OS MIO + 4K S2X + S2/T2/C
4 K L i n u x C o m b o R e c e i v e r
Congratulations on purchasing an EDISION OS MIO + 4K S2X + S2/T2/C
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
1 Unpacking
Remote control with 2 AAA batteries |
Documentation |
Service note |
180mm
130mm 38mm
Receiver EDISION OS MIO + 4K S2X + S2/T2/C
Notes: The front is factory fitted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Please contact your EDISION specialist dealer for any further support
and service.
Front Panel
1POWER button: Activates/Deactivates the device
2CH- / CH+ buttons: for moving in the program lists
3Infrared sensor for the reception of remote control commands
4Display OLED, displays current information
POWER |
CHCH+ |
3 |
OS mio+ 4K |
|
|
4 |
|
1 |
2 |
|
|
|
|
Back Panel
5 |
LNB B S2 IN: Connection for the coaxial cable |
|
|
|
|
|
|
|
|
|
|
6 |
to the signal from the satellite system |
15 |
|
|
|
|
15 |
|
|
|
16 |
Input for connecting to terrestrial or cable signal from the antenna |
|
|
|
|
|
|
|
||||
7 |
LNB A S2X IN: Connection for the coaxial cable |
WIFI |
|
|
|
|
WIFI |
|
|
|
|
8 |
to the signal from the satellite system |
|
|
|
|
|
|
|
|
|
|
S/PDIF:Audio interface for amplifier/audio console |
|
|
|
|
|
|
|
|
|
|
|
9 |
HD OUT: Connection to an HDTV quality TV |
400mA MAX |
T2/C |
400mA MAX |
S/PDIF |
HD OUT |
ETHERNET |
USB 2 |
IR IN |
RS232 |
DC 12V/2A |
|
LNB B S2 IN13/18V |
ANT IN |
LNB A S2X IN 13/18V |
|
|
|
|
|
|
||
10 |
ETHERNET: Ethernet port RJ45 10/100 Mbps |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
11 |
/ USB 2: Connection for USB storage devices |
|
|
|
|
|
|
|
|
|
|
12 |
IR IN: Infrared connection port |
|
|
|
|
|
|
|
|
|
|
13 |
RS 232: For connecting to a PC, |
|
|
|
|
|
|
|
|
USB 1 |
|
14 |
using RS-232 cable, for receiver software update |
|
|
|
|
|
|
|
|
|
|
Connection for an adapter (DC 12V/2,0A) |
|
|
|
|
|
|
|
|
|
|
|
15 |
WiFi: 2 x External Antennas 5G/2.4G |
|
|
|
|
|
|
|
|
|
|
16 |
Card reader |
|
|
|
|
|
|
|
|
17 |
|
|
Subpage |
LNB B: Connecting |
|
|
|
|
|
|
|
||
17 |
/ USB 1: Connection for USB storage devices |
the cable to the satellite |
|
|
|
|
|
|
|
||
signal |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
||
2 Connecting and switching on |
|
|
|
ANT IN: coaxial-wire |
|
|
|
|
|
|
|
|
|
input from terrestrial / |
Note: For interference-free satellite TV reception, |
|
|
|
cable signal |
|
|
|
|
|
a specialist technician must calibrate your satellite |
Antennawire-coaxial |
cable Antenna |
Antennawire-coaxial |
LNB A: Connecting |
TV system with a digital TV level meter |
signal |
|||
|
|
|
the cable to the satellite |
|
• Connect the receiver using HDMI cable via |
|
|
|
TV set connection panel |
the HD OUT output port to your TV’s HDMI input port |
|
|
|
|
|
|
|
Use an HDMI input! |
|
• Now connect the receiver to the satellite and |
|
|
|
HDMI in |
antenna cable via the ANT IN, LNB A or LNB B input. |
|
|
|
2 |
WIFI |
|
|
WIFI |
|
|
|
|
||
|
|
|
|
1 |
• Insert the batteries into the remote control. |
LNB B S2 IN13/18V |
ANT IN |
LNB A S2X IN 13/18V |
S/PDIF HD OUT ETHERNET USB |
Notes on the remote control can be found on |
400mA MAX |
T2/C |
400mA MAX |
|
|
|
|
i |
|
|
|
|
|
|
the back of these instructions. |
HD OUT: |
|
HDMI |
|
|
|
kabel |
||
• Connect the receiver to the power supply. |
Output receiver |
Power socket |
||
• The receiver starts with the BOOT process |
|
|
|
|
|
|
|
|
|
and is operational within a short time |
|
|
|
HDMI cable |
The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support
Loading...