Eemax EX180T2T, EX180T2T EE, EX180T2T S, EX180T2T ML, EX180T2T FS User Manual

Three Phase™	Specifications
Triple Module, Commercial/Industrial Thermostatic 3-Phase Heater	Tankless Electric Water Heater

Applications

•Eye/face wash

•Where tepid water is needed

•Multiple lavatories

•Restaurants and other food service requirements

•Booster applications

•Manufacturing and wash down processes

•Commercial and industrial

Performance Features

•Hot or cold water feed

•Available electrical models are 480V Delta (ED models) or 208V Delta (EX models) no neutral leg required

•Fitted with 1/2" compression fittings and electrical entry on the bottom

•Built in over temp protection

•Flow switch activates heater only on demand (no standby heat loss)

•Save water – "Point of use application"

•Continuous hot water – no storage capacity to run out

•Factory set temperature available. Range ambient to 180°F

•Capacity to 5 GPM (T3 only), 4 GPM (T2T)

•Thermostatic control. Microprocessor provides stable outlet temperatures

•Warranty, five (5) years limited on leaks, one (1) year parts

•Field serviceable replaceable cartridge element

Optional Features

	Assembled
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372	In USA

Electrical configuration and requirements

All Eemax three phase units are custom made to order and as such, are non-returnable and non-refundable. Check your electrical supply, making sure all criteria for operating your Eemax water heater are met.

	Eemax 600V, 480V and 208V	L1
	Three Phase Units Delta Configuration	L2
	Requires: 3 Lives and 1 Ground (earth)
		L3

•Emergency eye/face wash ANSI Z358.1 (EE)

•Factory set ambient to 180°F (FS)

•Multi lavs 0.3 turn on. Staged up to 4 lavs 105°F-110°F temp setting, aerators supplied (ML)

•Sanitation 180°F (S)

•N4, N4X (304SS) enclosures

Product Specifications:

Dimensions:	18.25" x 12.25" x 4.5"
Weight:	15 lb
Cover:	Powder Coated Steel
Color:	White
Element:	Triple replaceable Nichrome cartridge elements
	insert
Fittings:	1/2" compression fittings at bottom of unit
Min. Dynamic Operating Pressure:	25 PSI
Max. Dynamic Operating Pressure:	150 PSI

U.S. Patent #'s: 4,762,980 and 4,960,976

Special Design Service

Inquiries for units for unique applications are welcome. Call our Technical Service department at 1-800-543-6163.

Suggested Specification

Tankless water heater shall be an Eemax "Three Phase" model number _________________________.

Element shall be replaceable cartridge insert. Element shall be iron free, Nickel Chrome material. Heater shall be fitted with 1/2" compression fittings. Heater shall be installed upright with water connections on bottom. Hot water storage tanks prohibited. Unit shall be Eemax or approved equal.

NOTE: Refer to rating chart for product information. Enclosure to be fitted with the following features:

_____ EE Emergency Eyewash. Meets ANSI tepid water requirements

_____ FS Factory Set. Customer specified factory-set not to exceed temperature ambient to 180°F

_____ ML Multi lavs 0.3 GPM turn on, staged up to 4 lavs 105°F-110°F temp setting, aerators supplied

_____ S Sanitation. Factory preset not to exceed temperature of 180°F

_____ N4 NEMA 4 steel cabinet with powder coat finish

_____ N4X NEMA 4 stainless steel, corrosion-resistant cabinet

Information and product specifications contained in this document are subject to change without notice. REV 2020-01