Grill (Rotisserie/Side Burner Usage) ........................................ 14-16

Care & Maintenance ...................................................................................... 17

Troubleshooting Your Grill ........................................................................ 18-19

Warranty .......................................................................................................... 21

Please retain this manual for future reference

General Instructions

IMPORTANT SAFETY INFORMATION

- Read this manual carefully before using your grill to reduce the risk of fire, burn hazard or other injury.

- Extreme care should be used because of the high temperatures

produced by this appliance. CHILDREN SHOULD NOT BE LEFT UNATTENDED IN ANAREAWHERE THE GRILL IS BEING OPERATED.

- This appliance must be kept clear from combustible materials, gasoline or other flammable vapors and liquids. Do not allow flammable materials to come in contact with grate, burner or hot surfaces.

- Use only outdoors and provide good ventilation to avoid carbon monoxide build-up which could result

in injury or death.

- Do not repair or replace any part of this appliance unless it is specifically recommended in this manual. A qualified service technician should conduct all other service.

- Follow the installation and servicing instructions provided with this product. Have your grill installed

by a qualified service technician.

- Locate the main gas supply valve so that you know how to shut the gas off to your grill.

- If you smell gas, make sure all gas connections are tight before operation. If you continue to smell gas call a qualified technician.

- When lighting a burner, always pay close attention to what you are doing and be certain you are

pushing the igniter that lights the burner you intend on using.

- Always keep your face and body as far away as from the grill as possible when lighting to reduce the

risk of burn.

- Extinguish all flames and do not smoke while engaging gas and igniting the grill.

Grill Features: E57

1. Roll top grill hood

2. Grilling/cooking surface

3. Side shelf

4. Control knob: back infrared burner

5. Control knobs: main burners

6. Warming drawer

7. Hood handle

8. Warming shelf

10. Electronic igniter: bottom infrared and side burner

11. Cart with doors and drawers

12. Drip pans

13. Dual side burners

14. Control knobs:side burner

15. Control knob: bottom infrared burner

16. Electronic igniter: main burners and back infrared

9. Infrared back burner

NOTE: Cart, side burner and side shelf are not included with the head only units.

Grill Assemb

IGNITER ATTACHMENT

Cap Battery

Fig. 1

1. Remove the igniter cap, spring assembly, battery and lock nut from Igniter. (See Fig. 1)

Insert the threaded section of the igniter into the U-shaped cut out of the igniter mounting bracket. (See Fig. 2)

Insert the threaded section of the igniter through the hole in the shelf and secure to shelf using the lock nut. (Use the igniter assembly diagrams to determine which igniter goes with which shelf.) Tighten securely. (See Fig. 3)

Re-insert the battery, positive side first, and spring assembly and attach the igniter cap. (See Fig. 4)

Repeat above steps for second igniter on the other shelf.

Bracket

Fig. 2

Fig. 3

E57 IGNITER ASSEMBLY

Right shelf (three wire) Left shelf (three wire)

Fig. 4

Side Shelf/Side Burner Assembly

SIDE SHELVES ATTACHMENT

1, Loosen the bolts on the side of the grill and

attach the shelf by allowing the bolt heads to fall through the large opening in the bottom of the

keyhole slots, Then slide the shelves downward until the bolts are resting against the top of the

key hole slots. Tighten all of the shelf bolts, (See Fig, 5-6)

2, Attach the wires coming out from the sides of

the grill to the Igniter terminals, (See Fig, 7)

3, Repeat for second side shelf

Fig. 5

Note: It does not matter which wire goes to which terminal on the three wire igniters.

INSTALLING SIDE BURNER PLATES

1. There are two (2) black burners and caps that need to be installed for the side burner to operate

correctly.

2, Place the burner and cap on top of the one

burner. (repeat step for second burner.) (See Fig, 8-10)

3, Replace grate on top of the dual burners.

(See Fig, 11)

Fig. l0

Fig. 6

Fig. 7

Fig. 8

Fig. II Fig. 9

+ 15 hidden pages