Boeing Stearman PT-17
Specification:
Length : 1854mm(73〞)
Upper wing span: 2438mm(96〞)
Lower wing span: 2388mm(94〞)
Upper wing area: 86sq.dm (9.2sq.ft)
Lower wing area: 87.5sq.dm (9.4sq.ft)
Wing loading : 77.8g/sq.dm(25.5oz/sq.ft)
Flying weight : 13.5kg(29.7lbs)
Radio : 6ch & 6servos
Engine : 100cc
SAFETY PRECAUTIONS
INSTRUCTION MANUAL
First-time builders should seek advice from people having building
experience.If misused or abused,it can cause serious bodily injury
and damage to property.
Fly only in open areas and preferably at a dedicated R/C flying site.
We suggest having a qualified instructor carefully inspect your
airplane before its first flight.Please carefully read and follow all
instructions included with this airplane,your radio control system
and any other components purchased separately.
(The people under 18 years old is forbidden from flying this model)
This R/C airplane is not a toy!
: 4-cycle .120
27"X10
Spinner nut
6
(with 8 servos),
6
6
6 channel radio for aiplane is highly recommended for this model.
Warning
Remove the covering with proper
pressure to cut through only the covering itself.Otherwise,
cutting down into the balsa structure may weaken the
model part and cause accident.
The pre-covered film on ARF kits may wrinkle due to
variations of temperature.Smooth out as explained right.
Pre-cover the covering with clean cloth!
Start at low setting. Increase the setting if
necessary.If it is too high,you may damage
the film.
Iow setting
with cover(cloth)
The front view when the install completion.
The top view when the install completion.
21
97
98
Fuselage
Cover plate
Cover plate
landing gear cover
Rudder
Cockpit
Upper wing
Aileron Aileron
Stabilizer
Elevator
Cowling PVC
Dummy engine
PVC PVC
PVC PVC
Lower wing
Boeing Stearman PT-17 packing list
1
Top view
Position for
right diagram.
ELEVATOR
Adjustment of the elevator,be sure it can work perfectly.
166mm
166mm
Centre of the Gravity.
50mm
50mm
The side view when the install completion.
60mm
60mm
Top view
RUDDER
Side View
Adjustment of the rudder, be sure it can work perfectly.
20
93
94
96
95
12
TP Screw (2.3x12mm)
Screw (5x35mm)
Screw (2x16mm)
Screw (3x16mm)
4
2
4
18
4
Collar (3mm)
2
Collar (2mm)
Collar (5mm)
2
2
1
4
2
Screw (2x10mm)
2
12
Nut(2mm )
6
Nut(4mm )
Nut(3mm )
2
Screw (3x10mm)
40
Washer(2x6mm)
Washer(3x6mm)
Washer(4x8mm)
46
4
34
1
1
12
Washer(5x10mm)
8
Washer(6x12mm)
6
4
2
Screw (5x20mm)
4
Screw (4x35mm)
1
Screw (6x35mm)
2
1
2
1
Lock Nut(4mm )
2
Screw (4x25mm)
5
Screw (3x10mm)
2
Screw (6x15mm)
2
Screw (6x45mm)
2
2
4
Blind Nut(5mm)
Wheel(140mm)
Wheel(45mm)
Rod (2.5x300mm)
Rod (2x300mm)
Control horn(2mm)
Wing skids
Wing skids
Wing skids
Wing skids
Control horn(3mm)
Aluminum tube (3x6mm)
Linkage Stopper
Clevis(2mm)
Clevis(3mm)
Plastic tube (2x400mm)
16
Fuel tank (550cc)
Cable tie
Rod (2x250mm)
Steel wire (0.5x350mm)
8
Steel wire (0.5x1700mm)
2
Steel wire (0.5x900mm)
8
2
2
2
2
Wing strut
2
2
Wing strut
Wing strut
2
Wing strut
2
2
Wing strut
2
Ply
2
Ply
2
Ply
Wing skids
Wing skids
2
2
2
Nose landing gear
Plastic tube (4x18mm)
4
Oil tank mount
1
Tail landing gear
1
2
Copper joiner
1
Stabilizer joiner (12x485mm)
1
Stabilizer joiner (12x330mm)
4
Aluminum plate
Aluminum plate
1
Upper wing joiner (25x1135mm)
1
Lower wing joiner (25x925mm)
1
Double-sided adhesive
1
Servo mount
Boeing Stearman PT-17 packing list
Package1 Package4
Packaeg5
Package2
Package3
2
45mm
45mm
AILERON
Adjustment of the aileron and flap,be sure they can work
perfectly.
AILERON
AILERON
The specification of the cowling.
Cut off the suplus from the cowl to fit the engine well.
192mm
285mm
50mm
Drill holes to appropriate position in the cowling and assemble
the cowling to the fuselage with screws as illustration.
6
Screw (3x10mm)
Epoxy the dummy engine to the cowl.
Fix the fuselage top cover to the fuselage with screws as
illustration.
2
Screw (3x16mm)
Washer (3x6mm)
2
92
19
87 90
88
91
89
Loading...