Page 1
Congratulations on purchasing an EDISON piccollino LED
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries Documentation Service note
1
2
1
HDMI in
2
HDm i
kabel
HDMI
kabel
Antenna cable
SCART
DC 12V/1,5 A
S/PDIF HDMI
LNB IN 13/18V
400mA MAX
ETHERNET
Receiver piccollino LED
Notes: The front is factory tted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1
Infrared sensor for the reception of remote
control commands
2
Display LED, displays current information
3
Card reader
Back Panel
4
LNB IN: Connection for the coaxial cable
to the signal from the satellite system
5
S/PDIF: Audio interface for amplier/audio console
6
HDMI: Connection to an HDTV quality TV
7
ETHERNET: Ethernet port RJ45 10/100 Mbps
8
SCART: For connecting to a TV set,
using SCART cable [not for HD TV]
9
Connection for an adapter (DC 12V/1,5A)
Subpage
10
/ 2 x USB: Connection for USB storage devices
Note: For interference-free satellite TV reception,
a specialist technician must calibrate your satellite
TV system with a digital TV level meter
•
Connect the receiver using HDMI cable via the
HDMI output port to your TV’s HDMI input port
•
Now connect the receiver to the satellite
antenna cable via the LNB IN input.
•
Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
•
Connect the receiver to the power supply.
•
The receiver starts with the BOOT process and
is operational within a short time
Please contact
your EDISION
specialist dealer
for any further
support
and service.
Power socket
HDMI:
Output receiver
HDMI cable
TV set connection panel
Use an HDMI input!
LNB IN:
Connecting
the cable to the satellite
signal
piccollino LED
FullHD SAT Receiver
35mm
110mm
146mm
piccollino
1 2
10
SCART
DC 12V/1,5 A
S/PDIF HDMI
LNB IN 13/18V
400mA MAX
ETHERNET
4
5
6
7
8
9
3
Page 2
3
Visit us on:
www.edision.gr
Insert/replace batteries in(to) the remote control
When inserting the batteries (2XAAA), observe the correct polarity. When
the remote control is not in use for a long period of time, please remove the
batteries to avoid possible damage to the remote control. If the batteries are
dead, dispose of them properly and in an environmentally friendly manner,
and not with household waste.
piccollino LED
FullHD SAT Receiver
Remote control
Notes: Many of the listed buttons have multiple functions, which, are displayed in the menus. Some buttons and functions are optional.
Important functions and buttons are briey explained below. The buttons to be used are marked in red in the diagrams.
You are watching a channel, but now want to switch to another channel
›› How to switch between channels ....
You are watching a TV program or listening to a radio program and now want
to change the volume ›› How to change the volume on the receiver ....
The channel list displays all the installed channels
›› How to use the channel list ....
›› How to use the
main menu ....
Option 1
Use the up-down arrow
buttons while watching
television to select
another channel.
Option 1
In TV or Radio mode, press
the right arrow key to
increase the volume.
Press the left arrow key to
decrease the volume.
Press the MENU button
to call up the main menu.
Use the arrow buttons
to navigate between the
menu items and the OK
button for selecting.
Press the EXIT button to
exit the menu structure.
Option 2
Enter, via the number
buttons, the number
of the channel that
you want displayed.
Enter the number 0
via the ZOOM button.
Option 2
Ιn TV or the radio node, press
the symbol «plus» key VOL to
increase the volume. Reduce
the volume by pressing the
icon «minus» key VOL.
Option 3
Call up the channel list
via the OK button.
Use the arrow buttons to
navigate to the channel
you want to select.
Press the OK button
to select the channel.
Option 3
Press the MUTE button in
TV or Radio mode to switch
off the sound completely.
Repeated pressing of
the MUTE button switches
the sound back on
.
On/Off button.
Mute On/Off.
Starts recording manually.
Start playing the TimeShift function and /
or a Recording.
Back to normal recording speed.
Finishes TimeShift, a recording or a playback
.
Pauses playback.
Scrolls listings per page backward.
Fast Possibility backwards.
Scrolls listings per page forward.
Fast-forward capability.
Returns to the start, alternatively
to the previous recording..
Switches to the end, alternatively
to the next recording.
Displays a le list..
Show bar TimeShift.
Displays a le-list.
Allows you to set the time at which the Receiver
autom. switches to standby mode.
Calls up the Audio menu.
Changes the display TV standard.
Calls up the Subtitle/Teletext menu.
Switching between TV and Receiver
Displays the main menu.
Displays the information bar.
With the arrow keys you can scroll
in the lists up and down, left and
right or regulate the volume.
With the OK-key you conrm your
menu-entry or activate the channel-list.
Exits a Menu/Dialogue window
Selection of the electronic program
guide EDIVISION.
Use the Page button in the
right column of the menu
to scroll page by page
through the channel lists.
The INFO button displays
information about a
channel. The FIND button
searches for channels.
Depending on which
column of the menu of the
channel list you are, you
can call up other functions
and menus with the
coloured buttons. These
possible functions are
displayed in the lower
section.
Press the OK button in TV
or Radio mode to call up
the channel list. Use the
arrow buttons and OK
button to navigate the
menu. The EXIT button
closes the list.
Scrolls up (+) or
down (-) in
lists of channel lists.
Scrolls up (+) or
down (-)
change the volume.
Displays the favourite lists.
Displays the satellite lists (optional).
Selection of TV/Radio program.
Input of numbers or letters in
the menus.
Toggles between TV and Radio mode.
Entering the number 0 / enlarges the image..
Returns to the previous program.
Loading...