Electrolux AOS101ECH2 User Manual

Technical Bulletin

Identification:
Bulletin no:
Date:
Issuer:
Factory:

Subject:

Model:

Problem:

Reason: Bad alignment between the tile and the water outlet of the

Action in
Factory:

Action in
Field:

The new design of the basement tile:

E01

VT2006-01
15-02-2006
Customer Support Dept.
Pordenone (Italy)

NEW COOLING UNIT BASEMENT

Heavy Duty cabinets 1400 L (2 doors).

The condensed water doesn’t flow into the evaporation basin, but drops out the tile across the front panel and the frames.

evaporator basement.

The new basement is in production starting from week 3/2006.

In case of water leakage on appliance with the old basement:
make an extra seal all around the tile with silicon (as shown in the picture

on page 2

).

ELECTROLUX PROFESSIONAL p. 1 of 2
VIALE TREVISO, 15 – 33170 PORDENONE – ITALY

TELEPHONE: TELEFAX: E-MAIL:

+ 39 0434 380 736 + 39 0434 380 740 [e-mail]

Technical Bulletin

Identification:
Bulletin no:
Date:
Issuer:
Factory:

The tile and the water flow on the old basement:

E01

VT2006-01
15-02-2006
Customer Support Dept.
Pordenone (Italy)

If the water flows as described in #2 we suggest to seal with silicon all around the tile:

Warning:make sure to dry the parts before sealing.

ELECTROLUX PROFESSIONAL p. 2 of 2
VIALE TREVISO, 15 – 33170 PORDENONE – ITALY

TELEPHONE: TELEFAX: E-MAIL:

+ 39 0434 380 736 + 39 0434 380 740 [e-mail]