MiniTank™ |
Specifications |
1.5, 2.5, 4 and 6 Gallon MiniTanks Deliver Hot Water Efficiently |
Electric MiniTank Water Heater |
|
|
|
|
|
|
Performance Features
•Point-of-use heating eliminates long hot water pipe runs
•Compact design fits virtually anywhere
•Easy and ready to install
•Hot or cold water feed
•Adjustable temperature control 50°-140°F
•T&P relief valve included
•Enameled glass lined tank for extended life
•Floor and wall mountable, wall bracket included
•Field replaceable element
•ETL tested to UL 174 and NSF 372
•EMT1, EMT2.5 and EMT4 plug into standard outlets, cord included. EMT6 must be hard wired, pig tail included
•Single weld design
•Tank status indicator light – Green: ready mode
Red: heating mode
•Warranty, five (5) years limited on leaks, two (2) years on defects
Product Specifications
Voltage: |
120V |
Amperage: |
12 A |
Heating Capacity: |
1440 watts |
Phase: |
Single |
Temperature Range: |
50°F-140°F |
Maximum Operating Pressure: |
150 PSI |
|
|
Tank |
|
|
Recovery time |
|
|
Volume |
Weight |
|
based on 60° |
|
|
(gal) |
(lb) |
Fittings |
temp. rise |
|
EMT1 |
1.5 |
11.7 |
1/2" NPT connections at TOP of unit |
8 minutes |
EMT2.5 |
2.5 |
15.5 |
1/2" NPT connections at TOP of unit |
15 minutes |
|
EMT4 |
4.0 |
19.3 |
1/2" NPT connections at TOP of unit |
24 minutes |
|
EMT6 |
6.0 |
24.9 |
3/4" NPT connections at TOP of unit |
37 minutes |
|
Special Design Service
Inquiries for units for unique applications are welcome. Call our Technical Service department at 1-800-543-6163.
Suggested Specification
EMT4 |
EMT6 |
EMT1 |
EMT2.5 |
*The wetted surface of this product contacted by water contains less than 0.25% lead and meets NSF/ANSI 372
|
C |
A |
|
D |
B |
|
E |
|
F |
H |
G |
|
Dimensions |
EMT1 |
EMT2.5 |
EMT4 |
EMT6 |
||||
Key |
inch |
mm |
inch |
mm |
inch |
mm |
inch |
mm |
A |
9.83 |
249.7 |
11.25 |
285.8 |
12.76 |
324.1 |
14.24 |
361.7 |
B |
3.03 |
77.0 |
3.13 |
79.5 |
3.94 |
100.1 |
3.35 |
85.1 |
C |
9.72 |
246.9 |
10.91 |
277.1 |
12.27 |
311.7 |
13.85 |
351.8 |
D |
3.94 |
100.1 |
3.94 |
100.1 |
3.94 |
100.1 |
3.94 |
100.1 |
E |
5.08 |
129.0 |
5.61 |
142.5 |
6.46 |
164.1 |
7.52 |
191.0 |
F |
15.09 |
383.3 |
16.89 |
429.0 |
18.03 |
458.0 |
20.79 |
528.1 |
G |
14.29 |
363.0 |
16.09 |
408.7 |
17.31 |
439.7 |
20.01 |
508.3 |
H |
2.52 |
64.0 |
2.52 |
64.0 |
2.52 |
64.0 |
2.52 |
64.0 |
*Mounting bracket location on the back of unit
Water heater shall be an Eemax MiniTank model number EMT______.
Unit shall be enameled glass lined with a single weld design. Water connections and supplied T&P valve to be located on top of the unit. Unit shall have an status indicator light with adjustable thermostat. Unit to have a 5 year warranty against leaks.
Certified to UL174.
Information and product specifications contained in this document are subject to change without notice. REV 2020-01 |
31 |
Loading...